BOYA BY-V4

Uživatelská příručka bezdrátového mikrofonního systému BOYA BY-V4

Model: BY-V4 (3.5mm Jack)

1. Úvod

The BOYA BY-V4 is a compact and versatile 4-channel wireless microphone system designed for use with cameras, DSLRs, and camcorders. It provides a reliable audio solution for various recording scenarios, offering features like 2.4GHz wireless transmission, intelligent noise cancellation, and extended battery life. This manual provides detailed instructions for setting up, operating, and maintaining your BY-V4 system.

BOYA BY-V4 Wireless Microphone System with four transmitters and one receiver in a charging case.

Image 1.1: The BOYA BY-V4 wireless microphone system, showcasing the charging case, four transmitters, and one receiver.

2. Co je v krabici

Ověřte, zda jsou v balení přítomny všechny komponenty:

Contents of the BOYA BY-V4 package including transmitters, receiver, charging case, cables, windscreens, and stickers.

Image 2.1: All components included in the BOYA BY-V4 wireless microphone system package.

3. Konec produktuview

The BY-V4 system consists of four transmitters (TX), one receiver (RX), and a charging case. Each component is designed for ease of use and portability.

3.1. Transmitters (BY-V4-TX)

Close-up of a BOYA BY-V4 transmitter showing its omnidirectional microphone and 360-degree rotation capability.

Image 3.1: Detail of the omnidirectional microphone and rotatable clip on a BY-V4 transmitter.

3.2. Receiver (BY-V4-RXU)

3.3. Charging Case (BY-V4-Case)

BOYA BY-V4 wireless microphone system with charging case open, showing two transmitters inside and two outside, along with the receiver.

Image 3.2: The BY-V4 system components, including the charging case, transmitters, and receiver.

4. Pokyny k nastavení

Follow these steps to set up your BOYA BY-V4 wireless microphone system:

  1. Nabití systému: Before first use, ensure the charging case, transmitters, and receiver are fully charged. Place all components into the charging case and connect the case to a power source using the provided USB-A to USB-C cable. The indicators will show charging status.
  2. Připojte přijímač:
    • Locate the 3.5mm audio input jack on your camera, DSLR, or camcorder.
    • Insert the 3.5mm TRS connector of the BY-V4-RXU receiver into this jack.
  3. Power On Transmitters and Receiver:
    • Remove the transmitters and receiver from the charging case. They will automatically power on and attempt to pair.
    • Alternatively, press and hold the power button on each unit to manually power them on.
  4. Párování: The transmitters and receiver are pre-paired at the factory. If re-pairing is needed, ensure both are powered on. Use the pairing pin to press the pairing button on the receiver, then press the pairing button on the transmitter(s). The indicator lights will show successful pairing.
  5. Attach Transmitters: Clip the transmitters onto the speaker's clothing, ensuring the microphone faces the mouth for optimal sound capture. The 360° rotatable clip allows for flexible positioning.
BOYA BY-V4 receiver connected to a DSLR camera, demonstrating long-range transmission.

Image 4.1: The BY-V4 receiver connected to a camera, illustrating its use in a recording setup.

5. Návod k obsluze

5.1. Základní nahrávání

Once the system is set up and paired, you can begin recording. The audio from the transmitters will be wirelessly sent to the receiver, which then feeds into your recording device.

5.2. Potlačení hluku

The BY-V4 transmitters feature an intelligent noise cancellation function to reduce ambient background noise.

BOYA BY-V4 transmitter with a visual representation of noise cancellation before and after activation.

Image 5.1: Illustration of the one-click noise cancellation feature on the BY-V4 transmitter.

5.3. 2TX / 4TX Mode Switching

The receiver supports switching between 2-transmitter (2TX) and 4-transmitter (4TX) recording modes. This allows you to choose how many microphones are actively sending audio to the receiver.

Diagram showing the 2TX/4TX switch on the BOYA BY-V4 receiver and its effect on the number of active transmitters.

Image 5.2: The 2TX/4TX mode switch on the receiver, allowing selection between two or four active transmitters.

6. Životnost baterie a nabíjení

The BY-V4 system is designed for extended use with its integrated charging case.

Graphic illustrating the 12-hour extended duration of the BOYA BY-V4 system with its charging case.

Obrázek 6.1: Konecview of the BY-V4's battery performance, including charging time and total usage duration.

7. Kompatibilita

The BOYA BY-V4 (3.5mm Jack) system is designed for specific devices:

Diagram showing compatible devices for the BOYA BY-V4 (3.5mm Jack) system, including cameras, camcorders, DSLRs, and voice recorders, and explicitly stating incompatibility with mobile devices and computers.

Image 7.1: Visual guide to the compatibility of the BY-V4 (3.5mm Jack) receiver with various recording devices.

8. Specifikace

Key technical specifications for the BOYA BY-V4 Wireless Microphone System:

FunkceSpecifikace
Technologie připojeníBezdrátové 2.4 GHz
Typ konektoruZásuvka 3.5 mm
Polární vzorVšesměrový
Počet kanálů4
Odstup signálu od šumu80 dB
Frekvenční odezva20 Hz - 20 kHz
Formát zvuku48kHz/16bit
Max SPL120 dB
Dosah převodovkyAž 200 metrů (650 stop) v otevřeném prostředí
Hmotnost vysílače10.5 gramů
Zdroj napájeníNapájení z baterie
Rozměry položky (D x Š x V)6.1 x 2.2 x 3.4 palce (nabíjecí pouzdro)
Graphic illustrating the 48kHz/16bit audio quality of the BOYA BY-V4 system.

Image 8.1: Representation of the high-fidelity audio capture capabilities of the BY-V4.

9. Údržba

Proper maintenance ensures the longevity and optimal performance of your BY-V4 system:

10. Řešení problémů

If you encounter issues with your BOYA BY-V4 system, refer to the following common problems and solutions:

ProblémMožná příčina / řešení
Žádný zvuk / nízká hlasitost
  • Ensure transmitters and receiver are powered on and paired.
  • Check battery levels of all components.
  • Verify the receiver is fully inserted into the camera's 3.5mm audio jack.
  • Adjust audio input levels on your camera/recorder.
  • Confirm the camera's audio input is set to external microphone.
Interference / Poor Audio Quality
  • Move closer to the receiver to reduce transmission distance.
  • Avoid obstacles between transmitter and receiver.
  • Ujistěte se, že v blízkosti nezpůsobují rušení žádná jiná zařízení pracující na frekvenci 2.4 GHz.
  • Aktivujte funkci potlačení hluku na vysílači.
  • Check if the foam windscreen is properly attached and clean.
Transmitters Not Pairing
  • Ujistěte se, že jsou vysílače i přijímač plně nabité a zapnuté.
  • Initiate manual pairing using the pairing pin as described in Section 4.
  • Move units closer together during pairing.
Krátká životnost baterie
  • Ensure all components and the charging case are fully charged before use.
  • Battery performance can degrade over time; consider replacing if significantly reduced.
Cannot Switch 2TX/4TX Mode
  • Ensure the receiver is connected to a camera/recorder via the 3.5mm audio jack. This function is only active when connected.

11. Záruka a podpora

BOYA products are designed for reliability and performance. For warranty information and technical support, please refer to the official BOYA webstránky nebo se obraťte na svého místního distributora.

You can visit the official BOYA store for more information: BOYA Official Store

Související dokumenty - BY-V4

Předview BOYA BY-V4 Series 4-Channel Mini Wireless Microphone System User Manual
Comprehensive user manual for the BOYA BY-V4 series of 4-channel mini wireless microphone systems, including BY-V4, BY-V4U, and BY-V4D models. Covers features, product structure, setup, pairing, troubleshooting, and specifications for high-quality audio recording.
Předview Bezdrátový mikrofonní systém BOYA BY-WM4: Návod k obsluze a uživatelská příručka
Komplexní návod k obsluze bezdrátového mikrofonního systému BOYA BY-WM4. Zjistěte více o nastavení, funkcích, specifikacích, bezpečnosti a používání chytrých telefonů, fotoaparátů, videokamer a počítačů.
Předview Návod k použití bezdrátového mikrofonního systému BOYA BY-WM6S UHF
Komplexní návod k obsluze bezdrátového mikrofonního systému BOYA BY-WM6S UHF, který zahrnuje funkce, nastavení, obsluhu, řešení problémů a specifikace pro profesionální nahrávání zvuku.
Předview Uživatelská příručka bezdrátového ultramini mikrofonu BOYA mini
Komplexní uživatelská příručka pro bezdrátový ultra-mini mikrofonní systém BOYA mini, která zahrnuje nastavení, funkce, ovládání, řešení problémů a specifikace pro různé modely včetně BOYA mini-12 až BOYA mini-23.
Předview Uživatelská příručka k bezdrátovému mikrofonu BOYA mini 2.4 GHz Ultra-Mini
Uživatelská příručka k bezdrátovému mikrofonnímu systému BOYA mini 2.4 GHz Ultra-Mini. Zahrnuje obecný úvod, funkce, strukturu vysílače a přijímače (Lightning, USB-C, 3.5mm TRS), obsluhu nabíjecího pouzdra, pokyny k použití různých balení, řešení problémů, podrobné specifikace a seznam součástí balení.
Předview Digitální klopový mikrofon BOYA BY-DM2 pro zařízení Android - Uživatelská příručka
Naučte se, jak používat digitální klopový mikrofon BOYA BY-DM2 se zařízeními Android. Tato příručka popisuje nastavení, ovládání, specifikace a kompatibilitu pro vysoce kvalitní nahrávání zvuku.