WdtPro TDL011

WdtPro Solar Fence Lights Outdoor User Manual

Značka: WdtPro

Model: TDL011

Zavedení

Thank you for choosing WdtPro Solar Fence Lights. These lights are designed to provide efficient and versatile outdoor illumination, enhancing the ambiance and safety of your outdoor spaces. Featuring two lighting modes (Cool White 6000K and Warm Light 3500K), upgraded focused LEDs, and advanced solar technology, these lights are built for durability and long-lasting performance.

This manual provides detailed instructions for the setup, operation, and maintenance of your WdtPro Solar Fence Lights to ensure optimal performance and longevity.

Six WdtPro solar fence lights illuminating a white fence at night.

Image: WdtPro Solar Fence Lights illuminating a fence. These lights provide focused illumination for outdoor areas.

Klíčové vlastnosti

  • Duální režimy osvětlení: Easily switch between 6000K Cool White and 3500K Warm Light to match your outdoor aesthetic.
  • Focused Beam & Energy-Saving: Advanced reflective lenses create a 50-lumen focused beam, covering a wider area with 30% higher solar conversion efficiency.
  • Rozšířená doba běhu: Equipped with monocrystalline solar panels and a 600mAh battery, providing 10-12 hours of illumination after 6-8 hours of charging.
  • Odolné a odolné vůči povětrnostním vlivům: Constructed from high-quality ABS materials with IP65 waterproof protection, designed to withstand various weather conditions.
  • Všestranná instalace: Suitable for fences, decks, patios, walls, stairs, and more.
Comparison of WdtPro solar light with a V-shaped beam versus another light with a wider, less focused beam.

Image: Illustration showing the focused V-shaped beam of WdtPro lights compared to a less focused beam from other lights, highlighting brighter illumination.

Diagram illustrating the wider and brighter beam of WdtPro lights, showing a 70-degree angle and 78-inch spread from 6 feet height, with an inset of convex lensed LED components.

Image: Diagram detailing the wider and brighter beam produced by the convex lensed LEDs, showing light spread and components.

Obsah balení

  • WdtPro Solar Fence Lights (6 Pack)
  • Montážní šrouby

Nastavení a instalace

Proper installation is crucial for the optimal performance of your solar lights. Please follow these steps carefully:

1. Vyberte správné místo

Select a location where the solar panel can receive přímé sluneční světlo for at least 6-8 hours daily. Avoid areas under trees, eaves, or other obstructions that may cast shadows on the solar panel, as this will significantly reduce charging efficiency and runtime.

Comparison image showing a solar light placed under a tree's shadow (incorrect) versus one in direct sunlight (correct).

Image: Illustration demonstrating the importance of direct sunlight for solar panel charging.

Also, ensure the installation area is away from other strong light sources (e.g., streetlights, porch lights) at night. These external light sources can trigger the light sensor, preventing the solar light from turning on automatically.

Comparison image showing a solar light near a streetlight (incorrect) versus one in a dark environment (correct).

Image: Illustration showing how external light sources can interfere with the solar light's automatic operation.

2. Počáteční aktivace

Before first use, please remove the protective film from the solar panel. Allow the lights to charge in direct sunlight for 6-8 hours to ensure the battery is fully charged.

Image showing a WdtPro solar light on a fence, with an arrow indicating the solar panel and text 'First Time Use: Please Remove the Protective Film'.

Image: Instructions for initial activation, including removing the protective film from the solar panel.

3. Montáž světel

The WdtPro Solar Fence Lights can be installed using two methods:

  1. Screw Installation (Recommended):
    • Mark the desired mounting points on the surface.
    • V případě potřeby vyvrtejte vodicí otvory.
    • Align the light with the holes and secure it using the included screws.
  2. Adhesive Tape Installation (Not Included):
    • Důkladně očistěte montážní povrch, aby byl suchý a bez prachu nebo mastnoty.
    • Apply strong outdoor-grade double-sided adhesive tape (not included) to the back of the light.
    • Press the light firmly onto the desired surface for several seconds.
Diagram showing two installation methods: screw installation with screws and a light, and tape installation showing the back of the light.

Image: Illustration of the two available installation methods for the solar lights.

Návod k obsluze

Your WdtPro Solar Fence Lights are designed for simple, automatic operation.

Funkce automatického zapnutí/vypnutí

The lights are equipped with a built-in light sensor. They will automatically turn on at dusk and turn off at dawn, provided they have received sufficient sunlight during the day.

Image showing a WdtPro solar light charging in sunlight during the day and automatically lighting up a fence at night.

Image: Depiction of the automatic dusk-to-dawn operation of the solar lights.

Přepínání režimů osvětlení

Each light features a button to switch between the two available lighting modes:

  • Mode 1: Warm Light (3500K) - Provides a soft, inviting glow.
  • Mode 2: Cool White (6000K) - Offers a brighter, more modern illumination.

Press the button located on the light to cycle between these modes until you reach your desired color temperature.

Comparison image showing WdtPro solar lights illuminating a fence in Warm Light mode (3500K) and Cool White Light mode (6000K).

Image: Visual representation of the two distinct lighting modes: Warm Light and Cool White Light.

Údržba

Regular maintenance ensures the longevity and optimal performance of your WdtPro Solar Fence Lights.

Čištění

Solární panel pravidelně otírejte měkkým hadříkemamp cloth to remove dust, dirt, leaves, or snow. A clean solar panel ensures maximum sunlight absorption and charging efficiency.

Odolnost vůči povětrnostním vlivům

These lights are designed with IP65 waterproof protection and are built from durable ABS materials to withstand various weather conditions, including rain, snow, frost, and sleet. No special weather-related maintenance is typically required beyond ensuring the solar panel remains clear.

Image of a WdtPro solar light on a wall with roses below, illustrating its IP65 waterproof, heat, frost, and windproof features.

Image: Illustration highlighting the all-weather readiness of the solar lights, including IP65 waterproof rating.

Odstraňování problémů

If your WdtPro Solar Fence Lights are not functioning as expected, please refer to the following common issues and solutions:

ProblémMožná příčinaŘešení
Světla se v noci nerozsvěcují.
  • Nedostatečné sluneční záření během dne.
  • Solární panel je znečištěný nebo ucpaný.
  • Light sensor is activated by other strong light sources nearby.
  • Initial protective film not removed.
  • Relocate the light to an area that receives 6-8 hours of direct sunlight.
  • Pravidelně čistěte solární panel.
  • Ensure the light is not installed near streetlights, porch lights, or other bright lights.
  • Odstraňte ochrannou fólii ze solárního panelu.
Světla jsou tlumená nebo svítí jen krátkou dobu.
  • Insufficient charging due to cloudy weather or poor placement.
  • Solární panel je špinavý.
  • Baterie není plně nabitá.
  • Ensure the light receives maximum direct sunlight. Allow for a full day's charge before expecting full runtime.
  • Vyčistěte solární panel.
  • Verify the light is in a dark environment at night.
Light mode cannot be changed.
  • Button malfunction or debris.
  • Gently press the button multiple times. Ensure no debris is obstructing the button.
  • Pokud problém přetrvává, kontaktujte zákaznickou podporu.

Specifikace

FunkceDetail
ZnačkaWdtPro
Název modeluTDL011
BarvaČerný
MateriálAkrylonitrilbutadienstyren (ABS)
Rozměry produktu4.6 cm D x 2.6 cm Š x 1.8 cm V
Hmotnost položky1.63 pounds (for 6 Pack)
Zdroj napájeníSolární napájení
Typ světelného zdrojeLED (Convex Lensed)
Režimy barev světlaCool White (6000K), Warm Light (3500K)
Lumen výstup50 lumens (focused beam)
Kapacita baterie600 XNUMX mAh
Doba nabíjení6-8 hodin (přímé sluneční světlo)
Pracovní doba10–12 hodin (po plném nabití)
Úroveň odolnosti proti voděIP65 Vodotěsný
Typ instalaceSurface Mount (Screws included)
Comparison table showing WdtPro's upgraded features like high efficiency laminated solar panel, upgraded bright lenses, 600mAh battery, and 10-12 hours working time versus others.

Image: Detailed comparison of WdtPro's upgraded features and specifications.

Záruka a podpora

WdtPro stands behind the quality of its products. For specific warranty details, please refer to the product packaging or contact the retailer where you purchased the item. Generally, products are covered by a standard manufacturer's warranty against defects in materials and workmanship.

If you encounter any issues or have questions regarding your WdtPro Solar Fence Lights, please contact WdtPro customer support through the retailer's platform or the official WdtPro website. Please have your model number (TDL011) and purchase information ready when contacting support.

For more information, visit the official WdtPro store: WdtPro Store on Amazon.

Související dokumenty - TDL011

Předview Difuzér WdtPro S3000: Příslušenství k baterce pro 3D tisk
Stáhněte si difuzér WdtPro S3000, 3D tisknutelné příslušenství pro svítilnu WdtPro. Navrženo společností MarAlMe a dostupné na Printables. Kompatibilní s tiskárnami Prusa MK3/S/S+. Vyrobeno z PETG filamentu.