ANENG VD807 Contactless Voltage Návod k použití testeru

1. Úvod

The ANENG VD807 is a versatile contactless voltage tester designed for electrical equipment testing and maintenance. This device features an LCD display, an integrated flashlight, and provides audible and visual alarms for voltage detection. It is suitable for identifying live/neutral wires and locating wire breakpoints, making it an essential tool for electricians and homeowners.

2. Bezpečnostní informace

Důležitá bezpečnostní opatření:

• This device meets CAT II 1000V and CAT IV 600V IEC rated standards, ensuring reliable performance and adherence to safety regulations.
• Always exercise caution when working with electricity. Do not rely solely on the tester for safety; always follow proper electrical safety procedures.
• The alert feature provides a warning for voltages. When triggered, the screen turns red and a safety symbol glows, alerting the user of possible high voltage nebezpečí.
• Nepoužívejte zařízení, pokud se jeví poškozené nebo nefunguje správně.
• Udržujte zařízení suché a čisté.

3. Konec produktuview

The ANENG VD807 is a compact and convenient tool for electrical testing. Key features include:

• Bezkontaktní svtage Detekce (NCV): Detekuje AC svtage bez přímého kontaktu.
• LCD displej: Provides clear visual feedback, including voltage levels and detection status.
• Two-Color Screen: Green screen indicates a zero line, while a red screen indicates a live line.
• Integrovaná svítilna: Assists in working in dimly lit areas.
• Audible and Light Alarms: Poskytuje jasné indikace objemutage přítomnost.
• Wire Breakpoint Finder: Helps locate breaks in electrical wires.
• Pocket-sized Design: Snadno se nosí a používá.

Image: The ANENG VD807 tester showing its use in maintenance work and the removable pen cap feature.

4. Nastavení

4.1 Instalace baterie

The ANENG VD807 requires two (2) 1.5V AAA batteries for operation. To install or replace batteries:

1. Unscrew the battery compartment cap located at the bottom of the tester.
2. Vložte dvě 1.5V baterie AAA a dbejte na správnou polaritu (+/-).
3. Securely screw the battery compartment cap back into place.

Zařízení je nyní připraveno k použití.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

Press the power button (usually marked with a power symbol) to turn the device on. Press and hold the button to turn it off. The LCD display will illuminate upon activation.

5.2 Nekontaktní svtage (NCV) Detekce

Pro detekci hlasitosti střídavého proudutage bez přímého kontaktu:

1. Zapněte tester.
2. Position the sensing tip of the tester near an AC power outlet, a terminal, or an AC cable.
3. The tester will detect AC signals. LED lights will activate, and beeps will sound with varying frequencies depending on the detected voltage síla.

Image: The ANENG VD807 demonstrating non-contact voltage (NCV) induction near an electrical outlet.

Image: The ANENG VD807 detecting AC voltage by positioning its tip near a live point.

5.3 Live/Neutral Wire Identification

The live wire detector automatically identifies live or neutral wires. When the tip is near a live wire, the tester will indicate a stronger signal (faster beeps, brighter LEDs, red screen). A neutral wire will typically show no or a very weak signal (green screen).

5.4 Wire Breakpoint Finding

To locate a breakpoint in a wire:

1. Ensure the wire is energized (live).
2. Move the tester along the length of the wire.
3. The tester will indicate voltage presence up to the point of the break. The signal will cease or significantly weaken past the breakpoint.

Image: Two ANENG VD807 testers illustrating the process of finding a line breakpoint in a cable.

5.5 LCD Display Interpretation

The LCD display provides visual cues for detection:

• Zelená obrazovka: Typically indicates a zero line or low voltage detekce.
• Červená obrazovka: Indicates a live line or higher voltage detection, often accompanied by a safety symbol for high voltage nebezpečí.
• The display may also show signal strength bars and voltage čtení.

Image: The ANENG VD807's two-color display screen, showing green for a zero line and red for a live line.

5.6 Funkce svítilny

The integrated LED flashlight can be activated to illuminate dark work areas. Refer to the device's specific button layout for flashlight activation (often a dedicated button or a long press of the power button).

Image: The ANENG VD807 with its LED flashlight illuminated, providing light for inspection.

6. Údržba

• Čištění: Zařízení otřete suchým, měkkým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Skladování: Tester skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Výměna baterie: Replace batteries promptly when the low battery indicator appears to ensure accurate readings. Remove batteries if the device will not be used for an long period.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

ANENG provides lifetime service and technical support for the VD807 Contactless Voltage Tester. For any inquiries, troubleshooting assistance, or warranty claims, please contact ANENG customer service through their official channels.