Uživatelská příručka k přepínači Cisco IE-3400-8T2S-E Catalyst IE3400 Rugged Series Network Essential

1. Úvod

This manual provides essential information for the installation, operation, and maintenance of the Cisco IE-3400-8T2S-E Catalyst IE3400 Rugged Series Network Essential Switch. This device is designed for industrial environments, offering robust network connectivity. Please read this manual thoroughly before operating the device.

2. Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste předešli zranění a poškození zařízení:

• Zajistěte správné uzemnění zařízení.
• Před prováděním jakékoli údržby nebo instalace odpojte napájení.
• Operate the switch within the specified environmental conditions (temperature, humidity).
• Only qualified personnel should install and service this equipment.
• Nevystavujte zařízení vlhkosti nebo extrémním teplotám.

3. Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

• Cisco IE-3400-8T2S-E Catalyst IE3400 Rugged Series Network Essential Switch
• Dokumentace (Stručný průvodce, Bezpečnostní informace)
• Mounting hardware (if included with specific model variant)
• Power connector terminal blocks

Pokud některé položky chybí nebo jsou poškozené, ihned kontaktujte svého dodavatele.

4. Fyzický overview

The following diagram illustrates the front panel components of the Cisco IE-3400-8T2S-E switch.

Obrázek 1: Front Panel Layout of the Cisco IE-3400-8T2S-E Switch

4.1. Front Panel Components Description

• USB Ports (1, 2): Two USB ports for connecting external devices or for configuration.
• Port konzoly: An RJ45 console port for local management and initial configuration.
• SFP 1G Ports (1/1, 1/2): Two Small Form-Factor Pluggable (SFP) ports supporting 1 Gigabit Ethernet for fiber optic connections.
• 1G Ethernet Ports (1/3 - 1/10): Eight 1 Gigabit Ethernet RJ45 ports for standard network connections.
• DC Power Inputs (DC-A, DC-R): Redundant DC power input terminals, supporting a voltage range of ±12-48V at 5.0A.
• Zemnící šroub: Terminal for connecting the chassis to earth ground.
• Slot pro SD kartu: Slot for an SD card, typically used for configuration backup or software storage.
• Alarm/Relay Ports (1/9, 1/10): Terminals for connecting external alarm systems or relay controls.
• LED indikátory: Various LEDs indicating power status (DC A/B), system status, link/activity for ports, and alarm status.

5. Nastavení

5.1. Montáž spínače

The IE3400 series switches are designed for industrial environments and typically support DIN rail or wall mounting. Refer to the specific mounting instructions provided with your mounting kit for detailed steps.

5.2. Připojení napájení

1. Před připojením se ujistěte, že je zdroj napájení vypnutý.
2. Connect the DC power cables to the DC-A and/or DC-R terminal blocks, observing polarity (+ and -). The switch supports redundant power inputs.
3. Connect the grounding wire to the grounding screw on the front panel.
4. Once all connections are secure, apply power to the switch. The DC-A and/or DC-B LEDs should illuminate.

5.3. Síťová připojení

• Ethernetové porty: Connect standard RJ45 Ethernet cables from your network devices to the 1G Ethernet ports (1/3 - 1/10).
• SFP porty: Insert compatible SFP transceivers into the SFP 1G ports (1/1, 1/2) and connect fiber optic cables as required.
• Port konzoly: For initial configuration, connect a console cable from your management workstation to the RJ45 console port.

6. Návod k obsluze

6.1. Počáteční zapnutí

Upon applying power, the switch will perform a power-on self-test (POST). The system LED will indicate the boot status. Once the boot process is complete, the switch will be ready for configuration.

6.2. Configuration Access

The switch can be configured via the console port using a terminal emulator or remotely via Telnet/SSH once an IP address is assigned. Refer to the Cisco IOS documentation for detailed configuration commands and procedures.

6.3. LED indikátory

Monitor the LED indicators on the front panel to understand the switch's operational status:

• DC-A/DC-B LEDs: Indicate the status of the primary and redundant DC power inputs.
• Systémová LED: Indicates the overall operational status of the switch (e.g., green for normal operation, amber for warning, red for fault).
• LED diody propojení/aktivitu (na port): Indicate network link status and data activity on each Ethernet and SFP port.
• LED alarmu: Illuminates when a critical system alarm is triggered.

7. Údržba

7.1. Čištění

Pravidelně čistěte vnější povrch spínače měkkým, suchým hadříkem. Nepoužívejte tekuté ani aerosolové čisticí prostředky. Ujistěte se, že ventilační otvory jsou bez prachu a nečistot.

7.2. Aktualizace firmwaru

Regularly check the Cisco support website for the latest firmware updates. Applying updates can improve performance, add features, and address security vulnerabilities. Follow Cisco's official procedures for firmware upgrades.

7.3. Ohledy na životní prostředí

Ensure the switch operates within its specified temperature and humidity ranges. Proper airflow around the device is crucial for heat dissipation.

8. Řešení problémů

Tato část obsahuje základní kroky pro řešení běžných problémů.

8.1. Bez napájení

• Verify that the power source is active and the power cables are securely connected to the DC-A/DC-R terminals.
• Check the DC-A/DC-B LEDs. If they are off, there is no power or a power supply issue.

8.2. No Network Link

• Ensure Ethernet or fiber optic cables are properly connected to both the switch port and the connected device.
• Check the Link/Activity LED for the specific port. If it is off, there is no link.
• Ověřte, zda je připojené zařízení zapnuté a funguje správně.

8.3. System Alarm

• If the Alarm LED is illuminated, consult the Cisco IOS documentation for specific alarm codes and their meanings.
• Check system logs via the console or network management interface for detailed error messages.

9. Specifikace

10. Záruka a podpora

This product is offered as an Amazon Renewed item. Warranty and return policies are typically managed by the reseller (Amazon Renewed) for a specified period. Please refer to your purchase documentation or contact Amazon Renewed support for details regarding your specific warranty coverage.

For technical documentation, software downloads, and advanced support for the Cisco IE-3400-8T2S-E switch, please visit the official Cisco support website and search for your specific model.