Uživatelská příručka k napájecímu zdroji Sharkoon Rebel P10 850W ATX 3.1

1. Úvod

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2. Bezpečnostní informace

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• Elektrické nebezpečí: Zdroj obsahuje vysokoobjemovétagkomponenty. Neotevírejte zdroj casing. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
• Profesionální instalace: Installation should be performed by a qualified technician or experienced user.
• Větrání: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• Prostředí: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• Základy: Always connect the PSU to a grounded power outlet using the provided power cable.
• Vypnout: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• Síťový napájecí kabel
• Montážní šrouby
• Uživatelská příručka (tento dokument)

4. Nastavení a instalace

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. Připravte si systém: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. Demontáž starého zdroje (pokud je k dispozici): Disconnect all cables from your old PSU and remove it from the case.
3. Montáž nového zdroje: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   Obrázek: Hlavní view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. Připojení napájení základní desky: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. Připojení napájení CPU: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. Připojení napájení PCIe: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Připojení periferního napájení: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. Správa kabelů: Organize cables neatly to ensure proper airflow and a tidy build.
9. Zavřete pouzdro a připojte napájení: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   Obrázek: Zadní view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. Návod k obsluze

Once the PSU is installed and all connections are secure:

1. Zapnutí: Přepněte vypínač na zadní straně zdroje do polohy „ON“.
2. Spuštění systému: Press the power button on your computer case to start your system.
3. Tichý provoz: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. Údržba

Regular maintenance helps ensure the longevity and optimal performance of your PSU:

• Odstranění prachu: Pravidelně čistěte prach z ventilátoru a větracích mřížek napájecího zdroje pomocí stlačeného vzduchu. Před čištěním se ujistěte, že je systém vypnutý a odpojený od sítě.
• Kontrola kabelu: Occasionally check that all power cables are securely connected and not obstructing airflow.
• Stabilní svtage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7. Řešení problémů

If you encounter issues with your PSU, consider the following:

• Bez napájení:
  • Ensure the AC power cable is securely connected to both the PSU and the wall outlet.
  • Ověřte, zda je vypínač na zadní straně zdroje napájení v poloze „ON“.
  • Check the wall outlet by plugging in another device.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• Nestabilita/pády systému:
  • Ujistěte se, že požadavky na napájení vašeho systému nepřekračují kapacitu 850 W zdroje.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• Neobvyklý hluk:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. Specifikace

9. Záruka a podpora

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webmísto.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webmísto:

www.sharkoon.com