1. Úvod
This user manual provides essential information for the safe and effective operation of your Monport 50W Fiber Laser Engraver, Model YXF50. This integrated mini fiber laser marking machine is designed for high-precision engraving and marking on various metal and non-metal materials. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.
Figure 1.1: Monport 50W Fiber Laser Engraver, Model YXF50.
2. Bezpečnostní informace
WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always follow safety precautions.
2.1 Všeobecné bezpečnostní pokyny
- Ochrana očí: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm) when the machine is in operation.
- Ochrana kůže: Zabraňte přímému vystavení kůže laserovému paprsku.
- Větrání: Ensure adequate ventilation in the work area to remove fumes and particles generated during engraving. Consider a fume extractor.
- Požární bezpečnost: Keep a fire extinguisher nearby. Do not engrave flammable materials without proper precautions.
- Dozor: Nikdy nenechávejte stroj během provozu bez dozoru.
- Autorizovaný personál: Only trained and authorized personnel should operate the laser engraver.
- Nouzové zastavení: Seznamte se s umístěním a obsluhou tlačítka nouzového zastavení.
2.2 Elektrická bezpečnost
- Ujistěte se, že je stroj řádně uzemněn.
- Nepracujte s mokrýma rukama nebo v damp podmínky.
- Před prováděním jakékoli údržby nebo seřizování odpojte napájení.
3. Nastavení a instalace
The Monport 50W Fiber Laser Engraver is designed for straightforward setup. Follow these steps to prepare your machine for operation.
3.1 Vybalení a kontrola
- Opatrně vyjměte všechny součásti z obalu.
- Inspect the machine for any signs of damage during transit. Report any damage to Monport support immediately.
- Verify all accessories listed in the packing list are present.
3.2 Montáž
The integrated design minimizes assembly. Typically, this involves securing the laser head column to the base unit.
- Place the base unit on a stable, level surface.
- Attach the vertical column with the laser head to the designated mounting points on the base. Secure it firmly using the provided screws.
- Connect any necessary cables (power, USB) as indicated in the quick start guide included with your machine.
Figure 3.1: Compact design and key specifications of the Monport 50W Fiber Laser Engraver.
3.3 Instalace softwaru
Your Monport 50W Fiber Laser Engraver is compatible with LightBurn and BSLcad software. Installation files and backup parameters are typically provided on a USB drive included in the packaging.
- Vložte dodaný USB disk do počítače.
- Follow the instructions on the USB drive to install your preferred software (LightBurn or BSLcad).
- Install the necessary drivers for the laser engraver to communicate with your computer.
- Configure the software according to the provided parameters for your specific machine model (YXF50).
4. Návod k obsluze
This section outlines the basic steps for operating your Monport 50W Fiber Laser Engraver.
4.1 Zapnutí a úvodní kontroly
- Ensure all safety precautions are in place, including wearing laser safety glasses.
- Connect the power cable and turn on the main power switch on the machine.
- Launch the engraving software (LightBurn or BSLcad) on your computer.
- Verify that the software recognizes the laser engraver.
4.2 Umístění materiálu a zaostřování
- Place your material on the work platform.
- Adjust the Z-axis (height of the laser head) until the laser is properly focused on the material surface. The machine features a red dot pointer to assist with focusing and positioning.
- Důležité: Remember to remove the lens cap before operation.
Figure 4.1: Optimal marking area of 150x150mm for the 50W fiber laser.
4.3 Software Operation and Engraving
- Importujte nebo vytvořte svůj návrh přímo v softwaru.
- Set engraving parameters such as power, speed (up to 10000mm/s), frequency, and passes based on the material and desired effect.
- Použijte funkci rámování v softwaru k předběžnémuview the engraving area on your material.
- Initiate the engraving process. Monitor the machine closely during operation.
Obrázek 4.2: Přesview of key features including 10000mm/s speed and 50W power.
Figure 4.3: Illustration of the 0.01mm ultra-fine spot precision.
4.4 Kompatibilní materiály
The Monport 50W Fiber Laser Engraver is suitable for marking and engraving a wide range of materials:
- Kovy: Gold, Silver, Copper, Stainless Steel, Brass, Titanium, Aluminum, Platinum, etc.
- Plasty: Certain types of plastics.
- Ostatní: Some ceramics, leather, painted metals.
Obrázek 4.4: Přamples of materials compatible with the fiber laser engraver.
5. Údržba
Regular maintenance ensures optimal performance and extends the lifespan of your Monport 50W Fiber Laser Engraver.
5.1 Čištění objektivu
The F-theta field lens is a critical component. Keep it clean to maintain engraving quality.
- Frekvence: Clean the lens regularly, especially if you notice a decrease in engraving quality or power.
- Postup: Use a specialized lens cleaning solution and lint-free wipes. Avoid touching the lens surface with bare hands.
5.2 Obecné čištění
- Keep the work area and the machine's exterior free of dust and debris.
- Ujistěte se, že ventilační mřížky nejsou zablokované.
5.3 Aktualizace softwaru
Periodically check for software updates for LightBurn or BSLcad to benefit from new features and performance improvements.
6. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat, a nabízí možná řešení.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný laserový výstup | Lens cap still on, emergency stop engaged, power issue, software not connected. | Remove lens cap, disengage emergency stop, check power connections, verify software connection. |
| Špatná kvalita gravírování | Incorrect focus, dirty lens, incorrect power/speed settings, material not suitable. | Adjust focus, clean lens, optimize engraving parameters, ensure material compatibility. |
| Machine not recognized by software | USB cable issue, driver not installed, software configuration error. | Check USB cable, reinstall drivers, verify software settings. |
| Red dot pointer not visible | Pointer disabled in software, hardware malfunction. | Enable pointer in software settings. If issue persists, contact support. |
7. Specifikace
Key technical specifications for the Monport 50W Fiber Laser Engraver (Model YXF50):
- Model: YXF50
- Typ laseru: Vláknový laser
- Výkon laseru: 50W (50000 mW output power)
- Třída laseru: třída 4
- Max. Rychlost značení: 10000 mm/s
- Přesnost gravírování: 0.01 mm
- Pracovní oblast: 150 mm × 150 mm (5.9" × 5.9")
- Max Z-Height: 350 mm
- Životnost: Až 100,000 hodin
- Kompatibilní software: LightBurn, BSLcad
- Kompatibilní operační systémy: Windows, macOS
- Hmotnost produktu: 14.5 kg (34 lb)
- Materiál: Hliník
- Barva: Šedá
- Provozní režim: Manuál
Figure 7.1: Speed capabilities of the Monport 50W Fiber Laser Engraver.
8. Záruka a podpora
8.1 Informace o záruce
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Monport webUschovejte si doklad o koupi pro případ reklamace.
8.2 Zákaznická podpora
If you encounter any issues not covered in this manual or require technical assistance, please contact Monport customer support. You can find contact information on the official Monport webwebu nebo prostřednictvím vaší nákupní platformy.
Monport Direct: Informace o prodejci
Figure 8.1: Optional accessories for enhanced functionality and safety.
