AQQA DC Aquarium Water Pump (Model AQ169)

1. Úvod

Thank you for choosing the AQQA DC Aquarium Water Pump. This manual provides essential information for the safe and efficient operation of your pump. Designed for versatility, this pump is suitable for various aquatic environments, including freshwater and saltwater aquariums, ponds, fountains, and hydroponic systems. Its smart control features, quiet operation, and durable design ensure reliable performance.

Image 1: AQQA DC Aquarium Water Pump, showing the pump unit, external controller, and two interchangeable nozzles.

2. Bezpečnostní informace

Před použitím čerpadla si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• Před prováděním jakékoli údržby, instalace nebo čištění vždy odpojte napájení.
• Ensure the pump is fully submerged in water during operation to prevent dry burning and damage.
• Nepoužívejte čerpadlo, pokud je poškozený napájecí kabel nebo zástrčka.
• This pump is designed for indoor use in aquatic environments only. Do not use it for purposes other than those specified.
• Uchovávejte mimo dosah dětí.
• The pump operates on a 12V DC low-voltage output, reducing shock risks. However, always handle electrical components with care.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x AQQA DC Aquarium Water Pump
• 1 x externí ovladač
• 2 x Interchangeable Nozzles (6/8mm and 10/12mm)
• 1 x Power Cord (approximately 10.83 ft)
• 1 x Návod k použití

4. Konec produktuview

The AQQA DC Aquarium Water Pump is a compact and efficient submersible pump featuring an external controller for easy operation.

Pump Unit Features:

• Ponorný design: IP68 waterproof rating for continuous underwater operation.
• Tichý provoz: Pure copper motor ensures low noise levels (<30dB).
• Přísavky: Four strong suction cups on the base for secure placement.
• Návrh nízké hladiny vody: Capable of operating effectively at water levels as low as 1.5cm (0.59 inches), allowing for thorough drainage.
• Ochrana proti suchému hoření: Automatically shuts off if water levels are too low to prevent damage.

Image 2: The AQQA pump unit highlighting its anti-dry burning protection feature, which prevents damage when water levels are too low.

External Controller Features:

• Tlačítko ON/OFF: Zapíná nebo vypíná čerpadlo.
• Flow Adjustment Buttons (+/-): Adjusts water flow rate across 4 levels.
• Tlačítko FEED: Activates feeding mode, pausing the pump for 10 minutes.
• Kontrolky: Display current flow rate/lift level and feeding mode status.

Image 3: Close-up of the external controller, showing the ON/OFF, flow adjustment (+/-), and FEED buttons, along with indicator lights for flow rate and feeding mode.

5. Nastavení

Follow these steps to install your AQQA DC Aquarium Water Pump:

1. Vyberte trysku: Select the appropriate nozzle (6/8mm or 10/12mm) for your tubing system and securely attach it to the pump's outlet.
2. Poloha čerpadla: Place the pump unit at the desired location within your aquarium, pond, or water feature. Ensure it is fully submerged. The four suction cups on the base will help secure it to a clean, smooth surface.
3. Připojit ovladač: Connect the pump's cable to the external controller.
4. Připojte napájení: Plug the power cord from the controller into a suitable electrical outlet (110V-240V).
5. Ověřte hladinu vody: Ensure the water level is sufficient to cover the pump completely. The pump can operate at low water levels (down to 1.5cm) but full submersion is recommended for optimal performance and longevity.

Image 4: The AQQA pump demonstrating its ability to operate effectively at low water levels, with all-around suction at the bottom to remove dirt.

6. Návod k obsluze

The external controller provides easy access to all pump functions.

Zapnutí/vypnutí:

• Stiskněte tlačítko ON/OFF button once to turn the pump on or off.

Nastavení průtoku:

• Použijte + tlačítko pro zvýšení průtoku.
• Použijte - tlačítko pro snížení průtoku.
• There are 4 adjustable flow levels, indicated by the lights on the controller.

Režim krmení:

• To activate feeding mode, press and hold the KRMIVO tlačítko na 5 sekund.
• The pump will pause for 10 minutes, allowing fish to feed without strong currents.
• After 10 minutes, the pump will automatically restart at its previous flow setting.

7. Údržba

Regular cleaning and maintenance will ensure the longevity and optimal performance of your pump.

1. Odpojit napájení: Před jakoukoli údržbou vždy odpojte čerpadlo od elektrické zásuvky.
2. Demontáž čerpadla: The pump is designed for tool-free disassembly. Gently remove the filter cover and then the impeller assembly.
3. Čisté komponenty: Rinse all parts (impeller, filter cover, pump housing interior) under clean water. Use a soft brush to remove any accumulated debris, algae, or mineral deposits. Ensure the impeller spins freely.
4. Znovu sestavit: Carefully reassemble the pump, ensuring all parts fit correctly.
5. Pravidelné kontroly: Periodically check the pump and tubing for any blockages or wear.

Obrázek 5: Rozložený view of the AQQA pump, illustrating how to easily disassemble the outlet nozzle, filter cover, and motor for cleaning without tools.

8. Řešení problémů

Pokud se s čerpadlem setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:

9. Specifikace

10. Záruka a podpora

AQQA stands behind the quality of its products. For specific warranty details and terms, please refer to the warranty information provided at the time of purchase or visit the official AQQA webmísto.

If you require technical assistance, have questions about your product, or need to report an issue, please contact AQQA customer support through the retailer where you purchased the product or via the contact information available on the official AQQA webmísto.

Please have your model number (AQ169) and purchase date ready when contacting support.