Uživatelská příručka k stolnímu CO2 laserovému gravírovacímu a řezacímu stroji Monport Reno Pro 65W (model YX460)

1. Úvod

This manual provides essential information for the safe and efficient operation of your Monport Reno Pro 65W Desktop CO2 Laser Engraver and Cutter, Model YX460. This machine is designed for precision engraving and cutting across a wide range of materials, including wood, acrylic, and glass. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: Monport Reno Pro 65W Desktop CO2 Laser Engraver and Cutter.

2. Obsah balení

Po vybalení se prosím ujistěte, že jsou všechny níže uvedené položky přítomny a nepoškozené:

• 1x 65W CO2 Laser Engraver
• 1x Vodní čerpadlo
• 1x Exhaust Pipe (2 meters)
• 2x Pipe Clamp
• 1x USB Cable (2 meters)
• 1x Power Cord (1.5 meters)
• 1x USB Flash Drive
• 1x Focus Strip
• 1x Hexagonal T-shaped Wrench
• 1x Uživatelská příručka
• 1x ochranné brýle
• 1x Roll of Dimming Paper
• 1x Wrench Set

3. Nastavení

Proper setup is crucial for the safe and effective operation of your laser engraver. Follow these steps carefully:

1. Umístění: Place the machine on a sturdy, level surface capable of supporting its weight (88 lb. / 40 kg). Ensure adequate space around the unit for ventilation and access.
2. Ventilační systém: Connect the provided exhaust pipe to the machine's fume exhaust fan (φ120mm ventilation fan). Route the other end of the pipe to an outdoor vent or connect it to a dedicated fume extractor/air purifier. Proper ventilation is essential to remove fumes produced during operation.
3. Chladicí systém: Connect the external water pump to the machine's cooling system. Ensure the water pump is submerged in a container with at least 2 gallons of clean, cool distilled water (15-21°C). If operating in temperatures below 10°C (50℉), add antifreeze specifically designed for lasers. Verify water flow through the laser tube before operation.
4. Elektrické připojení: Connect the power cord to a standard grounded electrical outlet. Ensure the emergency stop button is released before powering on.
5. Instalace softwaru: Install the compatible software (LightBurn, Autolaser, TopwisdomLaser) on your computer. The USB flash drive included in the package may contain necessary drivers and software.
6. Počáteční kontroly: Before first use, perform a safety check by activating the emergency stop button and verifying the machine powers down. Check the air assist functionality.

4. Návod k obsluze

The Monport Reno Pro 65W is designed for user-friendly operation. Here are the basic steps:

1. Zapnutí: Ensure all connections are secure and ventilation/cooling systems are active. Turn on the main power switch and release the emergency stop button.
2. Umístění materiálu: Place your material on the workbed. The machine supports both honeycomb and blade platforms.
3. Focus Adjustment (Semi-Autofocus): Utilize the semi-autofocus feature for precise focal length adjustment. This system is designed for quick and accurate focusing, even for beginners.
4. Import/tvorba návrhu: Use the compatible software (LightBurn, Autolaser, TopwisdomLaser) to import or create your design. The software allows for precise placement and scaling of designs.
5. Úprava nastavení: Adjust laser power, speed, and other parameters based on your material type and desired outcome. The machine features an adjustable air assist system to optimize results for various materials.
6. Zahájení provozu: Initiate the engraving or cutting process from the software or directly via the control panel. The control panel with LCD display offers user-friendly navigation and control.
7. Sledování: Monitor the process. The machine's built-in cameras allow for precise design placement and real-time monitoring of the engraving/cutting process.
8. Ovládání mobilní aplikace: The Reno65 Pro supports mobile app connectivity for convenient carving operations.

5. Údržba

Regular maintenance ensures the longevity and optimal performance of your Monport Reno Pro 65W laser engraver:

• Čistota: Regularly clean the workbed, lenses, and mirrors to prevent residue buildup that can affect laser performance.
• Chladicí systém: Periodically check and replace the distilled water in the cooling system. Ensure the water pump is free from debris.
• Ventilační systém: Inspect the exhaust pipe and fan for blockages or damage. Ensure proper airflow to effectively remove fumes.
• Laserová trubice: Handle the laser tube with extreme care. Avoid touching it directly. Refer to the detailed specifications for laser tube dimensions and replacement guidelines.

6. Řešení problémů

Pokud narazíte na problémy, podívejte se na následující běžné tipy pro řešení problémů:

• Žádný laserový výstup: Check power connections, emergency stop button, water flow in the cooling system, and laser tube integrity.
• Špatná kvalita gravírování/řezání: Verify focal length adjustment, laser power and speed settings, material type, and cleanliness of lenses/mirrors.
• Fume Buildup: Ensure the exhaust system is properly connected and free of obstructions. Check for adequate room ventilation.
• Problémy s připojením softwaru: Verify USB or WiFi connection, ensure correct drivers are installed, and check software settings.

7. Specifikace

8. Záruka

The Monport Reno Pro 65W Desktop CO2 Laser Engraver comes with a 2-letá záruka on the main unit and a Záruka 6 měsíců on parts. Please retain your proof of purchase for warranty claims.

9. Podpora

For technical assistance, troubleshooting, or further inquiries, please visit the official Monport Store or contact customer support.

Monport Store: Visit the Monport Store