Uživatelská příručka k WC sedátku Geberit 300 Basic s víkem

1. Úvod

Thank you for choosing the Geberit 300 Basic Toilet Seat with Lid. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new toilet seat. Please read these instructions carefully before beginning installation and retain them for future reference.

Figure 1: Geberit 300 Basic Toilet Seat with Lid. This image shows the Geberit 300 Basic Toilet Seat with Lid in white, featuring its D-shaped design.

2. Bezpečnostní informace

• Před instalací se vždy ujistěte, že je toaletní mísa čistá a suchá.
• Do not use abrasive cleaners or harsh chemicals on the toilet seat, as this may damage the material.
• Avoid standing on the toilet seat or lid, as this can cause damage or injury.
• Během instalace uchovávejte malé součásti mimo dosah dětí.
• Pokud některé díly chybí nebo jsou poškozené, nepokračujte v instalaci. Kontaktujte zákaznickou podporu.

3. Obsah balení

Please check that all components are present before beginning installation:

• Geberit 300 Basic Toilet Seat
• Geberit 300 Basic Toilet Lid
• Montážní materiál (šrouby, podložky, matice)

4. Nastavení a instalace

Follow these steps to install your Geberit 300 Basic Toilet Seat:

1. Příprava toaletní mísy: Ensure the toilet bowl's mounting holes are clean and free of debris. If replacing an old seat, remove it completely.
2. Position the Mounting Hardware: Insert the bolts through the mounting holes on the toilet bowl.
3. Připevněte sedadlo: Place the toilet seat onto the bolts, aligning the seat's hinge points with the bolts.
4. Zajistěte sedadlo: From underneath the toilet bowl, place washers onto the bolts, followed by the nuts. Hand-tighten the nuts initially.
5. Upravit zarovnání: Adjust the position of the seat to ensure it is centered and aligned with the toilet bowl.
6. Konečné utažení: Once aligned, fully tighten the nuts. Do not overtighten, as this can damage the ceramic or the seat.

Refer to the diagrams below for product dimensions to ensure compatibility with your toilet bowl:

Obrázek 2: Nahoře View Dimensions. A technical drawing illustrating the top-down view of the toilet seat, indicating a width of 370mm and a length of 445mm.

Obrázek 3: Strana View Dimensions. A technical drawing illustrating the side profile of the toilet seat, showing a height of approximately 5mm for the lid.

5. Návod k obsluze

The Geberit 300 Basic Toilet Seat is designed for straightforward use:

• To use the toilet, simply lift the lid and then the seat.
• After use, gently lower the seat and then the lid.

6. Údržba a čištění

Proper maintenance ensures the longevity and hygiene of your toilet seat:

• Pravidelný úklid: Clean the toilet seat regularly with a mild soap solution and a soft cloth.
• Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can scratch or discolor the plastic surface.
• Sušení: Po čištění sedadlo vždy důkladně osušte, abyste zabránili vzniku skvrn od vody a zachovali hygienu.
• Péče o panty: Periodically check the hinge connections for tightness. If the seat feels loose, gently retighten the mounting nuts.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

For warranty information or technical support, please refer to the official Geberit website or contact your local Geberit dealer. Please have your model number (S8H51203000G) available when contacting support.

Výrobce: Geberit

Date of Availability on Amazon.com.be: 8. listopadu 2021