Uživatelská příručka k laboratornímu zdroji OWON SPE8105

1. Úvod

This manual provides comprehensive instructions for the safe and effective use of the OWON SPE8105 Programmable DC Power Supply. It covers product features, component identification, setup procedures, operating instructions, maintenance guidelines, troubleshooting tips, and detailed technical specifications. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.

Figure 1: OWON SPE8105 Lab Power Supply and included accessories (power cord, USB cable).

2. Konec produktuview

2.1 Klíčové vlastnosti

• Multi-Information Display: A 2.8-inch TFT LCD simultaneously displays set and actual voltage, current, output power, cumulative runtime, and channel status. It automatically switches to Constant Current (CC) mode if the actual current exceeds the preset value.
• Více ochranných funkcí: Includes current limit, thermal, voltage overload (OVP), short circuit, and overpower protection to enhance durability and longevity.
• Pohodlný design USB portu: Features a 5V/1A USB output port for charging mobile devices and a rear USB communication port for firmware updates and PC software control.
• Adjustable Power Supply: Constant power design with a wide application range, allowing flexible configuration of higher voltage and current within the rated power. Programmable with four groups of shortcut parameters and supports waveform editing and editable timing output for up to ten groups.
• Kompaktní a lehký: Measures 3.2 x 8.9 x 5.6 inches and weighs 3.3 pounds, optimizing workbench space and portability.

2.2 Součásti předního panelu

Figure 2: Front and Rear Panel Layout of the OWON SPE8105.

1. 2.8-inch LCD: Displays operational parameters and settings.
2. Current Setting Button: Used to adjust current parameters.
3. Overcurrent Protection Setting (OCP): Configures overcurrent protection limits.
4. Nastavovací knoflík: Rotary encoder for parameter adjustment.
5. Channel Output On/Off Button: Activates or deactivates the output. Long press for automatic output function.
6. Channel Output Terminals: Connect positive (red), negative (black), and ground (green) leads.
7. Shortcut Output Button (Memory): Accesses stored parameters. Long press to enter the List waveform timing output interface.
8. Tlačítko zobrazení: Toggles display modes or information.
9. Přepětítage Protection Setting (OVP): Configures overvoltage ochranné limity.
10. svtage Setting Button (V): Používá se k nastavení hlasitostitage parametry.

2.3 Součásti zadního panelu

• Inteligentní regulace teploty ventilátoru: Provides cooling for the unit.
• pojistka: Overcurrent protection for the input power.
• Vypínač: Zapíná nebo vypíná jednotku.
• USB Device Communication Port: For PC software control and firmware updates.
• Zásuvka napájecího kabelu: Connects the power supply to the AC mains.

3. Nastavení

1. Rozbalení: Carefully remove the power supply and all accessories from the packaging. Verify that all components listed in the package contents are present.
2. Umístění: Place the power supply on a stable, level surface with adequate ventilation. Ensure that the fan vents on the rear panel are not obstructed.
3. Připojení napájení: Connect the provided power cord to the power cord socket on the rear panel of the device, then plug the other end into a grounded AC power outlet (100-240V AC).
4. Výstupní připojení: Connect your load to the output terminals on the front panel. Ensure correct polarity: red for positive (+), black for negative (-), and green for ground.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• To power on, press the power switch on the rear panel to the 'ON' position. The LCD will illuminate.
• To power off, press the power switch on the rear panel to the 'OFF' position.

4.2 Nastavení Voltage a proud

Obrázek 3: Detailní view of the 2.8-inch IPS LCD display.

• Press the 'V' button to select voltage adjustment. Rotate the adjustment knob to set the desired voltage.
• Press the 'I' button to select current adjustment. Rotate the adjustment knob to set the desired current limit.
• The display shows set values (Set) and actual output values.

4.3 Output Enable/Disable

• Press the 'On/Off' button to enable or disable the output to the connected load. The 'ON' or 'OFF' indicator on the display will change accordingly.
• A long press of the 'On/Off' button may activate an automatic output function, if configured.

4.4 Ochranné funkce (OVP/OCP)

• Přepětítage Ochrana (OVP): Press the 'OVP' button to set the maximum allowable output voltagE. Pokud je výstupní objemtage exceeds this limit, the power supply will shut down the output to protect the load.
• Nadproudová ochrana (OCP): Press the 'OCP' button to set the maximum allowable output current. If the output current exceeds this limit, the power supply will switch to CC mode or shut down the output.

4.5 Funkce paměti

• The 'Memory' button allows you to store and recall up to four groups of frequently used voltage a aktuální nastavení.
• A long press on the 'Memory' button will enter the List waveform timing output interface for advanced programming.

4.6 Použití USB portu

• The front 5V/1A USB port can be used to charge compatible mobile devices.
• The rear USB communication port allows connection to a PC for software control and firmware updates. Refer to the OWON website for compatible software and update procedures.

5. Údržba

• Čištění: Disconnect the power supply from the AC mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Větrání: Ensure that the ventilation openings are kept clear of dust and debris to prevent overheating.
• Výměna pojistky: If the fuse blows, disconnect the power cord and replace it with a fuse of the same type and rating (refer to specifications).
• Skladování: Pokud se napájecí zdroj delší dobu nepoužívá, skladujte jej v suchém a bezprašném prostředí.

6. Řešení problémů

• Bez napájení: Check the power cord connection and ensure the power switch is in the 'ON' position. Verify the AC outlet is functional and check the fuse on the rear panel.
• Žádný výstup: Ensure the output is enabled using the 'On/Off' button. Check for active OVP or OCP conditions that might have shut down the output. Verify connections to the load.
• Nesprávný výstup: Ověřte svtage and current settings. Ensure the load is connected correctly and is within the power supply's operating range.
• Přehřívání: Ensure adequate ventilation around the unit. Clear any obstructions from the fan vents. Reduce the load if operating continuously at high power.
• For persistent issues, refer to the detailed troubleshooting guide on the OWON support webnebo kontaktujte zákaznický servis.

7. Specifikace

Figure 4: OWON SPE8105 Product Specifications.

Note: The instrument must be operated continuously for more than 30 minutes at the specified operating temperature to achieve the following specifications. Ripple & Noise bandwidth 20MHz, ripple bandwidth 1MHz, connect 10uF electrolytic capacitor in parallel with 0.1uF ceramic capacitor to the output terminal for testing.

Figure 5: OWON SPE8105 dimensions and internal component layout.

8. Záruka a podpora

OWON products are designed for reliability and performance. For warranty information, technical support, or service, please contact your local distributor or visit the official OWON webUschovejte si účtenku jako doklad o koupi pro případ reklamace.

Manufacturer: ZHANGZHOU LILLIPUT ELECTRONIC TECHNOLOGY CO.,LTD.