Důležité bezpečnostní pokyny
Read all instructions carefully before operating this electric snow blower. Failure to follow these instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.
- Vždy používejte vhodné osobní ochranné prostředky, včetně ochrany očí a protiskluzové obuvi.
- Ujistěte se, že pracovní prostor je zbaven nečistot, kamenů a dalších předmětů, které by mohly být vymrštěny šnekem.
- Do not operate the snow blower in wet conditions or rain.
- Udržujte ruce, nohy a oděv mimo dosah pohyblivých částí.
- Disconnect power before performing any maintenance or clearing blockages.
- Use only UL-rated extension cords suitable for outdoor use and the snow blower's ampvymazat.
- Do not overload the machine by attempting to clear snow beyond its rated capacity.
Obsah balení
Při vybalení ověřte, zda jsou všechny položky přítomny:
- PowerSmart Electric Snow Blower Unit
- Montáž rukojeti
- Sestava vyhazovacího žlabu
- Hardware Pack (bolts, knobs, clips)
- Uživatelská příručka
Nastavení
1. Montáž rukojeti
Attach the upper handle to the lower handle using the provided bolts and knobs. Ensure the handle is securely fastened and comfortable for operation.
2. Discharge Chute Installation
Mount the discharge chute onto the snow blower body. Secure it with the designated fasteners, ensuring it can rotate freely for snow direction control.
This image illustrates the adjustable discharge chute, capable of rotating 180 degrees to direct snow. The chute is black with red adjustment levers.
3. Připojení napájení
Connect a suitable outdoor-rated extension cord to the snow blower's power inlet. Ensure the connection is secure and protected from moisture. The unit features overload protection for safety.
Návod k obsluze
Konecview of the PowerSmart 21-inch Electric Snow Blower, showing its main components including the handle, chute, and auger housing.
1. Předprovozní kontrola
- Inspect the area to be cleared for any obstacles.
- Zkontrolujte dotažení všech upevňovacích prvků.
- Ensure the power cord is in good condition and properly connected.
2. Starting the Snow Blower
Stiskněte a podržte bezpečnostní tlačítko a poté stiskněte pojistný spínač pro spuštění motoru. Jakmile se motor rozběhne, bezpečnostní tlačítko uvolněte.
3. Odklízení sněhu
Push the snow blower forward at a steady pace. The 21-inch clearing width and 12.5-inch clearing depth allow for efficient snow removal. The 15-amp motor and 2100 RPM auger can handle up to 800 pounds of snow per minute.
This image shows the snow blower in action, demonstrating its 21-inch clearing width and 12.5-inch clearing depth for maximum efficiency.
4. Adjusting Throw Distance and Direction
Use the adjustable chute deflector and 180-degree rotating chute to control the snow throwing distance (up to 30 feet) and direction. This minimizes repeated passes and optimizes the snow clearing process.
This image illustrates the snow blower's capability to throw snow up to 30 feet away, allowing for efficient clearing of large areas.
5. Using LED Lights
The dual LED lights provide enhanced visibility during operation in low-light conditions, improving safety and convenience.
Údržba
1. Po každém použití
- Odpojte napájecí kabel.
- Clear any remaining snow or ice from the auger housing and chute using a non-metallic tool.
- Otřete vnější povrchy reklamouamp tkanina.
2. Pravidelná prohlídka
- Check the auger blades for wear or damage. The reinforced auger is designed for durability.
- Inspect the power cord for cuts, fraying, or exposed wires. Replace if damaged.
- Ujistěte se, že všechny matice, šrouby a vruty jsou pevně utažené.
This image highlights the reinforced auger, designed to ensure continuous snow removal and durability.
3. Skladování
Store the snow blower in a clean, dry area, away from direct sunlight and moisture. Ensure the power cord is neatly coiled and secured.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Sněhová fréza se nestartuje. | Power cord not connected; Safety button/bail switch not engaged; Overload protection activated. | Ensure power cord is securely plugged in. Engage safety button and bail switch simultaneously. Disconnect power, wait a few minutes, then try again. Check for blockages. |
| Reduced snow throwing performance. | Chute clogged; Auger worn; Wet, heavy snow. | Disconnect power, then clear chute with a non-metallic tool. Inspect auger for damage. Clear smaller sections of snow. |
| Jednotka se během provozu zastaví. | Overload protection activated; Power interruption; Blockage. | Disconnect power, clear any blockages, wait for motor to cool, then restart. Check power source. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | PowerSmart |
| Číslo modelu | DB7521 |
| Výrobce | Amerisun Inc. |
| Zdroj napájení | Elektrické střídavé kabely |
| Motor | 15 Amp |
| Auger Speed | 2100 ot./min |
| Vymazání šířky | 21 palců |
| Hloubka čištění | 12.5 palců |
| Dosah odhazování sněhu | Až 30 stop |
| Rozměry produktu | 94 cm (H) x 50.8 cm (Š) x 96.5 cm (V) / 37 palců (H) x 20 palců (Š) x 38 palců (V) |
| Hmotnost položky | 22.68 kg / 50 liber |
| Barva | Červený |
| Speciální funkce | Dual LED Lights, 180-degree Rotating Chute, Adjustable Chute Deflector, Overload Protection |
Záruka a podpora
For warranty information or technical support, please refer to the warranty card included with your product or contact PowerSmart customer service. Keep your purchase receipt as proof of purchase.
Contact information for support is typically found on the manufacturer's official webmístě nebo na obalu produktu.
