Zavedení
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your RESTMO Sprinkler Timer. Please read this manual carefully before use to ensure proper function and longevity of your device.
Obrázek: Přední strana view of the RESTMO 2-Zone Sprinkler Timer, displaying its large LCD screen, control dial, and brass connections.
Konec produktuview
Klíčové vlastnosti
- Reliable & Leak-Proof Design: Features pure brass inlet and outlet metal threads for enhanced durability and high working pressure (max. 120psi) to prevent water leakage. Weatherproof construction with UV-resistant material.
- Dual Independent Zones: Two independent outlets, each capable of setting up to 3 separate watering programs.
- Více možností programování: Each zone supports 3 distinct programs (P1, P2, P3) for a total of 6 customizable schedules.
- Flexible Watering Schedules: Watering frequency from 1-23 hours or 1-30 days. Watering duration from 1 minute to 299 minutes.
- Uživatelsky přívětivé rozhraní: Large 3.2-inch LCD display for easy readability. Oversized dial for setting clock, start time, duration, and frequency.
- Manual & Rain Delay Functions: Manual watering without interrupting preset programs. Long press delay button to pause programs for 0, 24, 48, or 72 hours during rainy conditions.
Komponenty
Image: Detailed diagram illustrating the components of the RESTMO Sprinkler Timer, including the LCD screen, control dial, buttons, and brass inlet/outlet dimensions.
- Brass Inlet: Connects to faucet (3/4" NH thread).
- Brass Outlets (x2): Connects to hoses (3/4" NH thread).
- LCD obrazovka: Displays time, program settings, and zone status.
- Ovládací volič: Used to navigate through settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON/OFF).
- Tlačítko OK: Potvrzuje výběr.
- +/- tlačítka: Adjust values and activate Delay function.
- ZN/P Button: Switches between zones (Left/Right) and selects programs (P1/P2/P3).
- Tlačítko MANUAL: Aktivuje ruční zavlažování.
- Přihrádka na baterie: Located on the back, requires 2 AA alkaline batteries.
Nastavení
1. Instalace baterie
- Vyhledejte přihrádku na baterie na zadní straně časovače.
- Sejměte kryt baterie.
- Insert two (2) new AA alkaline batteries (not included), ensuring correct polarity (+/-).
- Bezpečně nasaďte kryt baterie.
Obraz: View of the open battery compartment, showing the correct placement of two AA batteries.
2. Připojení časovače
- Ujistěte se, že je kohoutek zavřený.
- Thread the brass inlet of the timer onto your outdoor faucet. Hand-tighten until secure. The 360° swivel brass inlet allows for easy positioning.
- Connect your garden hoses or drip irrigation lines to the brass outlets at the bottom of the timer. Ensure a tight, leak-proof connection.
- Turn on the faucet fully. The timer is designed to withstand high pressure, but ensure there are no leaks at the connections.
Image: The sprinkler timer connected to a faucet, with close-ups of the pure brass inlet thread and pure brass outlet, emphasizing durability and leak-proof design.
Návod k obsluze
1. Nastavení hodin
- Rotate the control dial to NASTAVIT HODINY.
- Číslice hodin budou blikat. Použijte +/- tlačítka pro nastavení hodiny.
- Stiskněte OK to confirm the hour. The minute digits will flash.
- Použijte +/- tlačítka pro nastavení minut.
- Stiskněte OK to confirm the minutes. The day of the week will flash.
- Použijte +/- buttons to select the current day (e.g., MO for Monday).
- Stiskněte OK to save the clock settings.
2. Programming Watering Schedules (P1, P2, P3)
Each zone (Left and Right) can have up to three independent programs (P1, P2, P3). You can switch between zones using the ZN/P tlačítko.
Obrázek: Detailní záběr view of the LCD screen, illustrating the display of program settings (P1, P2, P3) and current time.
- Vyberte zónu: Krátce stiskněte ZN/P button to switch between ZONE L (Left) and ZONE R (Right).
- Vyberte program: Dlouze stiskněte ZN/P button to cycle through P1, P2, P3. Select the program you wish to set.
- Nastavit čas zahájení:
- Otočte voličem na ČAS STARTU.
- Použití +/- to set the desired start hour and minute.
- Stiskněte OK potvrdit.
- Nastavit dobu trvání:
- Otočte voličem na JAK DLOUHO.
- Použití +/- to set the watering duration from 1 minute to 299 minutes.
- Stiskněte OK potvrdit.
- Nastavit frekvenci (frekvence):
- Otočte voličem na JAK ČASTO.
- Použití +/- to set the watering frequency:
- Každých 1–23 hodin.
- Every 1-30 days.
- Specific days of the week (e.g., MO, TU, WE...).
- Stiskněte OK potvrdit.
- Aktivace programu: Otočte voličem na ON. The timer will now run according to your programmed schedules. To turn off all programs, rotate the dial to VYPNUTO.
Image: Visual representation of setting up three distinct watering programs (P1, P2, P3) with different start times, durations, and frequencies.
3. Ruční zavlažování
The manual watering function allows for immediate watering without affecting your preset programs.
- Ujistěte se, že je volič nastaven na ON.
- Dlouze stiskněte MANUÁL button. The display will show a flashing duration.
- Použijte +/- buttons to set the desired manual watering duration (1 to 299 minutes).
- Stiskněte OK pro spuštění ručního zavlažování.
- To stop manual watering, long press the MANUÁL button again, or rotate the dial to VYPNUTO a pak zpět do ON.
Image: Instructions for activating manual watering by long-pressing the MANUAL button, and for activating rain delay by long-pressing the DELAY button.
4. Funkce zpoždění deště
The rain delay function temporarily pauses your watering programs to conserve water during rainy periods.
- Ujistěte se, že je volič nastaven na ON.
- Dlouze stiskněte ZPOŽDĚNÍ button. The display will show "0h".
- Použijte +/- tlačítky vyberte požadovanou dobu odložení: 24 hodin, 48 hodin nebo 72 hodin.
- Stiskněte OK to activate the rain delay. The timer will resume its programmed schedule after the selected delay period.
- To cancel the rain delay, long press the ZPOŽDĚNÍ button again until "0h" is displayed, then press OK.
Image: The timer displaying the rain delay function, showing options to delay watering for 0, 24, 48, or 72 hours.
5. Výběr zóny
The RESTMO Sprinkler Timer features two independent zones (Left and Right) that can be controlled separately.
- Krátce stiskněte ZN/P button to toggle between ZONE L (Left) and ZONE R (Right).
- When setting programs, ensure you are in the correct zone (L or R) for which you intend to create or modify a schedule.
Image: The timer displaying "ZONE L" and "ZONE R", with an arrow pointing to the ZN button, indicating how to switch between the left and right watering zones.
Údržba
- Výměna baterie: Replace batteries annually or when the low battery indicator appears on the LCD screen. Always use new AA alkaline batteries.
- Čištění: Clean the timer's exterior with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Obrazovka filtru: Periodically check the filter screen inside the brass inlet for debris. If clogged, remove and rinse it under running water.
- Zima: Before freezing temperatures, disconnect the timer from the faucet and hoses. Remove batteries. Store the timer indoors in a dry, frost-free location. Failure to do so may result in damage not covered by warranty.
- Prevence úniku: Ensure all connections are hand-tightened. If leaks occur, check for worn washers and replace if necessary.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Timer not turning on/LCD blank. | Vybité nebo nesprávně vložené baterie. | Replace batteries with new AA alkaline batteries. Ensure correct polarity. |
| Water not flowing. | Faucet is off; timer is set to OFF; low water pressure; clogged filter; program not set correctly. | Turn on faucet. Rotate dial to ON. Check water pressure (8-120 psi required). Clean inlet filter. Verify program settings. |
| Timer leaks at connections. | Loose connections; worn washers; damaged threads. | Tighten connections. Replace rubber washers if worn. Inspect threads for damage. |
| Programs not running at scheduled times. | Timer set to OFF; incorrect clock setting; rain delay active; program deleted or incorrectly set. | Ensure dial is ON. Reset clock. Check if rain delay is active. Re-program schedules. |
| LCD screen is faded or unreadable. | Exposure to direct, intense sunlight/heat; low battery. | Relocate timer to a shaded area if possible. Replace batteries. If problem persists, contact customer support. |
Specifikace
- Model: O-HT-2
- Inlet/Outlet Thread: 3/4" NH (pure brass)
- Independent Zones: 2
- Independent Programs: Up to 3 per zone (P1, P2, P3)
- Pracovní tlak: 8–120 PSI (0.5–8 barů)
- Maximální průtok: 10 GPM (35 LPM)
- Pracovní teplota: 3–50 °C (38–120 °F)
- Frekvence zalévání: 1-23 hours or 1-30 days
- Délka zalévání: 1 minuta až 299 minut
- Zdroj napájení: 2 x AA alkalické baterie (nejsou součástí balení)
- Velikost obrazovky: 3.2 palce
- Rozměry: 3 cm H x 5 cm Š x 3 cm V (přibližně)
- Hmotnost: 1.06 libry (0.48 kg)
- Materiál: Brass, UV-resistant plastic
Záruka a podpora
Restmo is committed to providing reliable and intelligent watering solutions. For any questions, concerns, or technical assistance regarding your sprinkler timer, please contact Restmo Customer Service.
While specific warranty details are not provided in this manual, Restmo aims to ensure customer satisfaction. Please retain your proof of purchase for any warranty claims.
For further support, visit the official Restmo store or contact their customer service channels as provided with your product packaging or on their official webmísto.
Image: The official Restmo brand logo.
