Mount-It! MI-1882BLK Dual Monitor Desk Mount Instruction Manual

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Mount-It! MI-1882BLK Dual Monitor Desk Mount. Designed for monitors ranging from 13 to 32 inches and supporting up to 17.6 lbs per arm, this mount offers full motion adjustability to enhance your workspace ergonomics and efficiency. Please read all instructions carefully before assembly and use.

Mount-It! MI-1882BLK Dual Monitor Desk Mount with two monitors attached to a desk via C-clamp.

Image: The Mount-It! MI-1882BLK Dual Monitor Desk Mount, shown with two monitors mounted, illustrating its sleek design and space-saving capabilities.

Bezpečnostní informace

Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené. Nepoužívejte, pokud některé součásti chybí nebo jsou vadné.
Verify that your desk surface is strong enough to support the combined weight of the mount and your monitors.
Do not exceed the maximum weight capacity of 17.6 lbs (8 kg) per arm.
Always apply pressure to the arm and hold it in a horizontal position before adjusting the gas spring tension to avoid injury.
Během montáže držte děti a domácí zvířata mimo dosah.

Nastavení a instalace

Kompatibilita stolu

This monitor mount is compatible with desks between 0.4 inches (10mm) and 1.97 inches (50mm) thick.

Možnosti montáže

The MI-1882BLK offers two installation methods: C-clamp and Grommet base.

Diagram showing C-clamp and grommet mounting options for the dual monitor desk mount.

Image: Illustration of the C-clamp and grommet mounting options, detailing how the mount attaches to desks of varying thicknesses.

C-Clamp Instalace

Připojte C-clamp bracket to the main pole.
Position the mount at the desired location on your desk edge.
Utáhněte C-clamp screw until the mount is securely fastened to the desk.

Instalace základny průchodky

If your desk has an existing grommet hole, ensure it is between 0.4"-2.4" (10-60mm) in diameter and the desk thickness is 0.4"-1.6" (10-40mm). If not, drill a 3/8" (10mm) hole in your desired location.
Assemble the grommet base components as per the included hardware instructions.
Insert the grommet bolt through the desk hole from underneath.
Attach the main pole to the grommet bolt on top of the desk and tighten the hand knob from underneath until secure.

Attaching Monitors

This mount supports VESA 75x75mm and 100x100mm patterns.

Attach the VESA plate to the back of each monitor using the appropriate screws and washers provided. Ensure a secure fit without overtightening.
Slide the VESA plates onto the ends of the monitor arms.
Secure the monitors by tightening the knob on the height adjustment peg.

Instalační video

Video: A general

Související dokumenty - MI-1882BLK

	Mount-It! MI-8752BLK Dual Monitor Desk Mount Installation Manual Detailed installation guide for the Mount-It! MI-8752BLK Dual Monitor Desk Mount. Includes safety warnings, parts list, dimensions, weight capacity, step-by-step assembly instructions for clamp and grommet mounting, cable management, and support contact information.
	Mount-It! MI-4752 / MI-4752WHT Full Motion Dual Monitor Desk Mount User Manual Comprehensive user manual for the Mount-It! MI-4752 and MI-4752WHT full motion dual monitor desk mounts. Includes assembly instructions, parts list, dimensions, weight capacity, and adjustment guides for optimal setup and use.
	MOUNT-IT! Dual Monitor Desk Mount Installation Guide Comprehensive installation guide for the MOUNT-IT! dual monitor desk mount (model MI-2781). Provides step-by-step instructions for assembly, including unpacking, safety precautions, weighted and grommet base installation, arm attachment, VESA plate mounting, monitor mounting, and final adjustments for tilt and leveling. Includes a detailed parts list and tools required.
	MOUNT-IT! MI-792 Dual Monitor Desk Stand Installation Instructions Detailed installation guide for the MOUNT-IT! MI-792 dual monitor desk stand, covering unpacking, parts list, base mounting, arm installation, monitor attachment, adjustments, and wire management.
	Mount-It! MI-2752 Dual Monitor Desk Mount Installation Guide Comprehensive installation instructions for the Mount-It! MI-2752 dual monitor desk mount. Learn how to safely and securely attach your monitors to the desk using desk clamp or grommet base options.
	Mount-It! MI-2757 Freestanding Monitor Arm Installation Manual Comprehensive installation manual for the Mount-It! MI-2757 Freestanding Monitor Arm with Height Adjustment. Includes parts list, safety warnings, and step-by-step assembly instructions.