Uživatelská příručka k skládacímu stojanu pro volant ARES WING pro závodní simulátory (model GRS1005BK)

1. Úvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your ARES WING Foldable Sim Racing Wheel Stand with Chair Fixing Slot. Please read this manual thoroughly before use to ensure proper setup and to maximize your racing experience. This stand is designed to be compatible with a wide range of racing accessories and gaming platforms.

2. Bezpečnostní informace

• Před každým použitím se ujistěte, že jsou všechny šrouby a upevňovací prvky bezpečně utaženy, aby se zabránilo nestabilitě.
• Během nastavování držte ruce a prsty v dostatečné vzdálenosti od pohyblivých částí, abyste zabránili jejich skřípnutí.
• Do not exceed the recommended weight limits for attached racing equipment.
• Umístěte stojan na rovný a stabilní povrch, aby se nepřevrátil.
• Store the stand in a safe location when folded to prevent accidental falls.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny součásti. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• Sestava hlavního rámu
• Talíř volantu
• Pedálová deska
• Držák řazení
• Chair Fixing Slot Extension
• Hardware Kit (bolts, nuts, washers, Allen keys)
• Stahovací pásky pro vedení kabelů
• Návod k použití

4. Nastavení a montáž

Assembly typically takes approximately 15 minutes. Follow these steps carefully.

4.1 Vybalení a počáteční kontrola

Carefully remove all components from the packaging. Lay them out and compare with the package contents list to ensure everything is present and undamaged.

4.2 Sestava hlavního rámu

Unfold the main frame of the stand. Ensure all locking mechanisms click into place securely. The triangular frame design provides enhanced stability.

Figure 4.2.1: Fully assembled ARES WING Sim Racing Wheel Stand, showcasing its robust structure and integrated chair fixing slot. Racing wheel, pedals, and shifter are not included.

4.3 Attaching the Steering Wheel Plate

Attach the steering wheel plate to the main frame using the provided hardware. Ensure it is oriented correctly for your preferred setup. The plate features pre-drilled holes for various racing wheel brands.

4.4 Installing the Pedal Plate

Secure the pedal plate to the base of the stand. This plate is adjustable to four different angles for optimal pedal positioning.

4.5 Mounting the Shifter

The shifter mount can be installed on either the left or right side of the stand, depending on user preference. Use the appropriate hardware to secure it firmly.

4.6 Securing the Chair Fixing Slot

Attach the chair fixing slot extensions to the front base of the stand. These extensions are designed to hold your gaming chair in place, preventing unwanted movement during intense racing sessions. The depth is adjustable to accommodate different chair sizes.

Figure 4.6.1: Detail of the adjustable chair fixing slot and anti-slip feet, designed to secure a gaming chair and prevent movement.

4.7 Attaching Racing Equipment

Mount your racing wheel, pedals, and shifter to their respective plates using the hardware provided with your racing equipment. The stand features pre-drilled holes compatible with major brands.

Figure 4.7.1: The stand demonstrates wide compatibility with racing accessories from Logitech (G25, G27, G29, G920, G PRO), Fanatec, and Thrustmaster. Racing gear is not included.

5. Návod k obsluze

5.1 Nastavení výšky a úhlu

The steering wheel platform offers a tilt adjustment range from -15° to +15° and a height adjustment of 6.6 inches. Loosen the adjustment knobs, set to your desired position, and re-tighten firmly.

Figure 5.1.1: Visual representation of the adjustable features, including 6.6-inch height adjustment, 12°/16°/20°/24° pedal tilt, and -15°/0°/+15° wheel panel tilt. The shifter mount supports both left and right side installation.

5.2 Pedal Platform Adjustment

The pedal platform can be adjusted to four different angles: 12°, 16°, 20°, and 24°. Select the angle that provides the most comfortable and ergonomic foot position for your racing style.

5.3 Ergonomický komfort

The upgraded frame design provides ample leg space (21.8 inches wide) for extended gaming sessions. Adjust all components to achieve your optimal driving position.

Figure 5.3.1: A user demonstrates the comfortable wide leg space (21.8 inches) and maximum height (32.3 inches) of the stand, allowing for prolonged play without discomfort.

5.4 Skládání pro skladování

The stand features a foldable design for convenient storage without needing to remove your racing equipment. Release the locking mechanisms, fold the stand, and use the included self-adhesive tie to secure it in its compact form.

Figure 5.4.1: The stand can be easily folded for compact storage, even with racing gear attached. A self-adhesive tie is included to keep it secure in the folded position.

6. Údržba

• Čištění: Otřete stojan měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Kontrola upevňovacích prvků: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability.
• Skladování: When not in use, fold the stand and store it in a dry, cool place away from direct sunlight or extreme temperatures.

7. Řešení problémů

7.1 Stojan se zdá být nestabilní

• Ujistěte se, že všechny montážní šrouby jsou zcela utažené.
• Zkontrolujte, zda je stojan umístěn na rovném a vodorovném povrchu.
• Check that the chair fixing slot is properly engaged with your gaming chair to prevent chair movement.

7.2 Racing Equipment Does Not Fit

• Confirm that your racing wheel, pedals, and shifter are compatible with the pre-drilled mounting holes (Fanatec, Thrustmaster, Logitech, Moza, Simagic).
• Some equipment may require specific mounting brackets not included with the stand. Refer to your equipment's manual.

7.3 Difficulty Adjusting Components

• Ensure adjustment knobs or levers are fully loosened before attempting to change positions.
• Do not force adjustments. If a component is stuck, re-check the manual for correct procedure.

8. Specifikace

Figure 8.1.1: Detailed product dimensions for both unfolded and folded configurations.

9. Záruka a podpora

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ARES WING website. Please have your model number (GRS1005BK) and purchase date available when contacting support.