1. Úvod
Thank you for choosing the FLEXISPOT XL51 Dual OKIN Motor Power Lift Recliner Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new recliner. Please read it thoroughly before use and retain it for future reference.
2. Důležité bezpečnostní informace
- Přečtěte si všechny pokyny: Before operating the recliner, familiarize yourself with all functions and safety warnings.
- Udržujte děti a domácí zvířata v dostatečné vzdálenosti: Ensure children and pets are clear of the chair, especially during operation, to prevent injury.
- Avoid pinching hazards: Keep hands and feet clear of the reclining mechanism to prevent pinching.
- Správné umístění: Place the recliner on a level surface, ensuring adequate clearance around the chair for reclining and lifting functions.
- Hmotnostní limit: Nepřekračujte doporučenou maximální hmotnost 350 liber.
- Power cord safety: Ensure the power cord is not pinched, tangled, or placed in high-traffic areas where it could be damaged. Unplug the chair from the power outlet before cleaning or maintenance.
- Professional repair: Do not attempt to repair the chair yourself. Contact customer support for any issues.
3. Obsah balení
Your FLEXISPOT XL51 recliner is designed for convenient "All-in-One Shipping" and arrives in a single box. Carefully unpack all components and verify against the list below:
- Main Recliner Base (with pre-installed OKIN dual motors)
- Opěradlo
- Levá loketní opěrka
- Pravá loketní opěrka
- Napájecí adaptér
- Napájecí kabel
- Handheld Remote Control (for lift/recline)
- Handheld Massage & Heat Remote Control
- Uživatelská příručka

Image: The FLEXISPOT XL51 Power Lift Recliner Chair, fully assembled.

Image: Various components of the FLEXISPOT XL51, including the power adapter, power cords, and two remote controls.
4. Montážní návod
The FLEXISPOT XL51 is designed for minimal assembly. Please allow 48 hodin for the chair to fully rebound and expand after unboxing, as it is delivered in a compressed state.
- Rozbalte komponenty: Carefully remove all parts from the single shipping box.
- Připevněte područky: Identify the left and right armrests. Align the metal brackets on the armrests with the corresponding slots on the main recliner base. Slide them down firmly until they lock into place. Ensure the zippers on the armrests are properly secured.
- Připevnění opěradla: Align the backrest with the main recliner base. Slide it down onto the metal brackets until it securely locks.
- Připojení kabeláže: Locate the wiring connections at the back of the chair. Connect the color-coded wires (typically red to red, white to white) for the massage and heat functions. Connect the main power cable to the power adapter, and then connect the power adapter to the chair's main power input.
- Připojit: Zapojte napájecí kabel do zásuvky ve zdi.
- Vzdálené umístění: Place the remote controls in the convenient side pockets.
Video: A user demonstrating the unboxing and assembly process of a FlexiSpot lift chair, highlighting the ease of setup.
Video: Oficiální video s produktemasing the FLEXISPOT XL51 Power Lift Recliner, including its assembly and various features.
5. Návod k obsluze
Your FLEXISPOT XL51 recliner comes with two remote controls: one for lift and recline functions, and another for massage and heat.
5.1. Lift and Recline Functions
Use the primary handheld remote control to adjust the chair's position. The German OKIN dual motors allow for independent adjustment of the backrest and footrest.
- Lift to Standing: Press and hold the "Up" arrow button (usually the top button) to gently raise the chair to an almost standing position, assisting you in getting out.
- Sklopit: Press and hold the "Down" arrow button (usually the bottom button) to recline the backrest and raise the footrest. Continue holding to reach a nearly 180° lay-flat position.
- Adjust Backrest Independently: Use the dedicated backrest adjustment buttons (often depicted as a chair with only the back moving) to adjust the backrest angle without moving the footrest.
- Adjust Footrest Independently: Use the dedicated footrest adjustment buttons (often depicted as a chair with only the footrest moving) to adjust the footrest height without moving the backrest.

Image: A detailed diagram illustrating the functions of the lift and recline remote control, including the built-in USB charging port.
Video: A demonstration of the Flexispot Recliner's comfort and elevated features, including recline and lift functions.
5.2. Massage and Heat Functions
Use the secondary handheld remote control to activate and customize the massage and heating features.
- Zapnutí/vypnutí: Stisknutím tlačítka napájení aktivujete nebo deaktivujete masážní a vyhřívací funkce.
- Masážní zóny: Select from 8 massage points targeting the back, lumbar, thighs, and legs.
- Režimy masáže: Choose from various massage modes (e.g., pulse, wave, normal) and adjust intensity levels (low, medium, high).
- Bederní vyhřívání: Aktivujte funkci vyhřívání bederní opěrky pro uklidňující teplo.
- Časovač: Set a timer for the massage and heat functions to automatically turn off after a desired duration.

Image: The FLEXISPOT XL51 recliner showcasing its 8 massage points and lumbar heating feature.
6. Klíčové vlastnosti
- Dual OKIN Motor: Equipped with German OKIN dual motors for independent control of the backrest and footrest, offering infinite reclining positions up to nearly 180 degrees.
- Nadrozměrný design: Features a spacious 24.5-inch wide seat, providing ample room for comfort.
- 8-Point Massage & Lumbar Heating: Eight massage points target the back, lumbar, thighs, and legs, complemented by a lumbar heating function for enhanced relaxation.
- USB nabíjecí porty: Conveniently located USB ports allow you to charge your devices while relaxing.
- Boční kapsy: Integrated side pockets provide storage for remote controls, magazines, or other small items.
- Extended Footrest: The footrest extends to provide full leg support in reclined positions.

Obrázek: Detailní záběr view of the German OKIN dual motors, emphasizing their quality and independent operation for the backrest and footrest.

Image: The FLEXISPOT XL51 recliner shown in its nearly 180-degree lay-flat position, illustrating its full recline and lift assistance features.
7. Údržba a péče
- Čištění: Otřete měkkým, damp hadříkem. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky, které by mohly poškodit umělou kůži.
- Pravidelná kontrola: Pravidelně kontrolujte všechna připojení a pohyblivé části, abyste se ujistili, že jsou bezpečně upevněné a správně fungují.
- Napájecí kabel: Ensure the power cord is not damaged or frayed. If damage occurs, discontinue use and contact customer support.
8. Řešení problémů
If you encounter any issues with your FLEXISPOT XL51 recliner, please refer to the following common solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Chair does not operate (no lift/recline/massage/heat) | Power cord unplugged; loose connections; power outage. | Ensure all power cords are securely plugged into the wall outlet and the chair. Check for tripped circuit breakers. |
| Grinding or clicking noise during operation | Obstruction in mechanism; loose motor component. | Inspect the area around the motors and reclining mechanism for any obstructions. If the noise persists, discontinue use and contact customer support. |
| Chair does not fully recline/lift | Obstruction; incorrect operation. | Ensure there are no objects blocking the chair's movement. Refer to the operating instructions for correct button usage. |
If these solutions do not resolve the issue, please contact FLEXISPOT customer support for further assistance.
9. Specifikace
| Funkce | Detail |
|---|---|
| Značka | FLEXISPOT |
| Název modelu | XL51 |
| Barva | Černý |
| Materiál | Faux Leather (Foam fill) |
| Rozměry produktu | 30"H x 35"Š x 41.5"V |
| Hloubka sedu | 21 palců |
| Doporučená maximální hmotnost | 350 libry |
| Typ motoru | Dual OKIN Motor |
| Počet poloh vleže | Infinite (up to nearly 180°) |
| Speciální funkce | Power Lift, 8-Point Massage, Lumbar Heating, USB Ports |
| Hmotnost položky | 144.5 libry |
| UPC | 840460403023 |

Image: Dimensional drawing of the FLEXISPOT XL51 recliner, showing various measurements and the 350 lbs weight capacity.
10. Záruka a podpora
Společnost FLEXISPOT se zavázala k poskytování vysoce kvalitních produktů a spokojenosti zákazníků.
- Vrácení: You are allowed to return/exchange the furniture within 30 days of when you receive it.
- Zákaznická podpora: For any questions, issues, or warranty claims, please contact FLEXISPOT customer support.
- E-mail: contact@flexispot.com
- Volání: +1(855)585-5618
- online: Navštivte Obchod FLEXISPOT na Amazonu pro více informací a podporu.





