GONEO 7kW 8A-32A Single-Phase OCPP Charging Station User Manual

1. Bezpečnostní informace

Please read this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

• Profesionální instalace: Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy.
• Odpojení napájení: Always disconnect power to the circuit breaker before performing any installation, maintenance, or wiring.
• Podmínky prostředí: Do not operate the charging station outside its specified temperature range (-30°C to 55°C). Ensure the installation location is suitable for its IP65 (waterproof, dustproof) and IK10 (impact protection) ratings.
• Integrita kabelu: Do not use the charging station if the charging cable or connector is damaged.
• Větrání: Ensure adequate ventilation around the charging station.

2. Co je v krabici

Opatrně vybalte krabici a ujistěte se, že jsou v ní všechny položky:

• GONEO 7kW Charging Station
• Wall-mounting accessories (screws, expansion tubes)
• Uživatelská příručka
• Cable Holder (Empty Socket)
• RFID karty (2 kusů)
• 485 Communication Wire (for specific configurations)

Image: Contents of the product box, showing the charging station, wall-mounting accessories, user manual, cable holder, and RFID cards.

3. Instalace

3.1 Fyzická montáž

Pro bezpečné upevnění na zeď postupujte podle těchto kroků:

1. Vyberte umístění: Choose a flat, vertical surface capable of supporting the charging station's weight. Ensure sufficient space for cable management and operation.
2. Označte vrtné body: Use the provided wall bracket as a template to mark the drilling points on the wall.
3. Vrtací otvory: Drill holes at the marked points and insert the expansion tubes.
4. Montážní držák: Připevněte nástěnný držák ke zdi pomocí dodaných šroubů.
5. Připojení nabíjecí stanice: Carefully hang the charging station onto the mounted bracket.

Image: Step-by-step guide for physical installation, illustrating drilling, bracket attachment, and unit placement.

3.2 Připojení kabeláže

The charging station features a convenient front wiring port for easy installation and maintenance.

1. Přístupový prostor pro kabeláž: Use a screwdriver to remove the security screw and open the decorative cover at the bottom of the unit. Then, remove all fixing screws from the wiring cover to access the internal terminals.
2. Připojení hlavního napájení: Route the main power cables (Live, Neutral, Earth) through the bottom cable hole and connect them securely to the corresponding terminal blocks (L, N, PE).
3. Connect 485 Communication Wire (if applicable): If using 485 communication, prepare the 485 communication wire (485A and 485B). Connect these wires to the provided wiring terminal and then insert the terminal into the designated wire harness inside the unit. Ensure correct polarity (485A on the right side).
4. Bezpečné kryty: After all connections are made, reinstall the wiring cover and then the decorative cover, ensuring all screws are tightened.

Image: The front wiring port of the charging station, showing the internal terminal blocks for power connections.

3.3 Instalace SIM karty

To enable 4G connectivity, install a SIM card:

1. Access SIM Slot: With the wiring compartment open, locate the SIM card holder. Gently catch the bottom of the SIM card holder and pull it out.
2. Vložte SIM kartu: Place your activated SIM card into the holder.
3. Reinsert Holder: Carefully insert the SIM card holder back into the SIM slot until it clicks into place.
4. Zavřít obaly: Reinstall the wiring cover and decorative cover.

4. Provoz

4.1 Zapnutí

Once properly installed and connected to power, the charging station will automatically power on. The 4.3-inch TFT screen will display the startup sequence and then show the standby interface.

4.2 Proces nabíjení

The GONEO charging station is compatible with all Type 2 socket electric vehicles.

1. Connect Vehicle: Plug the Type 2 charging connector firmly into your electric vehicle's charging port.
2. Start Charging (RFID): If RFID authentication is enabled, tap your RFID card on the designated area of the charging station to initiate the charging session.
3. Stav monitoru: The TFT screen will display real-time charging information.
4. Stop Charging (RFID): To end the session, tap your RFID card again. Disconnect the cable from your vehicle.

Image: Compatibility with Type 2 electric vehicles, showing various compatible car brands.

Image: Using an RFID card to authorize and control charging sessions.

4.3 Ovládání aplikace

The GONEO app provides advanced control and monitoring features for your charging station.

1. Stáhnout aplikaci: Download the 'GONEO' app from the Android Play Store or iOS App Store.
2. Connect Station: Follow the in-app instructions to connect your charging station via 4G, WiFi, or Bluetooth.
3. Vlastnosti: The app allows for remote start/stop, setting reservation modes, scheduling charging times, calculating electricity consumption, and monitoring the charging status in real-time.

Obrázek: Overview of the GONEO app's remote control functionalities.

Image: Scheduled charging feature, allowing users to optimize charging times for cost savings.

Image: The GONEO app available for both Android and iOS platforms.

4.4 Zobrazení informací

The 4.3-inch TFT color screen provides clear and bright real-time charging data, including:

• Nabíjecí proud (Ampvymazat)
• svtage
• Výkon (kW)
• Nabitá energie (kWh)
• Doba nabíjení
• Connectivity Status (WiFi, Bluetooth, 4G, Ethernet)

Image: The 4.3-inch TFT LCD screen showing detailed charging parameters.

5. Údržba

5.1 Čištění

Regularly clean the exterior of the charging station with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit casing a obrazovka.

5.2 Podmínky prostředí

The GONEO charging station is designed for durability and can withstand various environmental conditions:

• Stupeň krytí IP65: Provides protection against dust ingress and low-pressure water jets from any direction, making it suitable for outdoor use.
• IK10 Rating: Offers high resistance against mechanical impacts.
• Rozsah teplot: Operates effectively in temperatures ranging from -30°C to 55°C.

Image: The charging station's robust design, suitable for various weather conditions with IP65 and IK10 ratings.

Image: The charging station's ability to function reliably across a wide range of temperatures, from -30°C to 55°C.

6. Řešení problémů

If you encounter issues with your GONEO charging station, consider the following:

• Bez napájení: Check the circuit breaker and ensure all power connections are secure.
• Nabíjení se nezačíná: Verify the charging cable is properly connected to both the station and the vehicle. Ensure RFID authentication is correctly performed if enabled.
• Problémy s připojením aplikace: Check your 4G, WiFi, or Bluetooth connection. Ensure the charging station is within range and has a stable network signal.
• Kódy chyb: The charging station's display or the GONEO app may show specific error codes. Refer to the app's help section or the full user manual for detailed explanations and solutions for each code.
• Pomalé nabíjení: Confirm the current setting (8A-32A) is appropriate for your vehicle and electrical supply.

For persistent problems or issues not covered here, please contact GONEO customer support.

7. Specifikace

Image: Certifications for the GONEO charging station, ensuring safety and quality standards.

8. Záruka a podpora

GONEO is committed to providing high-quality products and excellent customer service. With 30 years of experience in electrical appliance research and manufacturing, we have a robust after-sales team ready to assist you.

For any inquiries, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official GONEO webmísto.