Zavedení
This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME EAB01 3D Puzzle Gift Factory Wooden Model. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience. This model is designed to be a dynamic and interactive display piece, featuring a gift production line, LED lighting, and music.
Bezpečnostní informace: Not suitable for children under 14 years due to small parts and complex assembly. Adult supervision is recommended for younger builders within the recommended age range.
Co je v krabici
Your ROBOTIME EAB01 kit includes all necessary components for assembly. Please verify all parts are present before starting.
- Pre-cut wooden sheets with puzzle pieces
- Electronic components (LED lights, music module)
- Návod k montáži
- Small accessories (e.g., screws, wires, plastic parts)
Obrázek: Overview of the kit contents, including wooden sheets and the instruction manual.
Nastavení a montáž
The ROBOTIME EAB01 model is designed for advanced assembly, requiring approximately 12 hours to complete. No glue is needed as pieces fit together using wooden tenon and mortise joints.
Příprava
- Rozbalte komponenty: Carefully remove all wooden sheets and other components from the packaging.
- Uspořádejte díly: Identify and organize pieces by their corresponding sheet numbers or labels as indicated in the assembly manual.
- Review Instrukce: Thoroughly read the entire assembly instruction manual provided in the kit before starting. Pay close attention to diagrams and step-by-step guidance.
- Připravte pracovní prostor: Ensure you have a clean, well-lit, and spacious work area to prevent loss of small parts.
Montážní kroky
Follow the illustrated assembly instructions provided with your kit. The process involves interlocking wooden pieces to form the structure, followed by the integration of electronic components for lighting and music.
- Postupná konstrukce: Assemble the model section by section, ensuring each joint is secure. Refer to the manual for the correct sequence.
- Electronic Integration: Install the LED lights and music module as directed. Ensure all connections are firm.
- Testování: Periodically test the electronic functions during assembly if possible, especially before sealing sections that might make access difficult later.
Obrázek: Podrobný view of the "Raw Stock" material processing and "Assembly Line" sections of the Gift Factory model.
Obrázek: Podrobný view of the "Packaging and Sealing" and "Bow Tying" sections of the Gift Factory model's production line.
Image: The kit components spread out, demonstrating the wooden mortise joint design that requires no glue for assembly.
Návod k obsluze
Once fully assembled, your ROBOTIME EAB01 Gift Factory model can be operated to showcase its dynamic features.
Zapnutí
Locate the power switch, typically found at the base or rear of the model. Flip the switch to the 'ON' position to activate the LED lights and music function.
Image: The assembled Gift Factory model with its lights on and music playing, illustrating its full operational state.
Dynamic Production Line
The model features a simulated gift production line. Observe the movement of the elves and gifts through the various stages: material processing, assembly line, packaging and sealing, and bow tying.
- Material Processing: Gifts begin their journey in the "Raw Stock" area.
- Assembly Line: Gifts move along the conveyor system.
- Packaging and Sealing: Gifts are prepared for shipment.
- Bow Tying: The final touch is added to the gifts.
Image: A visual breakdown of the four key stages of the Gift Factory's production process.
Údržba
Proper care will ensure the longevity and continued enjoyment of your ROBOTIME EAB01 model.
- Čištění: Use a soft, dry cloth to gently wipe dust from the model. Avoid using water or chemical cleaners, as they may damage the wood or electronic components.
- Skladování: Store the model in a dry environment, away from direct sunlight and extreme temperatures, to prevent warping or fading of the wood.
- Zacházení: Handle the model with care, especially when moving it, to avoid dislodging or damaging delicate parts.
- Výměna baterie: If your model uses batteries for the lights and music, replace them as needed following the instructions in the original assembly manual. Ensure correct polarity.
Odstraňování problémů
If you encounter any issues with your ROBOTIME EAB01 model, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Lights or Music Not Working |
|
|
| Moving Parts Are Stuck |
|
|
| Chybějící nebo poškozené díly | Manufacturing defect or accidental damage during assembly. | Contact ROBOTIME customer service for assistance. They offer service for lost or damaged parts. |
Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | ROBOTIME EAB01 Gift Factory |
| Číslo modelu | EAB01ROBOTIME |
| Materiál | Vysoce kvalitní překližka |
| Počet kusů | 449 kusy |
| Přibližná doba montáže | 12 hodin |
| Rozměry ve složeném stavu (D x Š x V) | 24.5 x 16.5 x 25.7 cm (9.65 x 6.5 x 10.12 palce) |
| Vlastnosti | Dynamic production line, LED lighting, Music function, 5 gift elves |
| Doporučený věk | 14 let a více |
| Způsob montáže | Wooden tenon and mortise assembly (no glue required) |
Image: Diagram illustrating the assembled dimensions of the Gift Factory model.
Záruka a podpora
ROBOTIME offers support for lost or damaged parts. For assistance, please contact ROBOTIME customer service directly.
For further information or support, you may visit the official ROBOTIME store on Amazon: ROBOTIME Store.
You can also scan the QR code on the product packaging for more information or support. An example link from the packaging is: ROBOTIME Support Link.
The UPC for this product is 6946785123371.
