Zavedení
This manual provides instructions for the proper use and maintenance of the GODIAG Original OBD2 Extension Cable, Model SF276. This cable is designed to extend the connection between a vehicle's OBD2 port and a GODIAG GT100 or GT100+ ECU Breakout Box, facilitating diagnostic and testing procedures.
Konec produktuview
The GODIAG OBD2 Extension Cable (SF276) is a specialized diagnostic accessory. It features a standard OBD2 male connector, two OBD2 female connectors, and a DB15 connector, allowing for flexible connections in automotive diagnostic setups.
Image: The GODIAG OBD2 Extension Cable, showing its three distinct connectors: one male OBD2, two female OBD2, and one DB15 connector.
Pokyny pro nastavení
- Připojení k vozidlu: Locate the OBD2 diagnostic port in your vehicle, typically under the dashboard on the driver's side. Connect the male OBD2 connector of the extension cable to the vehicle's OBD2 port. Ensure a secure connection.
- Connect to GODIAG GT100/GT100+ Breakout Box: Connect the DB15 connector of the extension cable to the corresponding port on your GODIAG GT100 or GT100+ ECU Breakout Box.
- Connect Diagnostic Tool: Connect your diagnostic scan tool or other testing equipment to one of the female OBD2 ports on the extension cable. This allows the diagnostic tool to communicate with the vehicle via the breakout box.
Image: The extension cable facilitating a connection between a GODIAG GT100 breakout box and a diagnostic tablet, illustrating a typical setup.
Image: A GODIAG GT100 breakout box in use, connected to a vehicle's OBD2 port, demonstrating the cable's application in a vehicle environment.
Návod k obsluze
Once the GODIAG OBD2 Extension Cable is properly connected, it serves as a pass-through for communication between your vehicle, the GODIAG GT100/GT100+ breakout box, and your diagnostic tool. The breakout box allows for monitoring of communication lines and power supply during diagnostic procedures.
- Zapnutí: Ensure your GODIAG GT100/GT100+ breakout box and diagnostic tool are powered on according to their respective manuals.
- Diagnostické postupy: Perform diagnostic tests, ECU programming, or other functions as required by your specific diagnostic tool and the vehicle's requirements. The extension cable ensures stable data transmission.
- Sledování: Utilize the features of the GT100/GT100+ breakout box to monitor voltage, ground, and communication signals (e.g., CAN, K-Line) during operations.
Údržba
To ensure the longevity and reliable performance of your GODIAG OBD2 Extension Cable, follow these maintenance guidelines:
- Skladování: Store the cable in a clean, dry environment, away from direct sunlight and extreme temperatures. Avoid kinking or tightly coiling the cable.
- Čištění: V případě potřeby kabel a konektory jemně otřete měkkým, suchým hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
- Inspekce: Periodically inspect the connectors and cable for any signs of damage, such as frayed wires, bent pins, or cracked housing. Do not use a damaged cable.
- Zacházení: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling directly on the cable itself.
Obrázek: Podrobný view of the cable's connectors, highlighting the importance of careful handling to prevent pin damage.
Odstraňování problémů
If you encounter issues while using the GODIAG OBD2 Extension Cable, consider the following:
| Problém | Možná příčina | Řešení |
|---|---|---|
| No communication with vehicle/tool. | Loose connection, damaged cable, incorrect port. | Ensure all connectors are securely seated. Inspect the cable for visible damage. Verify the correct OBD2 port is used. |
| Přerušované připojení. | Cable wear, pin corrosion, unstable power. | Check for bent or corroded pins. Ensure the vehicle's battery voltage is stable. Replace cable if wear is significant. |
| Diagnostic tool not recognizing breakout box. | Breakout box issue, software conflict. | Refer to the GODIAG GT100/GT100+ manual for troubleshooting. Ensure diagnostic tool software is up to date. |
Specifikace
The following are the technical specifications for the GODIAG Original OBD2 Extension Cable (Model SF276):
- Model: SF276
- Značka: GODIAG
- Typ konektoru: OBD2 Male, OBD2 Female (x2), DB15
- Kompatibilita: GODIAG GT100, GODIAG GT100+ ECU Breakout Box
- Typ automobilového provedení: Specifické přizpůsobení vozidla
- Hmotnost položky: Přibližně 8.5 uncí (240 gramů)
- Rozměry balení: Přibližně 8 x 6.3 x 1.2 palce (20.3 x 16 x 3 cm)
- UPC: 889327085590
Záruka a podpora
For warranty information and technical support regarding your GODIAG Original OBD2 Extension Cable, please refer to the documentation provided with your GODIAG GT100/GT100+ ECU Breakout Box or visit the official GODIAG webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.
Výrobce: GODIAG
Kontakt: Please refer to the contact information provided with your GODIAG product or visit the official GODIAG support page.
