1. Úvod
Thank you for choosing the Scheppach HC63 oil-lubricated air compressor. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new compressor. Please read this manual thoroughly before operating the device and keep it for future reference.
The Scheppach HC63 is a powerful and versatile air compressor designed for a wide range of applications around the home, workshop, or garage, featuring a 50-liter tank, 10 bar working pressure, and a 1500W motor.
2. Bezpečnostní pokyny
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození zařízení:
- Ujistěte se, že kompresor je umístěn na stabilním a rovném povrchu.
- Neprovozujte kompresor za mokra nebo damp podmínky.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses and hearing protection.
- Before any maintenance or cleaning, disconnect the compressor from the power supply and ensure the tank is depressurized.
- Nestříkejte stlačený vzduch na lidi ani zvířata.
- Regularly check all hoses and connections for damage or leaks.
- Udržujte děti a neoprávněné osoby mimo provozní prostor.
3. Komponenty produktu
The Scheppach HC63 compressor comes with the following main components:
Image: The Scheppach HC63 air compressor, showing its blue tank, black motor housing, wheels, and pressure gauges.
- Kompresorová jednotka
- Redukce tlaku
- Rychlé spojení
- Transport Device (Wheels and Handle)
- Oil Bottle (for initial fill/refill)
4. Nastavení a počáteční montáž
Follow these steps for the initial setup of your compressor:
- Rozbalení: Carefully remove all components from the packaging. Check for any transport damage.
- Sestava kola: Attach the wheels to the designated axles on the compressor frame. Secure them with the provided fasteners.
- Sestava rukojeti: Mount the transport handle to the compressor body.
- Náplň oleje: The compressor is shipped without oil. Fill the crankcase with the supplied compressor oil to the indicated level on the dipstick. Do not overfill.
- Umístění: Position the compressor on a firm, level surface in a well-ventilated area. Ensure sufficient clearance around the unit for air circulation.
- Elektrické připojení: Connect the compressor to a suitable grounded power outlet (230 Volt). Ensure the power switch is in the 'OFF' position before plugging in.
Image: The Scheppach HC63 compressor positioned in a workshop, ready for use after assembly.
5. Návod k obsluze
The Scheppach HC63 compressor is designed for various pneumatic applications. Here's how to operate it:
- Zapnutí: Turn the main power switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum operating pressure (10 bar) and then automatically shut off.
- Připojení pneumatického nástroje: Attach your pneumatic tool to the quick coupling.
- Upravte tlak: Use the pressure reducer knob to set the desired working pressure for your tool. Monitor the pressure gauge to ensure accurate setting.
- Operace: Begin using your pneumatic tool. The compressor will automatically restart when the tank pressure drops below a certain level.
- Vypnout: After use, turn the main power switch to 'OFF'.
- Odtlakování nádrže: Open the drain valve at the bottom of the tank to release any remaining air pressure and drain condensed water. This is crucial for tank longevity.
Typické aplikace:
Obrázek: Přamples of applications for the Scheppach HC63 compressor, such as nailing, using an impact wrench, paint spraying, tire inflation, air ratcheting, orbital sanding, and sandblasting.
Image: A user inflating a car tire, demonstrating the compressor's utility for vehicle maintenance.
Image: A user operating a pneumatic nail gun, showcasing the compressor's capability for fastening tasks.
6. Údržba
Regular maintenance ensures the longevity and optimal performance of your Scheppach HC63 compressor:
- Denní: Drain condensed water from the air tank. This prevents rust and corrosion.
- Weekly/After 20 Hours of Operation: Zkontrolujte hladinu oleje a v případě potřeby doplňte.
- Monthly/After 50 Hours of Operation: Clean or replace the air filter. A clogged filter reduces efficiency.
- Every 3 Months/After 100 Hours of Operation: Change the compressor oil. Use only recommended compressor oil.
- Každoročně: Inspect all connections, hoses, and valves for leaks or damage. Tighten loose fittings.
Image: An icon symbolizing low maintenance, indicating the ease of care for the compressor.
7. Řešení problémů
Běžné problémy a jejich možná řešení naleznete v tabulce níže:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Kompresor se nespustí. | No power supply; Thermal overload protection activated. | Check power connection; Allow compressor to cool down. |
| Kompresor běží nepřetržitě. | Air leak in system; Pressure switch faulty. | Check all connections for leaks; Contact service. |
| Nízký výstupní tlak vzduchu. | Clogged air filter; Air leak; Worn piston rings. | Clean/replace air filter; Check for leaks; Contact service. |
| Nadměrný hluk během provozu. | Loose components; Low oil level; Worn bearings. | Tighten all fasteners; Check oil level; Contact service. |
8. Technické specifikace
Key technical data for the Scheppach HC63 Air Compressor:
| Funkce | Hodnota |
|---|---|
| Model | HC63 |
| Vstup napájení | 1500 W |
| svtage | 230 V |
| Objem nádrže | 50 l |
| Max. Pracovní tlak | 10 baru |
| Sací kapacita | 220 l/min |
| Úroveň hluku | 97 dB |
| Typ pohonu | Kabelové |
Image: Visual representation of key specifications: 10 bar maximum working pressure, 220 L/min suction capacity, quick coupling, and 50 L tank volume.
9. Záruka a podpora
Scheppach products are manufactured with high-quality materials and undergo strict quality controls. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions. For technical support or spare parts, please contact your authorized Scheppach dealer or visit the official Scheppach website for service contact information.
