1. Úvod
This user manual provides essential information for the safe and efficient use of your Dyness 12V 100Ah LiFePO4 Lithium Battery. This battery is designed for various applications including RVs, camping, solar systems, off-grid living, home energy storage, and boating. It features A+ grade cells, a built-in 100A Battery Management System (BMS), and low-temperature charging protection, offering a long lifespan and reliable performance.
Figure 1: Dyness 12V 100Ah LiFePO4 Lithium Battery. This image shows the overall appearance of the battery unit.
2. Bezpečnostní informace
Always read and understand all safety instructions before installing or operating the battery. Failure to follow these instructions may result in serious injury, property damage, or voiding of the warranty.
Obecná bezpečnostní opatření:
- Baterii nerozebírejte, neupravujte ani nepropichujte.
- Uchovávejte baterii mimo dosah ohně, zdrojů tepla a přímého slunečního záření.
- Neponořujte baterii do vody nebo jiných kapalin.
- Use only compatible chargers specifically designed for LiFePO4 batteries.
- Během nabíjení a vybíjení zajistěte dostatečné větrání.
- Při manipulaci s baterií používejte vhodné osobní ochranné prostředky (OOP), jako jsou rukavice a ochrana očí.
- Vyhněte se zkratování vývodů baterie.
- Uchovávejte mimo dosah dětí.
Nízkoteplotní ochrana:
The Dyness LiFePO4 battery includes a low-temperature charging protection feature. Charging will automatically disconnect when the battery's temperature drops below 32°F (0°C) and will resume at 41°F (5°C). Discharging will automatically cut off power at -4°F (-20°C) to protect the battery from damage.
Figure 2: Illustration of Low Temperature Cut-Off Protection. This image visually explains the temperature thresholds for charging and discharging protection.
3. Konec produktuview
The Dyness 12V 100Ah LiFePO4 battery is engineered for superior performance and longevity. Key features include:
- Kompaktní a lehký: Significantly smaller and lighter than traditional lead-acid batteries, weighing only 25.3 lbs.
- Premium A+ Grade Cells: Ensures exceptional longevity and higher power density.
- Vestavěný 100A BMS: Provides comprehensive protection and enhances reliability.
- Dlouhá životnost: Offers 4000+ deep cycles, lasting up to 6 times longer than standard lead-acid batteries.
- Všestranné aplikace: Ideal for RVs, solar systems, off-grid setups, and marine use.
Components and Dimensions:
Figure 3: Dimensions of the Dyness 12V 100Ah LiFePO4 Battery (Group 31). The battery measures 13.0 inches (L) x 6.77 inches (W) x 8.43 inches (H) and weighs 25.3 lbs.
Figure 4: Illustration of the 100A Battery Management System (BMS). The BMS provides protection against overcharge, over-discharge, over-current, short circuit, high temperature, moisture, dust, and salt spray.
Figure 5: Depiction of High-Performance A+ Grade Cells. These cells contribute to the battery's long lifespan of up to 4000+ deep cycles.
4. Nastavení
Instalační prostředí:
- Install the battery in a dry, well-ventilated area, away from direct sunlight and heat sources.
- Ensure the installation surface is stable and can support the battery's weight.
Connecting Batteries (Series and Parallel):
The Dyness 12V 100Ah LiFePO4 battery can be connected in series (up to 4 batteries for 48V systems) and in parallel (up to 4 batteries for increased capacity) to meet various energy requirements. Always ensure all batteries are of the same type, capacity, and state of charge before connecting them.
- Paralelní připojení: Connect positive terminals to positive terminals and negative terminals to negative terminals. This increases the total capacity (Ah) while maintaining the voltage (12 V).
- Sériové připojení: Připojte kladný pól jedné baterie k zápornému pólu další. Tím se zvýší celkový objem.tage (V) while maintaining the capacity (Ah).
Obrázek 6: Přamples of battery configurations. The battery can be connected in various configurations to achieve desired energy banks, such as 1P1S (1.28kWh), 2P2S (5.12kWh), and 4P4S (20.48kWh).
Připojení terminálu:
The battery uses M8 terminals. Ensure all connections are secure and properly torqued to prevent loose connections and potential arcing.
5. Návod k obsluze
Nabíjení:
For optimal battery health and fastest/safest charging, it is highly recommended to use a LiFePO4-specific charger. Recharging at a 0.2C rate (20A for a 100Ah battery) is recommended for optimal battery longevity.
- Connect the charger's positive lead to the battery's positive terminal and the negative lead to the battery's negative terminal.
- Ensure the charger settings are appropriate for a 12.8V LiFePO4 battery.
- Monitor the charging process, especially for the first few charges.
Vybíjení:
The battery's built-in BMS protects against over-discharging. However, it is good practice to avoid consistently discharging the battery to its absolute minimum to maximize its lifespan.
- Connect your load to the battery terminals, ensuring correct polarity.
- Do not exceed the maximum continuous discharge current specified in the specifications.
6. Údržba
Pravidelné kontroly:
- Periodically inspect the battery terminals for corrosion or loose connections. Clean as necessary.
- Ensure the battery is kept clean and free of dust and debris.
- Zkontrolujte baterii c.asing for any signs of damage or swelling. If damage is observed, discontinue use and contact support.
Skladování:
- If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC).
- Baterii skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
- Při dlouhodobém skladování baterii dobíjejte každé 3–6 měsíců, abyste zabránili jejímu hlubokému vybití.
7. Řešení problémů
The built-in 100A BMS provides extensive protection, which may cause the battery to shut down under certain conditions. Refer to the table below for common issues and their solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Baterie se nenabíjí | Over-discharge protection activated, low-temperature charging protection, charger issue, loose connection. | Check battery temperature (must be above 0°C/32°F). Verify charger functionality and connections. If deeply discharged, a specialized charger might be needed to reactivate. |
| Battery not discharging (no power output) | Over-discharge protection, over-current protection, short circuit protection, low-temperature discharging protection. | Reduce load. Check for short circuits in the system. Ensure battery temperature is above -20°C/-4°F. Disconnect load for a few minutes to allow BMS to reset. |
| Přehřátí baterie | Excessive load, poor ventilation, high ambient temperature. | Reduce load. Ensure adequate ventilation around the battery. Move battery to a cooler environment if possible. The BMS will activate over-temperature protection. |
| Unusual odors or swelling | Internal cell damage. | Immediately disconnect the battery from all loads and chargers. Do not attempt to use or repair. Contact Dyness customer support immediately. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Dyness customer support for assistance.
8. Specifikace
| Atribut | Hodnota |
|---|---|
| Značka | Dyness |
| Model | AR1.2 (12V 100Ah Group 31) |
| Typ baterie | LiFePO4 (lithium-železo fosfát) |
| Jmenovitý svtage | 12.8V |
| Nominální kapacita | 100Ah |
| Energie | 1280 Wh |
| Vestavěný BMS | 100A |
| Životnost | Více než 15 000 hlubokých cyklů |
| Low-Temp Charging Protection | Charging off below 0°C (32°F), resumes at 5°C (41°F) |
| Low-Temp Discharging Protection | Discharging off below -20°C (-4°F) |
| Rozměry (D x Š x V) | 13.0 x 6.77 x 8.43 palce (33.02 x 17.20 x 21.41 cm) |
| Hmotnost | 25.3 libry (11.48 kg) |
| Typ terminálu | Terminál M8 |
| Certifikace | UL, FCC, CE, RoHS, UN38.3 (as per product description) |
9. Záruka a podpora
Dyness is committed to providing high-quality products and excellent customer service. Your 12V 100Ah LiFePO4 battery is designed for a long lifespan, typically exceeding 10 years under proper use.
Zákaznická podpora:
For any product-related issues, questions, or technical support, please do not hesitate to contact the Dyness support team. They provide professional technical support and online customer service with a fast response within 24 hours.
Please refer to the contact information provided with your purchase or visit the official Dyness webweb s nejaktuálnějšími kanály podpory.
Figure 7: Dyness customer service representatives ready to assist. The company offers responsive after-sales support.
