Tunze Turbelle NanoStream 6040.005 HUB Edition Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Tunze Turbelle NanoStream 6040.005 HUB Edition. This high-performance stream pump is designed for aquariums ranging from 20 to 500 liters (5.3 to 132 USgal.), offering adjustable flow rates and smart control capabilities.

The Turbelle NanoStream 6040.005 HUB Edition is equipped with a WIFI/Cloud-based controller (Turbelle Controller 7020) for precise flow management and features a compact design for easy integration into your aquarium.

2. Bezpečnostní pokyny

Always disconnect the power supply before performing any maintenance or installation work on the pump.
Ensure the power supply unit is placed in a dry area, away from water splashes.
Do not operate the pump if the power cord or any part of the unit is damaged.
This device is intended for indoor use only and for aquariums.
Uchovávejte mimo dosah dětí.
The pump must be fully submerged during operation.

3. Obsah balení

Zkontrolujte prosím, zda jsou v balení přítomny všechny položky:

Tunze Turbelle NanoStream 6040.005 Pump
Turbelle Controller 7020 (WIFI/Cloud-based)
Power Supply Unit (100-240V / 50-60Hz)
Magnet Holder (for glass thickness up to 12 mm / 1/2”)
Deflektor průtoku
Návod k použití

4. Nastavení a instalace

Follow these steps to properly install your Turbelle NanoStream 6040.005 pump:

4.1. Umístění čerpadla

Tunze Turbelle NanoStream 6040.005 pump mounted on aquarium glass with magnet holder

Image: The Turbelle NanoStream 6040.005 pump securely mounted to the aquarium glass using its magnet holder.

Vyberte umístění: Select a position in your aquarium where the pump can create optimal water flow without disturbing substrate or corals excessively. Ensure the pump is fully submerged.
Attach Magnet Holder: Place the pump unit inside the aquarium and align the external magnet holder on the outside of the glass. The strong magnets will secure the pump in place. The magnet holder is suitable for glass thicknesses up to 12 mm (1/2 inch).
Upravit směr: The pump's outlet can be rotated to direct the water flow as desired.

4.2. Připojení ovladače

Tunze Turbelle Controller 7020 with various buttons and display for flow control

Image: The Tunze Turbelle Controller 7020, showing its interface for adjusting pump settings and modes.

Připojení čerpadla k řídicí jednotce: Plug the pump's cable into the designated port on the Turbelle Controller 7020.
Připojte napájecí zdroj: Plug the power supply unit into the controller, then plug the power supply into a suitable electrical outlet.
Počáteční zapnutí: The pump will perform a brief self-test upon initial power-up.

5. Návod k obsluze

The Turbelle NanoStream 6040.005 is controlled via the Turbelle Controller 7020, offering various modes and settings.

5.1. Ovladač Overview

Tunze Turbelle Controller 7020 with buttons for Food Timer, Manual, Cloud, Analog, Mode, Wave Search, Min Power, Pulse Duration, Max Power

Obrázek: Podrobný view of the Tunze Turbelle Controller 7020, highlighting its control functions.

The controller allows you to adjust flow rate, set wave patterns, and utilize special functions like the food timer.

5.2. Základní obsluha

Výběr režimu: Use the "Mode" button to cycle through different operating modes (e.g., Constant, Pulse, Wave).
Nastavení průtoku: Use the "+" and "-" buttons to increase or decrease the flow rate in Constant mode, or to adjust pulse intensity/duration in other modes.
Food Timer: Press the "Food Timer" button to temporarily stop the pump for approximately 10 minutes, allowing fish to feed undisturbed. The pump will automatically resume operation after the timer expires.
Wave Search: The "Wave Search" function helps to find the optimal wave frequency for your aquarium.

5.3. WIFI/Cloud Control

The HUB Edition features WIFI/Cloud-based control. Refer to the separate Tunze app manual for detailed instructions on connecting your controller to your home network and managing it remotely via the cloud.

6. Údržba

Regular maintenance ensures optimal performance and longevity of your Turbelle NanoStream pump.

6.1. Čištění čerpadla

Tunze Turbelle NanoStream 6040.005 pump disassembled for cleaning, showing impeller and housing

Image: The Turbelle NanoStream 6040.005 pump, illustrating its components for easy disassembly and cleaning.

Odpojit napájení: Před čištěním vždy odpojte čerpadlo od elektrické zásuvky.
Odstranění z akvária: Opatrně vyjměte čerpadlo z akvária.
Rozebrat: Gently detach the flow deflector and the protective cage. The impeller can then be carefully removed.
Čisté komponenty: Use a soft brush and warm water to remove algae, calcium deposits, and other debris from all pump components, especially the impeller and its housing. For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing.
Znovu sestavit: Reassemble the pump in reverse order, ensuring all parts are correctly seated.
Frekvence: Clean the pump every 1-3 months, depending on the amount of debris and algae in your aquarium.

6.2. Cable Inspection

Periodically inspect the power cable for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact Tunze support.

7. Řešení problémů

Zde jsou některé běžné problémy a jejich řešení:

Problém	Možná příčina	Řešení
Pump not starting or weak flow.	Žádné napájení. Impeller blocked by debris. Vzduch zachycený v čerpadle. Controller settings too low.	Zkontrolujte připojení napájení. Disconnect power, remove pump, clean impeller and housing. Gently shake the pump while submerged to release air. Increase flow setting on the controller.
Pump making unusual noise.	Impeller dirty or damaged. Čerpadlo není zcela ponořené. Vibrations against aquarium glass.	Clean or inspect impeller for damage. Replace if necessary. Ujistěte se, že je čerpadlo zcela ponořené. Adjust pump position or use the included Silence Clamp (if applicable) to reduce vibrations.
Ovladač nereaguje.	Problém s napájením. Porucha ovladače.	Check power connections to the controller. Try resetting the controller by unplugging and replugging the power. If issues persist, contact support.

8. Specifikace

Model	Tunze Turbelle NanoStream 6040.005 HUB Edition
Číslo modelu položky (interní)	6095.005
Velikost akvária	20 to 500 liters (5.3 to 132 USgal.)
Průtok	Approx. 200 to 4,500 l/h (53 to 1,190 USgal./h)
Spotřeba energie	1.5 - 13 W
Napájecí jednotka	100-240V / 50-60Hz
Délka kabelu	3 m (118")
Dimensions (without flow deflector and Magnet Holder)	60 x 43 x 68 mm (2.36 x 1.69 x 2.68 palce)
Průměr výstupu	ø40 mm (1.57”)
Magnet Holder Glass Thickness	Up to 12 mm (1/2”)
Materiál	Plast
Barva	Black/Blue/White
Hmotnost položky	2.75 libry

9. Záruka

The Tunze Turbelle NanoStream 6040.005 HUB Edition comes with a 5-letá záruka from the date of purchase. This warranty covers manufacturing defects and material faults under normal use conditions. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.

10. Podpora a kontaktní informace

For further assistance, technical support, or warranty inquiries, please contact Tunze customer service or visit the official Tunze webmísto.

Online podpora: Visit the Tunze Store on Amazon

Před kontaktováním podpory si prosím připravte číslo modelu produktu (6040.005) a datum zakoupení.

Tunze 6040.005