Zavedení
This manual provides detailed instructions for the setup, operation, and maintenance of your JALL 16.2" Large Digital Wall Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- JALL 16.2" Digital Wall Clock
- Dálkové ovládání
- Power Cord (USB)
- Napájecí adaptér USB (5V/2A)
- Montážní šablona
- Mounting Clips/Hardware
- Uživatelská příručka
Nastavení
1. Připojení napájení
- Connect the provided USB power cord to the clock's power input port.
- Zapojte napájecí adaptér USB do standardní zásuvky ve zdi.
- Displej hodin se rozsvítí.
2. Initial Time Synchronization (Bluetooth)
The clock supports automatic time synchronization via Bluetooth with your smartphone for ease of setup.
- Ujistěte se, že je na vašem smartphonu povoleno Bluetooth.
- The clock will automatically attempt to connect and sync time settings daily.
- Once connected, the time and date on the clock will automatically adjust to your phone's settings.
Image: Bluetooth Time Synchronization in progress.
Video: Konecview of the JALL Digital Wall Clock, demonstrating Bluetooth time synchronization and various features.
Návod k obsluze
1. Zobrazení času a data
- The clock displays time (12-hour or 24-hour format), day of the week, month, and date.
- Teplotu lze zobrazit ve stupních Celsia (°C) nebo Fahrenheita (°F).
- Seconds can also be displayed instead of temperature. Use the 'Temp/Sec' button on the remote to toggle.
Image: Switching between seconds and temperature display modes.
2. Barevné režimy
The clock features 8 color options, including 4 pure colors and 4 RGB gradient modes. You can also 'freeze' a specific color from the RGB gradient.
- Press the 'Display Colors' button on the remote to cycle through available color modes.
- To freeze a color in RGB mode, press the 'freeze' button on the remote when your desired color is displayed.
Obrázek: Přamples of the 8 available color modes.
3. Nastavení jasu
The clock features automatic brightness adjustment and manual dimming options.
- Automatické stmívání: The built-in light sensor automatically adjusts display brightness based on ambient light conditions. Activate this feature using the 'AUTO DIMMER' button on the remote.
- Manuální stmívání: Use the 'DIMMER' button on the remote to manually adjust brightness levels.
Image: Auto Dimming feature adjusting brightness based on time of day.
4. Alarmy
The clock supports setting multiple alarms.
- Use the 'AL1 SET' or 'AL2 SET' buttons on the remote to configure alarm times.
- Pomocí tlačítek „+“ a „-“ nastavte hodinu a minutu.
- Press 'OK' to confirm settings.
- Toggle alarms on/off using 'AL1 ON/OFF' or 'AL2 ON/OFF'.
5. Odpočítávací časovač
A countdown timer function is available for various activities, supporting up to 99 minutes.
- Press the timer button (often labeled with a clock icon) on the remote to activate the timer function.
- Use the '+' and '-' buttons to set the desired countdown duration.
- Press 'OK' to start the countdown.
Image: 99-minute countdown timer in use.
6. Letní čas (DST)
The clock can automatically adjust for Daylight Saving Time.
- Press the 'AUTO DST' button on the remote to enable or disable automatic DST adjustment.
Image: Automatic Daylight Saving Time adjustment.
7. Noční světlo
A bottom-mounted night light provides a soft ambiance.
- Press the 'Light' button on the remote to turn the night light on or off.
Image: Warm Night Light feature.
Montáž a umístění
The JALL Digital Wall Clock offers flexible placement options, suitable for both wall mounting and desktop use.
Umístění na plochu
The clock can be placed on any flat surface such as a desk, shelf, or countertop.
Image: Clock in desktop placement with remote.
Montáž na stěnu
For wall mounting, use the provided mounting template and hardware.
- Use the mounting template to mark the desired positions for the screws on the wall.
- Install the mounting clips/screws into the marked positions.
- Carefully hang the clock onto the installed hardware.
- The power cord can be routed through designated channels on the back of the clock for a tidy appearance.
Image: Wall-mounted clock with dimensions.
Image: Back of the clock showing power input and battery compartment.
Funkce dálkového ovládání
The included remote control provides convenient access to all clock features:
- AL1 SET / AL2 SET: Set Alarm 1 / Alarm 2.
- AL1 ON/OFF / AL2 ON/OFF: Turn Alarm 1 / Alarm 2 on or off.
- NASTAVENÍ ČASU: Manuálně nastavte čas.
- 12H/24H: Toggle between 12-hour and 24-hour time formats.
- +: Increase value / Navigate up.
- -: Decrease value / Navigate down.
- OK: Potvrďte výběr.
- Světlo: Turn night light on/off.
- Barvy displeje: Cycle through display colors.
- freeze: Freeze current color in RGB mode.
- STMÍVÁNÍ: Manually adjust display brightness.
- AUTOMATICKÝ STMÍVÁNÍ: Enable/disable automatic brightness adjustment.
- AUTO DST: Enable/disable automatic Daylight Saving Time adjustment.
- Temp/Sec: Toggle between temperature and seconds display.
- Ikona časovače: Activate countdown timer.
- Ikona hlasitosti: Upravte hlasitost budíku.
- BT: Activate Bluetooth pairing mode.
Specifikace
| Značka | JALL |
| Číslo modelu | PH01-T |
| Typ zobrazení | Digitální LED |
| Velikost displeje | 16.2 palců |
| Rozměry produktu | 15.35 cm Š x 5.1 cm V |
| Zdroj napájení | Elektrický kabel (adaptér 5V/2A) |
| Zálohování baterie | CR2023 Button Cell (for memory retention) |
| Speciální funkce | Bluetooth Sync, 8 RGB Color Modes, Auto DST, Temperature Display, Night Light, Auto Dimming, Countdown Timer, Dual Alarms |
| Typ montáže | Držák na stěnu, Stolní |
Odstraňování problémů
Temperature Display Stuck
If the temperature display appears stuck or does not update, especially after changing color modes, follow these steps:
- Change the clock's color mode to "White+Gradient" or "Gradient+White".
- Wait for 5 minutes. During this period, the temperature lock will be released.
- After 5 minutes, you can select your preferred color.
- Wait another 5 minutes. The temperature display should now function as intended.
- If you select "White+Gradient" or "Gradient+White" again, you may need to repeat these steps.
Clock Not Powering On
- Ensure the power cord is securely connected to both the clock and the USB power adapter.
- Verify that the USB power adapter is firmly plugged into a working wall outlet.
- Try using a different USB power adapter or outlet to rule out power source issues.
Bluetooth Sync Issues
- Ensure your smartphone's Bluetooth is turned on and discoverable.
- Bring your smartphone closer to the clock.
- Restart both the clock (by unplugging and replugging) and your smartphone.
Údržba
- Čištění: Use a soft, dry cloth to gently wipe the clock's display and casing. Vyhněte se abrazivním čisticím prostředkům nebo rozpouštědlům.
- Bateriová záloha: The CR2023 button cell battery retains time settings during power outages. Replace it if settings are lost after a power interruption.
Záruka a podpora
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official JALL webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.
