1. Úvod
The Vertiv Liebert GXE UPS is an in-line dual conversion single-phase inverter designed to provide robust power protection for critical IT equipment. This system ensures continuous and reliable power, safeguarding connected devices from various AC sector disruptions through its advanced inline double conversion technology. Its flexible design allows for both rack-mount and tower configurations, making it suitable for diverse application environments.
2. Bezpečnostní informace
Před instalací, provozem nebo údržbou UPS si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.
- Elektrická bezpečnost: The UPS contains hazardous voltagNeotevírejte kryt UPS. Servis by měl provádět pouze kvalifikovaný personál.
- Základy: Always connect the UPS to a grounded power outlet. Ensure proper grounding to prevent electric shock.
- Bezpečnost baterie: Batteries can present a risk of electrical shock and high short-circuit current. Do not dispose of batteries in a fire. Batteries may explode.
- Větrání: Ensure adequate airflow around the UPS. Do not block ventilation openings. Maintain a minimum clearance of 20 cm (8 inches) from any obstruction.
- Prostředí: Operate the UPS in a clean, dry, and temperature-controlled environment. Avoid direct sunlight, excessive heat, humidity, or corrosive contaminants.
3. Konec produktuview
3.1 Klíčové vlastnosti
- High Output Power Factor (0.9) for efficient power delivery.
- High efficiency in online mode (up to 91%) and ECO mode (up to 96%).
- Compact design, convertible for flexible rack/tower deployment.
- User-friendly LCD interface for easy monitoring and control.
- Fast battery recharge time (< 4 hours at 90% for internal batteries).
- Extended battery life with support for up to 4 optional external battery cabinets (EBC).
- UPS internal hot-swappable batteries for easy maintenance.
- Includes Free Vertiv Power Assist software for local UPS status and shutdown.
- Compatible with Vertiv Power Insight for remote network management.
- Remote management capability with optional Vertiv Liebert Intellislot IS-UNITY Network Management Cards.
3.2 Visual Guide
4. Nastavení
4.1 Vybalení a kontrola
Carefully unpack the UPS and its accessories. Inspect for any shipping damage. Retain the packaging for future use or return.
4.2 Umístění
Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and excessive dust or moisture. Ensure sufficient clearance around the unit for proper airflow.
4.3 Configuration (Tower/Rack-Mount)
The GXE3-1000IRT2UXL can be deployed as a tower unit using the included stands or installed in a standard 19-inch rack using an optional rack-mount kit (sold separately). Follow the instructions provided with the rack-mount kit for rack installation.
4.4 Elektrické připojení
- Vstupní výkon: Connect the UPS input power cord to a grounded electrical outlet. Ensure the outlet provides the correct voltage (230 V) a proudová kapacita.
- Výstupní zařízení: Connect your critical IT equipment (servers, networking devices, etc.) to the IEC C13 output receptacles on the rear of the UPS. Do not overload the UPS beyond its rated capacity (900W).
- Komunikační porty: For monitoring and management, connect the appropriate communication cables (USB, RS-232, or optional network card) to your computer or network.
4.5 Počáteční zapnutí
After all connections are secure, press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will perform a self-test. Allow the batteries to charge for at least 4 hours before connecting critical loads for optimal runtime.
5. Obsluha UPS
5.1 LCD displej a ovládání
The user-friendly LCD display provides real-time status information, including input/output voltage, load level, battery capacity, and operational mode. Use the navigation buttons next to the LCD to scroll through menus and configure settings.
5.2 Provozní režimy
- Online Mode (Double Conversion): The UPS continuously converts incoming AC power to DC to charge the batteries, and then converts DC back to clean AC power for connected devices. This provides the highest level of power protection.
- ECO Mode (Economy Mode): In ECO mode, the UPS operates with higher efficiency by bypassing the double conversion process when utility power is stable. It switches to online mode instantly upon detecting power anomalies.
5.3 Správa softwaru
For enhanced monitoring and management, install the Vertiv Power Assist software on a connected computer for local control and graceful shutdown. For network-wide management, utilize Vertiv Power Insight or an optional Vertiv Liebert Intellislot IS-UNITY Network Management Card.
6. Údržba
6.1 Výměna baterie
The Vertiv Liebert GXE3-1000IRT2UXL features hot-swappable internal batteries, allowing for replacement without powering down connected equipment. Refer to the detailed battery replacement guide available on the Vertiv support website for specific instructions. Always use genuine Vertiv replacement batteries.
6.2 Čištění
Periodically clean the exterior of the UPS with a soft, dry cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow and prevent overheating.
6.3 Pravidelné kontroly
Regularly check the UPS status via the LCD display or management software. Verify that input and output connections are secure and that the UPS is operating in the desired mode.
7. Řešení problémů
This section provides solutions to common issues you may encounter with your UPS. For more complex problems, contact Vertiv technical support.
| Problém | Možná příčina | Řešení |
|---|---|---|
| UPS se nezapne. | No input power; UPS circuit breaker tripped; Battery deeply discharged. | Check power cord connection and wall outlet. Reset the circuit breaker. Allow UPS to charge for several hours. |
| UPS nepřetržitě pípá. | Overload condition; Low battery. | Snižte připojené zatížení. Nechte baterie dobít. |
| UPS se často přepíná do režimu baterie. | Unstable utility power; Sensitivity setting too high. | Check utility power quality. Adjust UPS input sensitivity via LCD or software. |
8. Specifikace
| Atribut | Hodnota |
|---|---|
| Číslo modelu | GXE3-1000IRT2UXL |
| Kapacita (VA/W) | 1000 VA / 900 XNUMX W |
| Vstupní objemtage | 230V |
| Výstupní účiník | 0.9 |
| Form Factor | 2U Tower / Rack-Mount Convertible |
| Výstupní zásuvky | 8 x IEC60320 C13 |
| Technologie | Dual Conversion Online |
| Efektivita (online režim) | až 91 % |
| Efficiency (ECO Mode) | až 96 % |
| Doba nabíjení | < 4 hours to 90% (internal batteries) |
| Rozměry (balení) | 17.24 x 16.93 x 3.39 palce |
| Hmotnost položky | 35.2 libry |
| ASIN | B0DX6YTYFZ |
| UPC | 767041034967, 767041034394 |
9. Záruka a podpora
The Vertiv Liebert GXE3-1000IRT2UXL UPS comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Vertiv webpodrobné záruční podmínky naleznete na webu.
Technická podpora
For technical assistance, troubleshooting, or service inquiries, please contact Vertiv customer support. Contact information and support resources can be found on the official Vertiv webmísto: www.vertiv.com/en-us/support/
