1. Konec produktuview
The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.
This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.
Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.
2. Fitment Information
These running boards are specifically designed for:
- Vozidlo: 2024-2026 Toyota Tacoma
- Typ kabiny: Double Cab (4 full-size doors)
- Kompatibilita: Includes Hybrid models
Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.
Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.
3. Nastavení a instalace
3.1. Zahrnuté komponenty
Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty:
- Stupátko na straně řidiče
- Podběhová deska na straně spolujezdce
- All necessary hardware and mounting brackets
- Instalační příručka (tento dokument)
3.2. Kroky instalace
Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.
- Připravte vozidlo: Zaparkujte vozidlo na rovném povrchu a zatáhněte parkovací brzdu.
- Určete montážní body: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
- Připevněte držáky: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
- Position Running Board: Carefully lift and align the running board with the attached brackets.
- Secure Running Board: Attach the running board to the brackets using the remaining hardware.
- Seřízení a utažení: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
- Opakujte pro druhou stranu: Follow the same steps for the opposite side of the vehicle.
Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.
4. Návod k obsluze
The Tyger Access Running Boards are designed for straightforward use. To operate:
- Ensure the running boards are securely installed before use.
- When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
- The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.
Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.
5. Údržba
To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:
- Pravidelný úklid: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
- Inspekce: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
- Ochrana povrchové úpravy: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.
Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.
6. Řešení problémů
If you encounter any issues with your running boards, consider the following:
- Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
- Neobvyklé zvuky: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
- Obtížnost instalace: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).
V případě přetrvávajících problémů, které tyto kroky nevyřeší, kontaktujte zákaznickou podporu.
7. Specifikace
| Číslo modelu | TG-AS2T24003 |
| Značka | Tyger Auto |
| Materiál | Uhlíková ocel |
| Vnější povrch | Textured Black Powder E-Coating |
| Rozměry položky (D x Š x V) | 76.69 x 7.24 x 5.59 palce |
| Hmotnost položky | 39.2 libry |
| Hmotnostní kapacita | 500 libry |
| Ground Clearance (approx.) | 15 palců |
| UPC | 810171270504 |
Image 7.1: Detailed dimensions of the Tyger Access Running Board.
Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.
8. Informace o záruce
Tyger Auto provides a 5-letá záruka for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.
9. Podpora
For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto webwebu nebo kontaktujte jejich zákaznický servis prostřednictvím prodejce, u kterého jste produkt zakoupili.
Více informací a kontaktní údaje naleznete na Tyger Auto Store on Amazon.
