Monport 60W JPT & MOPA Fiber Laser Engraver (Model GM60) User Manual

1. Konec produktuview

The Monport 60W JPT & MOPA Fiber Laser Engraver (Model GM60) is a compact and powerful laser marking machine designed for precision engraving and cutting on various materials. It features a JPT MOPA laser source, enabling true color marking and deep engraving capabilities. The system is equipped with a customized galvanometer for high speed and accuracy.

Klíčové vlastnosti:

• Integrovaný design: Smaller footprint and lighter weight while maintaining high performance.
• Vysoká rychlost a přesnost: Max marking speed of 10,000mm/s and carving accuracy of 0.01mm.
• Optimal Marking Area: A 175x175mm marking area is optimized for consistent engraving quality.
• True Color Marking: JPT MOPA laser allows for color marking on stainless steel, brass, and aluminum blackening.
• Deep Engraving & Cutting: Capable of 2.5D and deep metal engraving, and some metal sheet cutting.
• Dlouhá životnost: Laser source designed for up to 100,000 hours of operation.
• Kompatibilita softwaru: Supports BSLcad and LightBurn.

Obrázek 1.1: Konecview of the Monport 60W JPT & MOPA Fiber Laser Engraver.

2. Bezpečnostní pokyny

Operating a fiber laser engraver involves potential hazards. Adhere to all safety precautions to prevent injury and damage to the equipment. This section outlines general safety practices; always refer to local regulations and specific safety instructions provided with the machine.

Obecná bezpečnostní opatření:

• Ochrana očí: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm for fiber lasers) when the machine is in operation.
• Ochrana kůže: Zabraňte přímému vystavení kůže laserovému paprsku.
• Větrání: Ensure adequate ventilation or use a fume extractor to remove fumes and particles generated during engraving, especially when working with materials like leather or certain plastics.
• Požární bezpečnost: Keep a fire extinguisher nearby. Do not engrave highly flammable materials without proper precautions.
• Elektrická bezpečnost: Ensure the machine is properly grounded and connected to a stable power supply. Do not operate with wet hands or in damp prostředí.
• Pracovní oblast: Keep the work area clear of clutter and unauthorized personnel. Consider using a protection enclosure.
• Nouzové zastavení: Seznamte se s umístěním a obsluhou tlačítka nouzového zastavení.
• Materiálová kompatibilita: Only engrave materials known to be safe for fiber lasers. Avoid materials that produce toxic fumes or reflect the laser beam dangerously.

3. Obsah balení

Upon unpacking, verify that all items listed below are present and undamaged. If any components are missing or damaged, contact Monport customer support immediately.

• GM 60 Fiber Laser Engraver Unit
• Napájecí kabel
• USB kabel
• Laserové ochranné brýle
• Focusing Ruler/Gauge
• Software Installation Media (or download instructions)
• Uživatelská příručka (tento dokument)

4. Pokyny k nastavení

4.1 Vybalení a umístění

1. Opatrně vyjměte laserový gravírovací stroj a veškeré příslušenství z obalu.
2. Place the engraver on a stable, level surface in a well-ventilated area. Ensure sufficient space around the machine for operation and maintenance.
3. Note the machine's dimensions: approximately 370mm (width) x 300mm (depth) x 550mm (height).

Image 4.1: The Monport 60W Fiber Laser Engraver with approximate dimensions.

4.2 Připojení stroje

1. Connect the power cable to the engraver's power input and then to a grounded electrical outlet.
2. Connect the USB cable from the engraver to your computer. If experiencing connectivity issues, try routing the USB through a powered port or using an adapter for USB-C to standard USB.
3. Ujistěte se, že jsou všechna připojení bezpečná.

4.3 Instalace softwaru

The Monport GM60 supports BSLcad and LightBurn software. Refer to the provided software installation guide for detailed instructions.

1. Insert the software installation media or download the latest version of BSLcad or LightBurn from the official Monport webmísto.
2. Follow the on-screen prompts to install the software and necessary drivers.
3. Launch the software and configure the machine settings according to the software's documentation.

5. Návod k obsluze

5.1 Zapnutí a úvodní kontroly

1. Ensure all safety precautions are in place, including wearing laser safety glasses.
2. Turn on the main power switch on the engraver.
3. Launch the engraving software (BSLcad or LightBurn) on your computer.

5.2 Material Preparation and Placement

1. Select a suitable material for engraving (e.g., metal, leather, certain plastics).
2. Place the material securely within the 175x175mm marking area on the work platform.
3. Use the red dot pointer and the focusing ruler to set the correct focal distance for your material. Adjust the Z-axis (laser head height) until the red dots converge or the ruler indicates optimal focus.

5.3 Proces gravírování

1. Design Import: Import or create your design within the engraving software.
2. Nastavení parametrů: Adjust laser parameters such as power, speed, frequency, and pulse width based on the material and desired effect. Monport provides reference parameters for various materials and color marking.
3. Předview: Použijte předběžné nastavení softwaruview function to ensure the design is correctly positioned on the material.
4. Začněte gravírovat: Spusťte proces gravírování ze softwaru. Pečlivě sledujte proces.

Image 5.1: Illustration of the laser's precision, capable of 0.01mm accuracy.

5.4 Advanced Engraving Techniques

• Barevné značení: Utilize the JPT MOPA laser's adjustable frequency (1-4000kHz) and pulse width (2-500ns) to achieve various colors on metals like stainless steel and brass. Experiment with parameters to achieve desired hues.
• Deep Engraving & 2.5D Engraving: For deeper marks or 2.5D effects, adjust power and multiple passes. Higher power generally enhances deep engraving and cutting capabilities.
• Rotary Axis (Optional): If using an optional rotary axis, refer to its specific manual for setup and operation with cylindrical objects.

Obrázek 5.2: Příkladamples of materials compatible with the Monport fiber laser, including color marking capabilities.

6. Údržba a péče

Regular maintenance ensures optimal performance and extends the lifespan of your Monport fiber laser engraver.

6.1 Čištění

• Čištění objektivu: The F-theta field mirror and protective lens should be cleaned regularly with specialized lens cleaning solution and wipes to prevent dust and debris from affecting laser quality.
• Pracovní oblast: Keep the work platform and surrounding area clean from debris and dust.
• Vnější: Otřete vnější povrch stroje měkkým, suchým hadříkem.

6.2 Obecná údržba

• Kontrola kabelů: Periodically check all cables for signs of wear or damage.
• Aktualizace softwaru: Keep your engraving software updated to the latest version for performance improvements and new features.
• Podmínky prostředí: Operate the machine in a stable environment, avoiding extreme temperatures or humidity.

7. Řešení problémů

This section addresses common issues you might encounter. For problems not listed here, contact Monport customer support.

8. Technické specifikace

9. Zákaznická podpora a záruka

Monport is committed to providing excellent customer service. If you encounter any issues or have questions regarding your Monport 60W JPT & MOPA Fiber Laser Engraver, please contact our support team.

Kontaktní údaje:

• Webmísto: Visit the official Monport webweb s zdrojy podpory, častými dotazy a kontaktními údaji.
• E-mail: Vyhrazenou e-mailovou adresu podpory naleznete v dokumentaci k nákupu.
• Telefon: Check the Monport webweb s telefonními čísly zákaznického servisu.

Informace o záruce:

Your Monport 60W JPT & MOPA Fiber Laser Engraver is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or the official Monport webPodrobné podmínky, včetně doby trvání záruky a krytí, naleznete na webových stránkách.