Teesa Steam Mop TSA5051 User Manual

1. Důležité bezpečnostní pokyny

Please read all instructions carefully before using the Teesa Steam Mop TSA5051. Keep this manual for future reference.

• Always ensure the appliance is unplugged before filling the water tank or performing maintenance.
• Nenechávejte parní mop bez dozoru, když je zapnutý.
• Během provozu udržujte děti a domácí zvířata mimo dosah spotřebiče.
• V nádrži používejte pouze destilovanou nebo demineralizovanou vodu, abyste zabránili hromadění minerálů.
• Nestříkejte páru na lidi, zvířata ani elektrické spotřebiče.
• Avoid using the steam mop on unsealed hardwood floors or surfaces that are sensitive to heat and moisture.
• Always attach a cleaning pad before operating the steam mop.
• Pokud je napájecí kabel poškozen, musí jej vyměnit výrobce, jeho servisní zástupce nebo podobně kvalifikovaná osoba, aby se předešlo nebezpečí.

2. Konec produktuview a Komponenty

Familiarize yourself with the parts of your Teesa Steam Mop TSA5051 before assembly and operation.

Obrázek 2.1: Fully assembled Teesa Steam Mop TSA5051, front view.

Obrázek 2.2: Strana view of the steam mop, showing the handle and power cord wrap.

Obrázek 2.3: The detachable handheld steam unit.

Obrázek 2.4: Illustration of detaching the handheld unit from the main body.

Obrázek 2.5: Included accessories: round brush, joint accessory, slot nozzle, scraper.

Obrázek 2.6: Measuring cup for water and adapter for accessories.

Obrázek 2.7: Two sponge cloths (mop pads) and the carpet glider frame.

Zahrnuté komponenty:

• Hlavní jednotka parního mopu (s odnímatelným ručním napařovačem)
• Montáž rukojeti
• 2 x Sponge Cloths (Mop Pads)
• Odměrka
• Adaptér příslušenství
• Kulatý kartáč
• Joint Accessory
• Štěrbinová tryska
• Škrabka
• Carpet Glider Frame

3. Nastavení a montáž

1. Sestavte rukojeť: Insert the handle assembly into the main steam mop unit until it clicks securely into place.
2. Připevnění čisticí podložky: Place one of the sponge cloths onto the bottom of the mop head, ensuring it is securely attached.
3. Naplňte nádrž na vodu:
   • Otevřete uzávěr nádržky na vodu.
   • Using the provided measuring cup, fill the water tank with up to 380 ml of distilled or demineralized water. Do not overfill.
   • Bezpečně uzavřete uzávěr nádržky na vodu.
4. Optional: Attach Carpet Glider: For refreshing carpets, place the mop head with the attached cleaning pad into the carpet glider frame.

4. Návod k obsluze

4.1. Using as a Steam Mop

1. Ujistěte se, že je nádržka na vodu naplněná a je nasazena čisticí podložka.
2. Plug the power cord into a grounded electrical outlet (220-240 V AC, 50 Hz).
3. The steam mop will begin heating. The indicator light will illuminate, signaling preparation. The device is ready in approximately 25 seconds.
4. Select the desired steam level (3 levels available) using the control button.
5. Begin cleaning by moving the mop head slowly and steadily over the floor surface. The swivel head allows for easy maneuverability.
6. For carpet refreshing, ensure the carpet glider is attached and move the mop over the carpet.
7. When finished, unplug the appliance and allow it to cool before emptying any remaining water and cleaning.

4.2. Using as a Handheld Steam Cleaner

1. Unplug the steam mop and ensure it is cool.
2. Press the release button to detach the handheld steam unit from the main body (refer to Figure 2.4).
3. Attach the desired accessory (e.g., round brush, slot nozzle, joint accessory, scraper) to the handheld unit using the accessory adapter if needed.
4. Fill the water tank if necessary (follow instructions in Section 3.3).
5. Plug in the handheld unit. Wait for the indicator light to show it's ready (approx. 25 seconds).
6. Namiřte páru na čištěný povrch. Buďte opatrní, pára je horká.
7. After use, unplug the unit and allow it to cool before detaching accessories and storing.

5. Údržba

Regular maintenance ensures optimal performance and extends the life of your steam mop.

1. Čistící podložky: The sponge cloths can be machine washed with mild detergent. Do not use bleach or fabric softeners. Air dry only. Replace pads when they become worn or lose their cleaning effectiveness.
2. Vyprázdnění nádrže na vodu: After each use, unplug the appliance and allow it to cool. Empty any remaining water from the tank.
3. Čištění exteriéru: Otřete vnější stranu parního mopu čističemamp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
4. Odvápnění: If you notice a decrease in steam production or mineral residue, descaling may be necessary.
   • Mix a solution of 1 part white vinegar to 2 parts water.
   • Nalijte roztok do vodní nádrže.
   • Zapojte jednotku do zásuvky a nechte ji zahřát.
   • Run the unit until half of the solution is used, then unplug and let it sit for 30 minutes.
   • Plug it back in and run until the tank is empty.
   • Rinse the tank thoroughly with fresh water and run two full tanks of fresh water through the unit to flush out any vinegar residue.
5. Skladování: Store the steam mop in a cool, dry place. Wrap the power cord around the designated cord wraps on the handle (refer to Figure 2.2).

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Teesa webUschovejte si doklad o koupi pro případné reklamace.

For further assistance, you may contact Teesa customer service through their official channels.