Zavedení
This manual provides detailed instructions for the 8BitDo Ultimate Mini Wired Controller for Xbox. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. This controller is officially licensed for Xbox and compatible with Xbox Series X|S, Xbox One, and Windows 10/11.
Nastavení
The 8BitDo Ultimate Mini Wired Controller is designed for simple plug-and-play functionality. Follow these steps to connect your controller:
- Ensure your Xbox console (Xbox Series X|S, Xbox One) or Windows PC (Windows 10/11) is powered on.
- Vyhledejte volný USB port na konzoli nebo počítači.
- Connect the USB-C end of the provided cable to the controller and the USB-A end to your console or PC.
- The controller will automatically be detected and configured. The Xbox button on the controller will illuminate to indicate a successful connection.
- For audio, connect a standard CTIA connector 3.5mm headset to the audio jack located on the controller.
The controller is now ready for use. No additional drivers are typically required for supported systems.
Obsluha ovladače
The 8BitDo Ultimate Mini Wired Controller features a standard layout with several advanced functionalities:
- Joysticky s Hallovým efektem: These joysticks provide enhanced precision and durability, reducing drift over time.
- Impulsní spouštěče: Experience tactile feedback with vibration in the triggers, adding immersion to your gameplay.
- Vylepšené nárazníky a D-pad: Designed for a responsive and tactile feel, ensuring accurate inputs.
- Crystal Action Buttons: Durable and clear action buttons for a consistent feel.
RGB Lighting Fire Ring
The controller features interactive RGB lighting around the joysticks, known as the 'Fire Ring'. This lighting can be adjusted through multiple modes:
- Fire Ring Mode: Displays a dynamic lighting effect.
- Light-tracing Mode: Follows your joystick movements with light.
- Rainbow Ring Mode: Cycles through a spectrum of colors.
To cycle through the lighting modes or turn off the lighting, locate the small button positioned below the right analog stick. Press this button to change modes or deactivate the lighting as desired.
Údržba
Proper maintenance ensures the longevity and performance of your 8BitDo Ultimate Mini Wired Controller:
- Čištění: K otření povrchu ovladače použijte měkký, suchý hadřík. V případě odolné nečistoty lehceampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners, as these can damage the controller's finish and internal components.
- Skladování: Řídicí jednotku skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot. Nepokládejte na ni těžké předměty.
- Péče o kabely: Handle the USB-C cable gently. Avoid sharp bends, kinks, or pulling the cable forcefully from the port. If the cable becomes damaged, replace it with a compatible USB-C cable to ensure proper functionality and safety.
Odstraňování problémů
Pokud narazíte na problémy s ovladačem, podívejte se na následující běžná řešení:
- Ovladač nereaguje:
- Ujistěte se, že je kabel USB bezpečně připojen k ovladači i konzoli/počítači.
- Zkuste připojit ovladač k jinému USB portu.
- Test the controller on another compatible device (if available) to determine if the issue is with the controller or the original device.
- Restartujte konzoli nebo počítač.
- Lighting Issues (Too Bright/Not Working):
- Press the small button located below the right analog stick to cycle through lighting modes or turn the lighting off/on. Repeated presses will change the effect or brightness.
- Nefunkční audio konektor:
- Ensure your headset uses a standard CTIA connector.
- Verify the headset is fully plugged into the 3.5mm audio jack on the controller.
- Vyzkoušejte sluchátka s mikrofonem s jiným zařízením, abyste se ujistili, že fungují správně.
- Vstupní zpoždění nebo výpadky:
- Ensure the USB cable is not damaged. Replace if necessary.
- Avoid using USB hubs if possible; connect directly to the console/PC.
Pokud tyto kroky problém nevyřeší, podívejte se prosím do sekce Podpora, kde vám pomohou.
Specifikace
| Funkce | Popis |
|---|---|
| Číslo modelu | 6922621507000 |
| Konektivita | Wired USB (USB-C to USB-A) |
| Kompatibilita | Xbox Series X|S, Xbox One, Windows 10/11 |
| Speciální funkce | Hall Effect Joysticks, Impulse Triggers, RGB Lighting Fire Ring (multiple modes), Refined Bumpers and D-pad, 3.5mm Audio Jack (CTIA standard), Crystal Action Buttons |
| Rozměry | 7.48 x 5.51 x 0.79 palce (189.9 x 140 x 20 mm) |
| Hmotnost | 11.99 unce (340 gramů) |
Záruka a podpora
Informace o záruce: This product comes with a manufacturer's warranty. Please refer to the warranty card included in the product packaging or visit the official 8BitDo webpodrobné záruční podmínky naleznete na webu.
Zákaznická podpora: For technical assistance, product inquiries, or warranty claims, please visit the official 8BitDo support page or contact their customer service through the contact information provided on their webwebu. Před kontaktováním podpory se ujistěte, že máte k dispozici číslo modelu produktu (6922621507000) a doklad o koupi.
