Návod k obsluze panelového světla Amico 2x4 LED Troffer

1. Konec produktuview

This manual provides instructions for the Amico 2x4 LED Troffer Panel Light. This fixture is designed for drop ceilings and features adjustable color temperature (CCT) and wattage settings, along with 0-10V dimming capabilities. It is suitable for various indoor commercial and institutional applications.

Image 1.1: Four Amico 2x4 LED Troffer Panel Lights, illustrating the product's appearance.

2. Bezpečnostní informace

Před instalací a použitím si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.

• Elektrická bezpečnost: Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or maintenance.
• Základy: The fixture must be properly grounded to prevent potential electrical shock.
• svtage: Ověřte, že zásoba objtagje kompatibilní s provozním objemem svítidlatage (10 Volts DC for control, consult product label for main power).
• Pouze pro vnitřní použití: Tento výrobek je určen pro vnitřní použití v suchých prostorách. Nevystavujte vlhkosti ani extrémním teplotám.
• Zacházení: S přístrojem zacházejte opatrně, abyste předešli poškození jeho součástí.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Amico 2x4 LED Troffer Panel Light(s)
• Montážní hardware

4. Pokyny k instalaci

The Amico 2x4 LED Troffer Panel Light is designed for easy installation in standard drop ceilings using its built-in clips and included mounting hardware.

4.1 Kroky před instalací

1. Odpojení napájení: Před zahájením jakýchkoli elektrických prací vypněte napájení jističem.
2. Kontrola přípravku: Unpack the fixture and inspect it for any damage. Do not install if damaged.
3. Prepare Ceiling Opening: Ensure the ceiling grid opening is appropriate for a 2x4 (approximately 23.74" x 47.76") panel light.

4.2 Zapojení

1. Connect the AC power supply wires to the fixture's input wires (Line, Neutral, Ground) according to local electrical codes.
2. If using 0-10V dimming, connect the dimming wires (purple and gray) from the fixture to the compatible 0-10V dimmer switch. Ensure polarity is correct.
3. Secure all wire connections with appropriate connectors.

4.3 Montáž

1. Carefully lift the LED panel into the ceiling grid opening.
2. Engage the built-in clips on the sides of the fixture with the ceiling grid rails to secure the panel in place.
3. For added security, use the provided mounting hardware to attach the fixture to the building structure, if required by local codes or desired.

Image 4.1: Product dimensions (47.76"L x 23.74"W x 1.91"H) for installation planning.

5. Návod k obsluze

The Amico LED Troffer Panel Light offers adjustable wattage and color temperature settings to customize your lighting environment.

5.1 Úprava Watutage (Brightness)

The fixture features a toggle switch on the back to select the desired wattage, which directly affects the brightness (lumens). Choose from 25W, 30W, 35W, 40W, or 50W.

Image 5.1: Location of the 5-position power toggle switch for wattage seřízení.

Image 5.2: Visual representation of brightness levels at 25W, 30W, 35W, 40W, and 50W.

5.2 Nastavení teploty barev (CCT)

A separate toggle switch on the back of the fixture allows you to select the desired color temperature: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight White).

Image 5.3: Location of the 4-position CCT toggle switch for color temperature adjustment.

Obrázek 5.4: Příkladamples of different color temperatures (3000K, 3500K, 4000K, 5000K) in various environments.

5.3 0-10V Dimming

The fixture supports 0-10V dimming, allowing for smooth brightness adjustment from 0% to 100% when connected to a compatible 0-10V dimmer switch.

Image 5.5: Illustration of 0-10V dimming capability in a conference room setting.

6. Údržba

The Amico LED Troffer Panel Light requires minimal maintenance.

• Čištění: Před čištěním se ujistěte, že je zařízení vypnuté. Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Žádné díly opravitelné uživatelem: The LED chips and driver are integrated and not user-serviceable. Attempting to open or modify the fixture will void the warranty.
• Životnost: The fixture is designed for over 50,000 hours of continuous operation.

Image 6.1: Internal components of the LED Troffer Panel Light, highlighting its durable design.

7. Řešení problémů

If you encounter issues with your Amico LED Troffer Panel Light, refer to the following common troubleshooting steps:

Pokud tyto kroky problém nevyřeší, kontaktujte zákaznickou podporu.

8. Specifikace

9. Záruka a podpora

The Amico 2x4 LED Troffer Panel Light comes with a limited warranty. For specific warranty terms and conditions, please refer to the product packaging or contact Amico customer service.

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Amico customer support through their official channels.