Floordirekt Lakota 200x120x60cm

Floordirekt Lakota Heavy Duty Shelving Unit

Model: Lakota 200x120x60cm (Gray)

Zavedení

The Floordirekt Lakota Heavy Duty Shelving Unit is typically sold as a set of two, designed for robust storage solutions in various environments, including garages, workshops, and commercial spaces. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of each individual shelving unit.

  • Each shelving unit offers a total load capacity of 875 kg, with individual shelves supporting up to 175 kg.
  • Constructed from high-quality steel sheet and equipped with 4mm thick MDF panels for extreme robustness.
  • Features an intelligent plug-in system for quick and effortless tool-free assembly.
  • Shelves are adjustable in 5 cm increments, allowing for flexible configuration, including conversion into workbenches.

Bezpečnostní pokyny

Před montáží a použitím si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést ke zranění nebo poškození výrobku.

  • Nosnost: Do not exceed the maximum load capacity of 175 kg per shelf or 875 kg per unit. Distribute weight evenly across shelves.
  • Shromáždění: Assemble the unit on a flat, stable surface. Ensure all components are securely connected before loading.
  • Stabilita: For optimal stability and safety, especially with heavy loads or in areas with potential movement, it is highly recommended to anchor the shelving unit to a wall. Wall mounting hardware (screws and anchors) may be included or purchased separately.
  • Děti a domácí mazlíčci: Keep children and pets away from the shelving unit during assembly and ensure it is stable before allowing access to the area.
  • Ostré hrany: While designed with safety in mind, exercise caution during assembly to avoid contact with any potential sharp edges.
  • Prostředí: Use the shelving unit in a dry, stable environment. Avoid exposure to excessive moisture or extreme temperatures.

Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny.

PoložkaQuantity (per unit)Popis
Ocelové sloupky8Vertical support beams for the shelving structure.
Steel Crossbars (Long)10Horizontal supports for the longer side of the shelves.
Steel Crossbars (Short)10Horizontal supports for the shorter side of the shelves.
MDF Shelf Panels (4mm thick)5The actual shelf surfaces.
Foot Protection Caps4Protective caps for the bottom of the upright posts.
Konektory4Used to connect upper and lower sections of upright posts.

Note: This product is a set of 2 shelving units. The quantities listed above are per single unit.

Nastavení a montáž

The Floordirekt Lakota shelving unit features a tool-free plug-in system for easy assembly. It is recommended to have two people for assembly.

  1. Připravte si komponenty: Unpack all components and verify against the package contents list. Ensure you have a clear, flat workspace.
  2. Sestavte svislé sloupky: Each upright post consists of two sections. Connect the upper and lower sections using the provided connectors. Ensure they are firmly seated.
  3. Attach Foot Protection Caps: Place the foot protection caps onto the bottom of the assembled upright posts.
  4. Konstrukce základního rámu: Begin by connecting two long crossbars and two short crossbars to the bottom of four upright posts to form the base frame. The plug-in system allows for easy insertion into the slots on the upright posts. Use a rubber mallet (not included) if needed to gently tap components into place for a secure fit.
  5. Instalace první police: Place one MDF panel onto the assembled base frame.
  6. Add Intermediate Frames: Repeat step 4 for the desired number of shelves, inserting crossbars at your chosen height. The shelves are adjustable in 5 cm increments. Ensure all crossbars are level and securely seated.
  7. Nainstalujte zbývající police: Place the remaining MDF panels onto their respective crossbar frames.
  8. Montáž na zeď (doporučeno): For enhanced stability, especially with heavy loads, secure the shelving unit to a wall using appropriate screws and anchors (see image below). Mark the drilling points on the wall, drill holes, insert anchors, and fasten the unit.
Floordirekt Lakota Heavy Duty Shelving Unit, highlighting easy assembly, ample storage, adjustable shelves, reinforced crossbars, and foot protection caps.

Obrázek 1: Přesview of the Floordirekt Lakota Heavy Duty Shelving Unit, emphasizing its easy, screw-free plug-in assembly system, ample storage, adjustable shelves, reinforced crossbars, and foot protection caps.

Illustration of the practical plug-in system and the shelving unit configured as a workbench, demonstrating its versatility.

Obrázek 2: Detailní view of the practical plug-in system for assembly and an example of the unit configured as a workbench, showcasing its versatile usage options.

Image showing the possibility of wall mounting the shelving unit, with included screws and anchors.

Figure 3: Demonstration of optional wall mounting for increased stability, illustrating the use of screws and anchors to secure the unit to a wall.

Návod k obsluze

Once assembled, the Floordirekt Lakota shelving unit is ready for use.

  • Načítání: Distribute items evenly across the shelves. Avoid concentrating heavy loads in one small area.
  • Hmotnostní limity: Adhere strictly to the maximum weight capacity of 175 kg per shelf and 875 kg per unit. Overloading can compromise stability and lead to structural failure.
  • Seřizovací police: To adjust shelf height, unload the shelf, carefully detach the crossbars from the upright posts, reposition them to the desired slots (in 5 cm increments), and re-secure the MDF panel.
  • Konfigurace pracovního stolu: The unit can be split into two smaller, lower units to function as workbenches. To do this, separate the upper and lower sections of the upright posts and assemble two independent, shorter shelving units.
Shelving unit filled with files, illustrating its storage capacity for up to 55 binders.

Figure 4: The shelving unit effectively storing numerous binders, demonstrating its high capacity for organized storage.

Údržba

Regular maintenance ensures the longevity and safe operation of your shelving unit.

  • Čištění: Wipe down steel components with a damp cloth and mild detergent. Dry thoroughly. For MDF panels, use a dry or slightly damp cloth; avoid excessive moisture.
  • Inspekce: Periodically check all connections to ensure they remain secure. Tighten any loose components if applicable (though this model is tool-free, ensure plug-in connections are firm).
  • Poškození: If any part of the shelving unit becomes damaged, discontinue use immediately and replace the affected components.

Odstraňování problémů

Refer to these common issues and solutions.

ProblémMožná příčinaŘešení
Jednotka se kymácí nebo je nestabilní.Connections not fully seated; uneven floor; not wall-mounted.Ensure all plug-in connections are firm. Move to a level surface. Consider wall mounting for added stability.
Police se pod zátěží prohýbá.Přetížená police; hmotnost není rovnoměrně rozložena.Reduce load to within 175 kg limit. Redistribute items evenly.
Obtížnost se sestavováním komponentů.Components not aligned correctly; burrs on metal.Ensure components are aligned precisely before tapping into place. A rubber mallet can assist. Check for any obstructions in slots.
Chybějící části.Chyba v balení.Contact Floordirekt customer support with your purchase details.

Specifikace

FunkceDetail
ZnačkaFloordirekt
ModelLakota
BarvaŠedá
Rozměry (D x Š x V)60 x 120 x 200 cm (23.6 x 47.2 x 78.7 palce)
Maximální nosnost (na polici)175 kilogramů (385 liber)
Maximum Weight Capacity (total per unit)875 kilogramů (1929 liber)
MateriálSteel sheet and 4mm MDF panels
Speciální funkceDurable, Adjustable Shelves (5cm increments), Easy Tool-Free Assembly, Can be converted into workbenches, Wall Mountable
Hmotnost položky17 kilogramů (37.5 liber)
Počet polic5
Type of FasteningFloor mounting (with optional wall mounting)

Záruka a podpora

The Floordirekt Lakota Heavy Duty Shelving Unit comes with a 10letá záruka výrobce.

A person standing next to the assembled shelving unit, showcasing its size and stability, with text mentioning quality, non-sharp edges, workbench usability, and 10-year warranty.

Figure 5: A Floordirekt representative highlighting the product's quality, non-sharp edges, versatility as a workbench, and the included 10-year manufacturer's warranty.

For warranty claims, missing parts, or technical assistance, please contact Floordirekt customer support through your retailer or visit the official Floordirekt website. Please have your purchase receipt and model information ready.

Online podpora: Visit the Floordirekt Brand Store

Související dokumenty - Lakota 200x120x60cm

Předview Concept Epure MK-107 Shelving Unit Assembly Instructions
Detailed, step-by-step instructions for assembling the Concept Epure MK-107 shelving unit. Includes a comprehensive parts list, visual descriptions of each component, and guidance on installation and anchoring.
Předview Floordirekt Logomatte Classic: Technische Daten und Spezifikationen
Detaillierte technische Daten und Spezifikationen für die Floordirekt Logomatte Classic, einschließlich Material, Abmessungen, Haltbarkeit und Pflegehinweisen.
Předview Concept Epure MK-027 Shelving Unit Assembly Instructions
Detailed assembly guide for the Concept Epure MK-027 shelving unit. Includes a comprehensive parts list, step-by-step visual instructions transcribed into text, and essential anchoring advice for safe installation.
Předview Návod k montáži policového regálu Concept Epure MK-016 - Průvodce instalací
Podrobný návod k sestavení regálové jednotky Concept Epure MK-016. Obsahuje seznam dílů, podrobné pokyny a schémata popsaná v textu.
Předview Návod k montáži policového dílu Concept Epure MK-012
Podrobný návod k montáži regálové jednotky Concept Epure MK-012, včetně podrobného seznamu dílů a srozumitelných pokynů k sestavení jednotky.
Předview Concept Epure MK-120 Shelving Unit Assembly Instructions
Detailed, step-by-step assembly guide for the Concept Epure MK-120 shelving unit. Includes a comprehensive parts list and visual descriptions for each assembly stage, ensuring a clear and accessible building process.