Stelpro Prima Series Baseboard Heater User Manual

1. Konec produktuview

The Stelpro Prima Series Baseboard Heater, model SPR1002W, is a high-performance heating unit designed for residential and commercial applications. This compact and sleek baseboard heater provides efficient and consistent warmth, making it suitable for various room types including living rooms, bedrooms, and offices. Its design emphasizes both durability and ease of maintenance.

Obrázek 1.1: Úhlové view of the Stelpro Prima Series Baseboard Heater.

2. Bezpečnostní informace

Please read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in fire, electric shock, or personal injury. Retain this manual for future reference.

• Elektrické připojení: Tento ohřívač vyžaduje pevné připojení 240 V. Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy.
• Umístění: Do not install the heater directly below a wall outlet. Maintain adequate clearance from combustible materials such as curtains, furniture, and bedding.
• Větrání: Ensure that the heater's air inlets and outlets are not obstructed. Blockage can lead to overheating.
• Vystavení vodě: Do not install the heater in areas where it may come into contact with water, such as bathrooms or laundry rooms, unless specifically rated for such environments.
• Bezpečnost dětí: The heater features a reinforced front panel and small openings to prevent access to heating elements, enhancing safety. However, always supervise children around operating heaters.
• Údržba: Před prováděním jakékoli údržby nebo čištění odpojte napájení.

Figure 2.1: Illustration of the 240V hardwired connection requirement.

3. Vlastnosti produktu

The Stelpro Prima Series Baseboard Heater incorporates several features designed for performance, safety, and convenience:

• High-Performance Heating: Delivers up to 1000W of heat on a 240V circuit, or 750W when connected to a 208V circuit, ensuring consistent warmth and energy efficiency.
• Kompaktní design: Up to 25% shorter than traditional baseboard heaters, optimizing space without compromising heating performance.
• Odolná konstrukce: Features a reinforced, impact-resistant front panel for enhanced longevity.
• Zvýšená bezpečnost: Designed with safe housing and small openings to prevent direct access to heating elements.
• Snadná instalace: Includes guide marks for quick and straightforward mounting.
• Jednoduchá údržba: Equipped with a two-click removable front panel for easy cleaning.
• Kompatibilita termostatu: Easily installed with options for built-in or wall-mounted thermostat controls (sold separately).

4. Instalační příručka

Proper installation is crucial for the safe and efficient operation of your Stelpro baseboard heater. It is recommended that installation be performed by a certified electrician.

4.1 Kontrolní seznam před instalací

• Ověřte, že zásoba objtage matches the heater's voltage (240 V).
• Ensure the circuit breaker is turned off before beginning any electrical work.
• Confirm that the installation location provides adequate clearance from walls, furniture, and other obstructions. Refer to local codes for specific clearance requirements.
• Gather necessary tools: drill, screwdriver, wire strippers, level, measuring tape.

4.2 Montáž ohřívače

1. Determine the desired mounting location. The heater is designed for floor mounting.
2. Use the integrated guide marks on the heater for precise drilling and mounting.
3. Secure the heater firmly to the wall studs or using appropriate wall anchors.

Figure 4.1: Product dimensions for installation planning. Dimensions are approximately 36 1/16" (916 mm) in length, 7 1/16" (179 mm) in height, and 2 5/8" (67 mm) in depth.

4.3 Elektrické připojení

1. Ujistěte se, že je hlavní jistič VYPNUTÝ.
2. Connect the heater's wires to the household wiring according to the wiring diagram provided with the product and local electrical codes. This is a hardwired connection.
3. If installing a separate thermostat (sold separately), follow its specific wiring instructions.
4. Once wiring is complete, secure all connections and replace the wiring compartment cover.

5. Návod k obsluze

After successful installation, you can begin operating your Stelpro Prima Series Baseboard Heater.

5.1 Počáteční zapnutí

1. Zapněte napájení hlavním jističem.
2. If using a built-in thermostat, set the desired temperature. If using a wall-mounted thermostat, adjust it to your preferred setting.
3. The heater will begin to warm up. A slight odor may be present during the first few hours of operation as manufacturing residues burn off. This is normal and will dissipate.

5.2 Regulace teploty

The heater is designed to work with an ultra-precise electronic thermostat (sold separately) for optimal temperature control and consistent warmth. Adjust the thermostat to maintain your desired room temperature.

5.3 Sizing Your Heater

To ensure efficient heating, select a heater with appropriate wattage for your room size. The following table provides general guidance for determining the required power based on the area to be heated. These are approximate values and may vary based on insulation, window efficiency, and climate.

Figure 5.1: Guide for selecting heater wattage na základě plochy místnosti.

Area to Heat vs. Required Power (Approximate)

Area to Heat (sq ft)	Required Power (Watt)
0–30	300
30–50	500
50–75	750
75–100	1000
100–150	1500
150–200	2000
200–250	2500
250–300	3000
300–350	3500
350–400	4000
400–450	4500
450–500	5000

6. Údržba

Regular maintenance ensures the longevity and efficient operation of your baseboard heater.

6.1 Čištění

• Před čištěním: Always turn off the power to the heater at the main circuit breaker and allow it to cool completely.
• Čištění exteriéru: Vnější povrchy otřete měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu.
• Čištění interiéru: The front panel can be removed with a two-click mechanism for easy access to the interior. Carefully vacuum any dust or debris from the heating elements and air vents. Do not use water or liquid cleaners inside the heater.
• Opětovná montáž: Ensure the front panel is securely reattached before restoring power.

Obrázek 6.1: Nahoře view of the heater, showing the air grille for cleaning access.

7. Řešení problémů

If your Stelpro baseboard heater is not operating as expected, consult the following common issues and solutions. If the problem persists, contact qualified service personnel.

8. Specifikace

9. Záruka a podpora

For warranty information or technical support, please contact Stelpro customer service. Keep your purchase receipt and product model number (SPR1002W) handy when contacting support.

You can visit the official Stelpro store on Amazon for more information: Stelpro Amazon Store.

Figure 9.1: Stelpro is proudly made in Canada.