Návod k obsluze benzínového terénního kola X-PRO Hawk 60

1. Úvod

Thank you for choosing the X-PRO Hawk 60 Gas Powered Dirt Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new dirt bike. Please read this manual thoroughly before use to ensure proper handling and to maximize your riding experience. The X-PRO Hawk 60 is designed for recreational off-road use, featuring a powerful 58cc 4-stroke engine, CVT transmission, electric start, and disc brakes, making it suitable for young riders learning to ride.

2. Bezpečnostní informace

VAROVÁNÍ: Improper use of this motorcycle can cause serious injury or death. Always wear a helmet and appropriate safety gear, including gloves, long pants, and sturdy footwear. Never operate this vehicle on public roads. Never operate under the influence of drugs or alcohol. Never carry passengers. This dirt bike is not intended for sale in California.

VAROVÁNÍ: Apply throttle gradually from a standing/starting position. If full throttle is applied from a standing/starting position, the front wheel of the motorcycle can raise up, causing you to be thrown off the motorcycle, resulting in serious injury or death.

VAROVÁNÍ: This vehicle is intended for riders POD 16 years of age. Never operate over speeds too fast for your skill or road conditions.

3. Obsah balení

Po otevření balení se ujistěte, že jsou všechny součásti přítomny a nepoškozené. Balení by mělo obsahovat:

• X-PRO Hawk 60 Dirt Bike (partially assembled)
• Handlebar brackets
• Přední a zadní kola
• Brzdové komponenty
• SPZ
• Blatník
• Tréninková kola
• Toolkit (containing necessary wrenches, screwdrivers, etc.)
• Uživatelská příručka

4. Nastavení a montáž

Some assembly is required before operating your X-PRO Hawk 60 dirt bike. Please follow these steps carefully:

1. Rozbalení: Carefully open the packing box and remove the motorcycle and all accessories. Ensure you have all necessary tools from the toolkit.
2. Montáž předního kola: Remove the front brake caliper to prepare for installing the front wheel. Install the front wheel by placing the spacer before tightening the fixed nut. Reinstall the front brake caliper.
3. Instalace řídítek: Install the handlebar onto the triple clamp using the provided bolts and clamps. Ensure it is centered and securely tightened.
4. Instalace zadního tlumiče: Install the rear shock absorber, ensuring all bolts are tightened securely.
5. Front Fender and Number Plate: Install the front fender and then attach the number plate to the front of the handlebars.
6. Posilovací kolečka: Attach the training wheels to the rear axle, ensuring they are securely fastened and provide proper balance. Find the proper fit of the extension. Fix one side then tighten the other side till they all tighten. Double-check extension and tightness. Ensure training wheels are well-fixed.
7. Palivové potrubí: For safety during transport, the airvent hose has been pulled out. Remove the rubber cap and insert the hose back into the airvent.
8. Handlebar Pad: Install the handlebar pad for added safety.
9. Připojení baterie: Connect the battery terminals. Ensure the positive (+) terminal (red wire) is connected first, followed by the negative (-) terminal (black/green wire).

Montážní videa:

5. Návod k obsluze

The X-PRO Hawk 60 features a simple, gearless operation, making it ideal for beginners.

1. Směs paliva: This is a 2-stroke engine. Always use a 25:1 gas-to-oil mixture. Refer to the fuel container for proper mixing ratios.
2. Zapalování: Insert the key into the ignition switch (located on the side of the bike) and turn it to the 'ON' position.
3. Palivový ventil: Locate the fuel valve (petcock) near the carburetor and turn it to the 'ON' position.
4. Startování motoru: Use the pull starter to ignite the engine. A single pull should be sufficient.
5. Ovládání škrticí klapky: The bike operates without gears. Once started, gently twist the throttle on the right handlebar to accelerate.
6. brzdění: Use the brake levers on both handlebars to slow down and stop.
7. Zabiják: The kill switch (red button on the handlebar) will immediately shut off the engine. There is also a safety lanyard that will pull off and kill the engine if the rider falls.

6. Údržba

Regular maintenance is crucial for the longevity and safe operation of your dirt bike.

• Palivový systém: Regularly check the fuel lines and carburetor for any leaks or blockages. Ensure the correct fuel mixture is always used.
• brzdy: Inspect brake pads and cables regularly. Adjust or replace as needed to ensure optimal braking performance.
• pneumatiky: Check tire pressure before each ride. Ensure tires are free from punctures or excessive wear.
• Řetěz: Keep the drive chain clean, lubricated, and properly tensioned.
• Spojovací materiál: Pravidelně kontrolujte utažení všech matic, šroubů a spojovacího materiálu. Utáhněte všechny uvolněné součásti.
• Vzduchový filtr: Clean or replace the air filter regularly to maintain engine performance.

7. Specifikace

8. Záruka

This product comes with a 1-month warranty. Please refer to the warranty card included in your package for full details and terms.

9. Podpora

For any questions, technical assistance, or parts inquiries, please contact X-PRO customer support. Our dedicated team is committed to providing fast and reliable support to ensure your satisfaction and a smooth riding experience.