1. Úvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Empura E-UCF120 17" Wide Air Cooled Undercounter Ice Maker. Designed for commercial use in restaurants, bars, cafes, and pubs, this machine produces full cube ice with a capacity of up to 120 lbs per 24 hours and features a 48 lbs integrated storage bin.
VAROVÁNÍ: Tento produkt vás může vystavit chemikáliím včetně olova, o kterém je ve státě Kalifornie známo, že způsobuje rakovinu a vrozené vady nebo jiné reprodukční poškození. Pro více informací přejděte na www.P65Warnings.ca.gov.
Obrázek 1.1: Přední strana view of the Empura E-UCF120 Undercounter Ice Maker. This image shows the compact stainless steel design with the control panel visible.
2. Co je v krabici
Po vybalení se prosím ujistěte, že jsou všechny níže uvedené komponenty přítomny a nepoškozené:
- Stroj na výrobu ledu
- Nastavitelné nožičky
- 3/4" Water Inlet connection
- Napájecí kabel
- R290 refrigerant (pre-charged)
Obrázek 2.1: Úhlové view of the Empura E-UCF120, highlighting its compact form factor suitable for undercounter placement.
3. Nastavení a instalace
3.1 Umístění
- Place the ice maker on a level, stable surface capable of supporting its weight when full of ice and water.
- Ensure adequate ventilation around the unit. Maintain at least 6 inches of clearance from walls or other obstructions on all sides (especially the back and sides where air vents are located) to allow for proper airflow for the air-cooled system.
- Avoid direct sunlight or proximity to heat-generating appliances. The optimal ambient temperature for operation is between 40°F and 100°F.
- Adjust the included feet to level the unit and ensure stability.
Obrázek 3.1: Zadní strana view of the Empura E-UCF120, showing the power cord and water inlet connection point.
3.2 Elektrické připojení
- The unit requires a dedicated 115V, 60Hz, single-phase electrical supply.
- Ensure the electrical outlet is properly grounded and matches the NEMA 5-15P plug type.
- Nepoužívejte prodlužovací kabely nebo adaptéry.
3.3 Připojení vody
- Connect the ice maker to a potable water supply using a 3/4" water inlet line.
- An inline water filter is recommended to ensure optimal ice quality and prolong the life of the machine.
- Ensure all water connections are secure and leak-free before operating the unit.
4. Návod k obsluze
4.1 Počáteční spuštění
- After installation, allow the unit to stand upright for at least 4 hours before plugging it in to allow the refrigerant to settle.
- Plug the ice maker into the dedicated electrical outlet.
- Zapněte přívod vody do jednotky.
- Press the power button on the control panel to start the ice production cycle.
4.2 Produkce ledu
The Empura E-UCF120 is designed to produce full cube ice. The machine will automatically cycle through water filling, freezing, and harvesting processes. Ice will drop into the integrated 48 lbs storage bin. The unit will pause ice production when the bin is full and resume when ice is removed.
- The control panel will display operational status and may indicate error codes if issues arise. Refer to the troubleshooting section for common codes.
- The first few batches of ice may be smaller or irregular. Discard these initial batches to ensure cleanliness.
Image 4.1: Icons representing the highly efficient operation and large capacity of the ice maker.
5. Údržba a čištění
Regular maintenance is crucial for the longevity and efficient operation of your ice maker. Always unplug the unit and turn off the water supply before performing any cleaning or maintenance.
5.1 Čištění exteriéru
Wipe down the stainless steel exterior with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads that can scratch the surface.
5.2 Interior and Ice Bin Cleaning
- Regularly clean the ice storage bin with a solution of mild soap and warm water. Rinse thoroughly.
- For deeper cleaning, use a food-grade sanitizer. Follow the sanitizer manufacturer's instructions for dilution and contact time.
- Ensure all surfaces are dry before resuming operation.
5.3 Descaling (Mineral Removal)
Mineral deposits from water can build up on internal components, affecting ice production. Descaling should be performed periodically, depending on water hardness, typically every 3-6 months.
- Empty the ice bin and turn off the unit.
- Prepare a descaling solution according to the descaler product instructions (e.g., citric acid-based ice machine cleaner).
- Follow the specific cleaning cycle instructions for your model, which usually involves circulating the descaling solution through the system.
- After descaling, run several rinse cycles with fresh water to remove all traces of the cleaning solution.
Image 5.1: Icons highlighting the durable stainless steel construction and compliance with NSF safety standards.
6. Řešení problémů
Before contacting service, please review následující běžné problémy a jejich možná řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádná tvorba ledu | Žádné napájení; Přerušený přívod vody; Ucpaný vodní filtr; Vysoká okolní teplota. | Check power connection; Ensure water supply is on; Replace water filter; Ensure proper ventilation and room temperature. |
| Ice production is slow or ice is thin | Low water pressure; Dirty condenser coils; Mineral buildup on evaporator. | Check water pressure; Clean condenser coils; Perform descaling procedure. |
| Neobvyklý hluk | Uvolněné součásti; Ucpání ventilátoru; Problém s kompresorem. | Check for loose parts; Clear any obstructions from fan; Contact qualified technician if compressor noise persists. |
| Úniky vody | Loose water connections; Clogged drain line. | Tighten water connections; Clear drain line. |
7. Specifikace
Detailed technical specifications for the Empura E-UCF120 Undercounter Ice Maker:
| Funkce | Detail |
|---|---|
| Číslo modelu | E-UCF120 |
| Typ stroje | Podpultový |
| Chladivo | R290 |
| Rozměry výrobku (Š x H x V) | 17 cm Š x 24 cm H x 35.56 cm V |
| Kapacita zásobníku | 48 libry |
| 24 Hour Ice Yield | 120 liber |
| svtage | 115 voltů |
| Typ zástrčky | NEMA 5-15P |
| Ice Cube Type | Plná krychle |
| Výrobce | Empura |
Image 7.1: Visual representation of the Empura E-UCF120 specifications, including dimensions and certifications.
8. Záruka a podpora
For warranty information, technical support, or service inquiries, please contact Empura customer service directly. Retain your proof of purchase for warranty claims.
Visit the official Empura website or refer to the documentation provided with your purchase for specific contact details and warranty terms.
You can find more information about Empura products at: Obchod Empura na Amazonu
