Uživatelská příručka k simulátoru MOZA R12 Direct Drive Racing Wheelbase

1. Úvod

The MOZA R12 Direct Drive Sim Racing Wheelbase is a high-performance servo base designed to deliver an immersive and realistic force feedback experience for PC video games. With its 12 Nm direct drive torque, advanced motor design, and robust construction, the R12 provides precise and detailed feedback, replicating the feel of real-world racing. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MOZA R12 wheelbase.

Obrázek 1.1: Přední strana view of the MOZA R12 Direct Drive Sim Racing Wheelbase, showcasinjeho kompaktní a robustní konstrukce.

2. Klíčové vlastnosti

• 12Nm Direct Drive Torque: Provides stable and realistic torque output, replicating steering force from real cars.
• Direct Drive Servo Motor: Features a slanted-pole design for ultra-low torque ripple and a wide high-torque speed range.
• Ultra-low FFB Latency & Steering Response: Achieved through a 280MHz processor chip and optimized algorithms for precise control.
• Industrial Conductive Slip Ring: Automotive-grade slip ring with over 5 million revolutions lifespan, ensuring high stability and durability.
• Aviation-grade Aluminum Construction: Entire housing is constructed from durable aviation-grade aluminum alloy with automotive-grade painting and laser etching.
• Inteligentní systém řízení teploty: Continuously monitors motor and electronic component temperature for stable performance.
• NexGen 3.0 FFB Algorithm: Enhances realism by eliminating swaying during straight-line driving and refining vehicle inertia.
• Kompaktní design: Integrated motor design with a standard 4-hole bottom mount pattern, compatible with various rigs and desk clamps.
• Cloud-based Mobile App Control: Allows for convenient adjustment and management of settings.
• MOZA Pit House Control Software: Dedicated PC software for comprehensive configuration and tuning.

Figure 2.1: Visual representation of the MOZA R12's key features, including 12Nm DD Power, Direct Drive Servo Motor, and Ultra-low FFB Latency.

3. Průvodce nastavením

3.1 Vybalení a kontrola komponent

Carefully unpack all components from the box. Verify that all items listed in the packing list are present and undamaged. The typical package contents include:

• MOZA R12 Direct Drive Wheelbase
• Napájecí jednotka
• USB kabel
• Mounting Screws and Tools (if included)

3.2 Fyzická instalace

The MOZA R12 wheelbase can be mounted to a sim racing rig, cockpit, or a desk using a compatible desk clamp (sold separately). Ensure the mounting surface is stable and secure enough to handle the forces generated by the wheelbase.

1. Rig/Cockpit Mounting: Align the 4-hole bottom mount pattern of the R12 wheelbase with the mounting plate on your rig. Secure the wheelbase using appropriate screws (M6 or M8, depending on your rig) and washers. Tighten securely but do not overtighten.
2. Stůl Clamp Montáž: If using a desk clamp, připojte třamp to your desk and then secure the R12 wheelbase to the clamp according to the clamp's instructions. Ensure the clamp is firmly attached to prevent movement during use.

Figure 3.1: The MOZA R12 wheelbase shown mounted on a sim racing rig, demonstrating its compact design and compatibility with standard mounting patterns.

3.3 Připojení

Connect the wheelbase to your PC and power source as follows:

• Připojení napájení: Connect the power supply unit to the "INPUT" port on the rear of the R12 wheelbase. Plug the power supply into a suitable wall outlet.
• USB připojení: Connect one end of the provided USB cable to the USB port on the rear of the R12 wheelbase and the other end to an available USB port on your PC.
• Periferní připojení: If you have MOZA pedals, shifters, or other peripherals, connect them to the appropriate ports (e.g., "PEDAL", "SHIFTER") on the rear of the wheelbase. Refer to the peripheral's manual for specific connection details.

Obrázek 3.2: Zadní view of the MOZA R12 wheelbase, highlighting the various input and peripheral connection ports.

3.4 Instalace softwaru

To fully utilize your MOZA R12 wheelbase, you need to install the MOZA Pit House software and the latest drivers.

1. Download MOZA Pit House: Visit the official MOZA Racing webweb (mozaracing.com/ke stažení) and download the latest version of the MOZA Pit House software.
2. Instalace softwaru: Spusťte stažený instalační program a dokončete instalaci podle pokynů na obrazovce.
3. Instalace ovladače: MOZA Pit House will automatically detect and prompt you to install any necessary drivers for your R12 wheelbase. Follow the prompts to ensure all drivers are up to date.
4. Aktualizace firmware: After installation, check for any available firmware updates for your R12 wheelbase within the MOZA Pit House software. It is recommended to keep your firmware updated for optimal performance and compatibility.

4. Návod k obsluze

4.1 Zapnutí a inicializace

Once all connections are made and software is installed:

1. Ensure the wheelbase is securely mounted.
2. Turn on the power switch on the rear of the R12 wheelbase. The wheelbase will perform a brief calibration sequence.
3. Launch the MOZA Pit House software on your PC. The software should detect your R12 wheelbase.

4.2 Používání softwaru MOZA Pit House

MOZA Pit House is your central hub for configuring and fine-tuning your R12 wheelbase. It allows you to:

• Adjust Force Feedback (FFB) strength and various FFB effects.
• Set steering angle and linearity.
• Calibrate connected peripherals (pedals, shifters).
• Update firmware for the wheelbase and connected devices.
• Save and load custom profilepro různé hry nebo styly jízdy.
• Monitor device status and temperature.

Explore the various tabs and settings within the software to customize your racing experience. Detailed explanations for each setting can often be found within the software's interface or the MOZA online knowledge base.

4.3 In-Game Setup

After configuring your wheelbase in MOZA Pit House, you will need to set it up within your chosen racing simulator game. Most games will automatically detect the MOZA R12 as a controller. You may need to:

• Select the MOZA R12 as your primary steering device.
• Map steering, throttle, brake, and clutch inputs.
• Adjust in-game Force Feedback settings. It is often recommended to start with lower FFB settings in-game and gradually increase them to avoid clipping or excessive forces.

Figure 4.1: A typical sim racing setup featuring the MOZA R12 wheelbase, demonstrating its integration into a complete racing simulation environment.

5. Údržba

Proper maintenance ensures the longevity and optimal performance of your MOZA R12 wheelbase.

• Čištění: Regularly wipe down the exterior of the wheelbase with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish. Ensure no dust or debris accumulates in the ventilation openings.
• Aktualizace softwaru a firmwaru: Periodically check the MOZA Pit House software for new software versions and firmware updates. These updates often include performance improvements, bug fixes, and new features.
• Správa kabelů: Ensure all cables are neatly routed and not under tension or pinched, which can lead to damage over time.
• Skladování: Pokud se rozvor delší dobu nepoužívá, skladujte jej v čistém a suchém prostředí, mimo dosah přímého slunečního záření a extrémních teplot.

6. Řešení problémů

This section addresses common issues you might encounter with your MOZA R12 wheelbase.

6.1 Žádné napájení / Nezapíná se

• Ensure the power cable is securely connected to both the wheelbase and the wall outlet.
• Verify the power switch on the rear of the wheelbase is in the "ON" position.
• Zkontrolujte, zda zásuvka funguje správně, zapojením jiného zařízení.
• Zkontrolujte napájecí jednotku, zda není viditelně poškozená.

6.2 Wheelbase Not Detected by PC / MOZA Pit House

• Ensure the USB cable is securely connected to both the wheelbase and your PC.
• Try connecting the USB cable to a different USB port on your PC (preferably a USB 3.0 port).
• Restart your PC and the wheelbase.
• Reinstall the MOZA Pit House software and drivers.
• Check Device Manager in Windows to see if the wheelbase is recognized (even with an error).

6.3 No Force Feedback or Weak FFB

• Verify that the wheelbase is powered on and connected to the PC.
• Check FFB settings in MOZA Pit House; ensure FFB strength is not set to zero or very low.
• Check in-game FFB settings; ensure FFB is enabled and strength is adequate.
• Ensure the game is properly configured to use the MOZA R12.
• Update wheelbase firmware and MOZA Pit House software to the latest versions.

6.4 Přehřátí

• Ensure the wheelbase has adequate ventilation and its cooling fins are not obstructed.
• Reduce the overall FFB strength in MOZA Pit House or in-game settings if overheating occurs frequently.
• Allow the wheelbase to cool down if it becomes excessively hot. The intelligent temperature control system should manage this, but prolonged high-intensity use in a poor environment can still lead to high temperatures.

7. Specifikace

8. Záruka a podpora

MOZA products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty information provided with your product packaging or visit the official MOZA Racing webmísto.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact MOZA Racing customer support through their official webmísto:

• Oficiální závod MOZA Webmísto: mozaracing.com/support
• MOZA Store on Amazon: Visit the MOZA Store

Please have your product model number (AZRS048) and purchase information ready when contacting support.