1. Úvod
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your SEAFLO 23A Series Automatic Demand Diaphragm Pump. The 23A Series is designed for liquid transfer, pressurization, and circulation in various applications. It features a compact design with a flow rate up to 1.5 GPM (5.6 LPM) and pressure up to 120 PSI (8.2 Bar). Please read this manual thoroughly before installation and use.
2. Bezpečnostní informace
Observe all safety precautions to prevent injury or damage. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Před prováděním servisu čerpadla vždy odpojte napájení.
- Zajistěte správné elektrické uzemnění.
- Do not pump flammable liquids. This pump is designed for water and compatible non-flammable liquids.
- Chraňte čerpadlo před mrazem.
- Ujistěte se, že všechny spoje jsou bezpečné a bez úniku.
- Do not operate the pump dry for extended periods, although it has dry run capability.
3. Konec produktuview
The SEAFLO 23A Series pump is a self-priming, automatic demand diaphragm pump. Key features include:
- Open flow up to 1.5 GPM (5.6 LPM)
- Max Self-priming up to 5 feet (1.5m)
- Waterproof grade IP54 with extra cover
- On-demand long life pressure switch
- Configurable reflux function
- Ignition protected, CE, RoHS certified
- Multiple connector options for adaptability
Obrázek 1: Přední strana view of the SEAFLO 23A Series Automatic Demand Diaphragm Pump. Shows the pump body with 'FLOW' indicator and mounting tabs.
Obrázek 2: Zadní view of the SEAFLO 23A Series Automatic Demand Diaphragm Pump. Displays the motor housing and mounting points.
4. Nastavení a instalace
Proper installation is crucial for pump performance and longevity.
4.1 Montáž
- Mount the pump in a dry, well-ventilated area.
- Secure the pump to a solid surface using the integrated mounting tabs.
- Ensure the pump is mounted in a position that allows for easy access for maintenance and inspection.
4.2 Instalatérství
- Use appropriate fittings (2 fittings included) for your application.
- Connect the inlet hose to the pump's inlet port (indicated by 'FLOW' arrow).
- Connect the outlet hose to the pump's outlet port.
- Ensure all plumbing connections are tight to prevent leaks and air ingress.
- Install a filter on the inlet side to protect the pump from debris.
4.3 Elektrické připojení
- This pump operates on Corded Electric power. Refer to the pump label for specific voltage požadavky.
- Connect the pump to a fused power supply.
- Ensure correct polarity for DC models.
- All electrical connections should be made by a qualified professional and comply with local codes.
5. Návod k obsluze
The 23A Series is an automatic demand pump, meaning it will turn on and off based on system pressure.
- Základní nátěr: Once plumbing and electrical connections are complete, open a faucet or valve on the discharge side to allow air to escape. Turn on the power to the pump. The pump will begin to self-prime. Once a steady stream of water flows from the open faucet, close it. The pump will build pressure and shut off.
- Automatický provoz: The pump will automatically turn on when a demand for water is detected (e.g., opening a faucet) and turn off when the demand ceases and system pressure is restored.
- Suchý běh: The pump is capable of dry running without damage, but continuous dry running is not recommended.
6. Údržba
Pravidelná údržba zajišťuje optimální výkon a prodlužuje životnost čerpadla.
- Kontrola připojení: Periodically check all plumbing and electrical connections for tightness and signs of wear.
- Vyčistěte vstupní filtr: If an inlet filter is installed, clean it regularly to prevent debris from entering the pump.
- Zima: In freezing conditions, drain all water from the pump and plumbing system to prevent damage. Run non-toxic RV antifreeze through the system if necessary.
- Generální úklid: Udržujte vnější povrch čerpadla čistý a bez nečistot a úlomků.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v následující tabulce.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čerpadlo se nezapne | Žádné napájení; Spálená pojistka; Uvolněné zapojení; Vadný tlakový spínač | Check power supply; Replace fuse; Secure wiring; Contact support if switch is faulty. |
| Nízký průtok nebo žádný tlak | Clogged inlet filter; Air leak in suction line; Restricted discharge line; Low voltage | Clean filter; Check all suction connections; Clear discharge line; Verify voltage. |
| Čerpadlo běží nepřetržitě | Water leak in system; Air leak in suction line; Faulty pressure switch | Check for leaks in plumbing; Check suction connections; Contact support if switch is faulty. |
| Hlučný provoz | Air in system; Loose mounting; Debris in pump head | Bleed air from system; Tighten mounting screws; Inspect pump head for foreign objects. |
8. Specifikace
| Specifikace | Hodnota |
|---|---|
| Číslo modelu | SFDP1-005-120-23A |
| Flow Rate (Open Flow) | Až 1.5 GPM (5.6 LPM) |
| Maximální tlak | 120 PSI (8.2 barů) |
| Self-Priming Capability | Až 5 stop (1.5 m) |
| Zdroj napájení | Elektrický kabel |
| Vodotěsná třída | IP54 |
| Hmotnost položky | 1.54 libry |
| Rozměry balení | 7.09 x 4.13 x 2.76 palce |
| Zahrnuté komponenty | 1 Pump, 2 fittings |
9. Záruka a podpora
For warranty information and technical support, please contact SEAFLO customer service. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official SEAFLO webstránky nebo se obraťte na svého místního distributora.