1. Konec produktuview
This manual provides instructions for the Fanttik F2 Master Mini Cordless Rotary Tool Kit and the Fanttik D2 PLUS Laser Level. These tools are designed for precision tasks and accurate leveling applications.
Image 1.1: The Fanttik F2 Master Mini Cordless Rotary Tool (left) and D2 PLUS Laser Level (right).
1.1 F2 Master Mini Cordless Rotary Tool
The F2 Master is a compact, cordless rotary tool featuring a brushless hollow cup motor for reduced noise and enhanced performance. It offers 5 adjustable speed settings for various precision tasks such as grinding, polishing, drilling, and engraving. The tool includes a Revostor Hub for organized accessory storage and a durable aluminum case with a pop-up mechanism for easy access.
1.2 D2 PLUS Laser Level
The D2 PLUS is a high-precision laser level utilizing advanced high-brightness green laser technology. It provides a projection range of up to 100 ft with an accuracy of 3/32 inches at 30 ft. It features independent or combined vertical and horizontal line projection, a wide-angle expansion for vertical lines, and a pulse mode for extended working range with an optional receiver.
2. Bezpečnostní informace
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění a poškození produktu.
- Před použitím si přečtěte všechny pokyny.
- Wear appropriate personal protective equipment, such as safety glasses, when operating the rotary tool.
- Udržujte pracovní prostor čistý a dobře osvětlený.
- Nepracujte s elektrickým nářadím ve výbušném prostředí, například v přítomnosti hořlavých kapalin, plynů nebo prachu.
- Při práci s elektrickým nářadím držte děti a přihlížející mimo dosah.
- Nářadí skladujte mimo dosah dětí.
2.1 Bezpečnost laseru
The D2 PLUS Laser Level is a Class II laser product. Observe the following precautions:
- POZOR: Nedívejte se přímo do laserového paprsku.
- Nesměrujte laserový paprsek úmyslně na lidi ani zvířata.
- Avoid exposing the eyes to direct or reflected laser beams.
- Neupravujte laserové zařízení.
- Používejte pouze tak, jak je popsáno v tomto návodu.
3. Obsah balení
Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:
Image 3.1: Contents of the D2 PLUS Laser Level package.
- Laserová vodováha D2 PLUS
- USB-C kabel
- Magnetický držák
- Terčová deska
- Taška se stahovací šňůrkou
- Uživatelská příručka
- F2 Master Mini Cordless Rotary Tool
- F2 Master Revostor Hub with 35 accessories (3/32" / 2.3mm)
- F2-M2 Magnetic Wrench
4. F2 Master Rotary Tool - Setup & Operation
4.1 Komponenty nadview
- Rotary Tool Body: Main unit with motor and battery.
- Kleština: Holds the accessory bits.
- Speed Indicator Lights: Display current speed setting.
- Tlačítko napájení/rychlosti: Řídí výkon a rychlost.
- Centrum Revostor: Magnetic stand for organizing accessories.
- Aluminum Case: Protective case with pop-up mechanism.
4.2 Charging the Rotary Tool
The F2 Master is battery-powered. Ensure it is fully charged before first use.
- Connect the USB-C charging cable to the charging port on the rotary tool.
- Druhý konec kabelu připojte k vhodnému USB napájecímu adaptéru (není součástí balení).
- The indicator lights will show charging status. Once fully charged, disconnect the cable.
4.3 Připevnění příslušenství
The Revostor Hub provides organized storage and easy access to various accessories.
Image 4.1: The Revostor Hub for organized accessory storage.
- Ensure the rotary tool is turned off.
- Odšroubujte matici kleštiny.
- Insert the desired accessory bit (3/32" / 2.3mm shank) into the collet.
- Tighten the collet nut securely using the F2-M2 Magnetic Wrench to hold the bit in place. Do not overtighten.
4.4 Zapnutí/vypnutí a nastavení rychlosti
The F2 Master features a brushless motor for efficient and quiet operation.
Image 4.2: The F2 Master operates quietly at 32 dB when idle.
Image 4.3: The F2 Master's powerful brushless motor provides up to 25,000 RPM.
- Zapnutí: Press and hold the Power/Speed button until the indicator lights illuminate. The tool will start at the lowest speed setting.
- Nastavení rychlosti: Briefly press the Power/Speed button to cycle through the 5 available speed settings. The indicator lights will show the selected speed.
- Vypnutí: Press and hold the Power/Speed button until the indicator lights turn off.
5. D2 PLUS Laser Level - Setup & Operation
5.1 Komponenty nadview
- Laser Emitters: Project horizontal and vertical green laser lines.
- Ovládací panel: Buttons for power, mode selection, and pulse mode.
- Zámek kyvadla: Zajišťuje kyvadlo pro ruční režim nebo přepravu.
- Indikátor baterie: Zobrazuje zbývající životnost baterie.
- Nabíjecí port USB-C: Pro dobíjení interní baterie.
5.2 Charging the Laser Level
The D2 PLUS has a 2600 mAh rechargeable battery, providing 7-14 hours of continuous use.
Image 5.1: The D2 PLUS Laser Level features a USB-C charging port.
- Connect the provided USB-C charging cable to the charging port on the side of the laser level.
- Druhý konec kabelu připojte k vhodnému USB napájecímu adaptéru (není součástí balení).
- The battery indicator lights will show charging status. Disconnect once fully charged.
5.3 Zapnutí/vypnutí a výběr režimu
The D2 PLUS uses an OSRAM green laser, which is four times brighter than traditional red lasers.
Image 5.2: The D2 PLUS utilizes a bright OSRAM green laser.
Image 5.3: The D2 PLUS offers three distinct line modes.
Image 5.4: Manual Mode (left) and Self-Leveling Mode (right) applications.
- Samonivelační režim: Unlock the pendulum by sliding the pendulum lock switch to the 'unlocked' position. Press the power button to turn on the laser. The laser will self-level within 4 degrees. If the tilt exceeds 4 degrees, the laser will flash rapidly to indicate it is out of level. Press the power button to cycle through horizontal line, vertical line, or both.
- Manuální režim: Lock the pendulum by sliding the pendulum lock switch to the 'locked' position. Press and hold the power button for 3 seconds to turn on the laser. The laser lines can now be projected at any angle without self-leveling. Press the power button to cycle through horizontal line, vertical line, or both.
- Pulzní režim: In self-leveling mode, briefly press the pulse mode button (often indicated by a 'P' or wave icon) to activate pulse mode. This mode extends the working range up to 200 ft when used with a compatible laser receiver (not included), especially useful in bright environments.
Image 5.5: Pulse Mode extends the working range of the D2 PLUS Laser Level.
5.4 Montáž laserového nivelačního přístroje
The D2 PLUS can be mounted using its integrated magnetic bracket or a tripod.
Image 5.6: The D2 PLUS offers high precision, up to ±3/32 in at 30 ft.
- Magnetický držák: Attach the magnetic bracket to metallic surfaces for stable positioning.
- Montáž na stativ: The laser level has a standard tripod thread (1/4"-20) on its base for mounting to a tripod (not included).
6. Údržba
Proper maintenance ensures the longevity and optimal performance of your tools.
Image 6.1: The D2 PLUS Laser Level is designed for durability against dust, water, and minor impacts.
- Čištění: Použijte měkký, damp cloth to clean the tool surfaces. Do not use abrasive cleaners or solvents. For the laser level, gently wipe the laser windows with a clean, lint-free cloth.
- Skladování: Store both tools in their original packaging or a protective case in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the pendulum lock on the laser level is engaged during storage and transport.
- Péče o baterie: For optimal battery life, charge the tools regularly, even if not in frequent use. Avoid fully discharging the batteries for extended periods.
- Inspekce: Periodically inspect the tools for any signs of damage, loose parts, or wear. Do not operate damaged tools.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v tabulce níže.
| Problém | Možná příčina | Řešení |
|---|---|---|
| F2 Master does not turn on. | Slabá baterie. | Charge the rotary tool using the USB-C cable. |
| F2 Master accessory bit is loose. | Matice kleštiny není dostatečně utažená. | Ensure the collet nut is securely tightened with the magnetic wrench. |
| D2 PLUS laser lines are flashing rapidly. | Laser level is out of its self-leveling range (>4 degrees). | Place the laser level on a flatter surface or adjust its position until the flashing stops. |
| D2 PLUS laser lines are dim or not visible outdoors. | Jasné ambientní světlo. | Activate Pulse Mode and use a compatible laser receiver (not included). |
| D2 PLUS laser lines are not self-leveling. | Pendulum lock is engaged (Manual Mode). | Slide the pendulum lock switch to the 'unlocked' position for Self-Leveling Mode. |
If you encounter issues not covered here, please contact Fanttik customer support.
8. Specifikace
8.1 Fanttik F2 Master Mini Cordless Rotary Tool
| Funkce | Specifikace |
|---|---|
| Typ motoru | Brushless Hollow Cup Motor |
| Maximální rychlost otáčení | 25,000 ot./min |
| Nastavení rychlosti | 5 nastavitelných nastavení |
| Noise Level (Idle) | 32 dB |
| Hmotnost | 0.22 lb |
| Accessory Shank Size | 3/32" / 2.3mm |
| Zdroj napájení | Napájení z baterie |
| Speciální funkce | Portable, Cordless, Revostor Hub, Aluminum Case |
8.2 Fanttik D2 PLUS Laser Level
| Funkce | Specifikace |
|---|---|
| Typ laseru | Green Laser (OSRAM) |
| Klasifikace laseru | Class II, <1 mW |
| Rozsah projekce | Až 100 stop |
| Přesnost | ±3/32 palce při 30 stopách |
| Samonivelační rozsah | ±4 stupňů |
| Vertical Line Angle | 130° |
| Kapacita baterie | 2600 XNUMX mAh |
| Doba nepřetržitého používání | 7-14 hodin |
| Nabíjecí port | USB-C |
| Trvanlivost | Dust Resistance, Water Resistance, Resistant to fall from 1m |
9. Záruka a podpora
Fanttik products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included in your package or visit the official Fanttik webwebu. Při kontaktování podpory si prosím připravte číslo modelu a datum zakoupení.
For further assistance, you may contact Fanttik customer service through their official channels.
