1. Úvod
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Behringer MS-5 37-key Analog Synthesizer. Please read this manual thoroughly before using the instrument to ensure proper functionality and to maximize your creative potential.
The Behringer MS-5 is a 2-voice monophonic analog synthesizer featuring a 37-key semi-weighted keybed, two powerful oscillators, and extensive sound sculpting capabilities, including AR/ADSR envelopes and a 4-pole/1-pole VCF. It also includes USB connectivity and external input for expanded possibilities.
2. Důležité bezpečnostní pokyny
Při používání tohoto výrobku vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění osob.
- Zdroj napájení: Připojte jednotku pouze k síťovému napětítage uvedeno na zařízení.
- Kabely: Do not place power cords near heat sources or heavy objects. Do not modify the power cord.
- vlhkost: Do not expose the unit to rain or moisture. Do not use near water.
- Větrání: Zajistěte dostatečné větrání. Neblokujte větrací otvory.
- Servis: Nepokoušejte se o opravu jednotky sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.
- Čištění: Čistěte pouze suchým hadříkem.
3. Obsah balení
Po vybalení se prosím ujistěte, že jsou všechny níže uvedené položky přítomny a v dobrém stavu:
- Behringer MS-5 Analog Synthesizer
- Napájecí adaptér
- USB kabel
- Rychlý průvodce (tento návod)
Pokud některá položka chybí nebo je poškozena, okamžitě kontaktujte svého prodejce.
4. Nastavení
4.1 Fyzická připojení
Before connecting any cables, ensure the synthesizer and all connected devices are powered off.
- Zvukový výstup: Connect the main audio output of the MS-5 to your mixer, audio interface, or amplifier using a standard 1/4-inch TS cable.
- Sluchátka: For private monitoring, connect headphones to the dedicated headphone jack.
- USB připojení: Connect the MS-5 to your computer using the supplied USB cable for MIDI communication and potential firmware updates.
- Externí vstup: If using an external audio source, connect it to the external input jack.
- Moc: Connect the power adapter to the DC input on the rear panel of the MS-5, then plug the adapter into a suitable power outlet.
Obrázek 4.1: Shora dolů view of the Behringer MS-5, illustrating the layout of controls and connection points on the rear panel.
4.2 Zapnutí/vypnutí
After all connections are made, press the POWER button located on the rear panel to turn the unit on. To power off, press the POWER button again. Always power off the unit before disconnecting cables.
5. Návod k obsluze
The Behringer MS-5 features a classic analog signal path with dedicated sections for sound generation and modulation. Familiarize yourself with the control layout for effective sound design.
Obrázek 5.1: Úhlové view of the Behringer MS-5, showcasing the 37-key semi-weighted keybed and the accessible control panel.
5.1 Oscillators (VCO-1 & VCO-2)
The MS-5 is equipped with two Voltage Controlled Oscillators (VCOs) that generate the primary sound. Each VCO offers selectable waveforms and pitch control.
- Průběhy: Select between Triangle, Ramp, Square, and Pulse waveforms. The Pulse Width control allows for dynamic timbre changes on the Square/Pulse wave.
- Rozteč: Adjust the pitch of each VCO independently.
- Synchronizovat: Synchronize VCO-2 to VCO-1 for harmonic rich sounds.
5.2 svtage řízený filtr (VCF)
The VCF shapes the tonal characteristics of the sound. The MS-5 features a versatile 4-pole/1-pole VCF.
- Frekvence: Controls the cutoff point of the filter.
- Rezonance: Emphasizes frequencies around the cutoff point, creating a "wah" effect at higher settings.
- Envelope Modulation: The VCF can be modulated by the ADSR envelope for dynamic filter sweeps.
5.3 Envelopes (AR & ADSR)
Two envelopes are available to control the amplitude (VCA) and filter (VCF) over time.
- AR Envelope: Attack and Release controls for simpler amplitude shaping.
- ADSR obálka: Attack, Decay, Sustain, and Release controls for more complex amplitude and filter modulation.
5.4 Low Frequency Oscillators (LFO-1 & LFO-2)
The two LFOs provide modulation sources for various parameters, adding movement and expression to your sounds.
- Hodnotit: Nastavuje rychlost LFO.
- Průběhy: Selectable waveshapes for different modulation characteristics.
- Destinace: LFOs can be routed to modulate pitch, filter cutoff, and pulse width.
5.5 Mixer, Ring Mod, and Noise Generator
- Mixér: Blends the levels of VCO-1, VCO-2, Ring Mod, and Noise Generator before they enter the VCF.
- Ring Mod: Multiplies the frequencies of two input signals (VCO-1 and VCO-2) to create metallic, inharmonic tones.
- Noise Generator: Adds white noise for percussive sounds, wind effects, or to thicken existing patches.
5.6 USB připojení
The USB port allows the MS-5 to function as a MIDI controller and receive MIDI data from a computer or other MIDI devices. This enables integration with Digital Audio Workstations (DAWs) for sequencing and automation.
5.7 Externí vstup
The external input allows you to process external audio signals through the MS-5's filter and VCA sections, expanding its utility beyond internal sound generation.
6. Údržba
6.1 Čištění
To clean the synthesizer, use a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents. For stubborn dirt, a slightly damp Lze použít hadřík a poté suchý hadřík.
6.2 Skladování
When not in use for extended periods, store the MS-5 in a dry, dust-free environment, away from direct sunlight and extreme temperatures. Consider using a dust cover to protect the keys and controls.
7. Řešení problémů
If you encounter issues with your Behringer MS-5, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvukový výstup | Power off, cables loose, volume low, VCA/VCF settings. | Ensure power is on. Check all audio cables. Increase main volume and VCA level. Adjust VCF cutoff and resonance. |
| MIDI nefunguje | Incorrect USB connection, driver issues, DAW settings. | Verify USB cable connection. Check computer's device manager for driver status. Ensure correct MIDI input is selected in your DAW. |
| Nereagující ovládací prvky | Firmware issue, temporary glitch. | Power cycle the unit. Check Behringer's webstránky pro aktualizace firmwaru. |
If the problem persists, please contact Behringer customer support.
8. Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | MS-5 |
| Číslo modelu položky | 0722-AAR86-US1 |
| Značka | Behringer |
| Typ nástroje | Analogový syntetizátor |
| Počet klíčů | 37 (Semi-weighted) |
| Technologie připojení | USB |
| Typ konektoru | USB |
| Oscilátory | 2-voice Monophonic Analog, 4 Switchable Waveforms |
| Filtr | 4-pole/1-pole VCF |
| Speciální funkce | Foldable Playing Design |
| Hmotnost položky | 26.5 libry |
| Rozměry produktu | 30.6 x 19.2 x 7 palce |
| UPC | 787790559757 |
9. Záruka a podpora
Produkty Behringer jsou navrženy pro spolehlivost a výkon. Podrobné informace o záruce naleznete v záruční kartě dodané s produktem nebo na oficiálních webových stránkách společnosti Behringer. webweb. Pro technickou podporu, registraci produktu nebo stažení nejnovějších ovladačů a firmwaru navštivte www.behringer.com.
You can also find additional resources and contact information on the Behringer store page on Amazon: Obchod Behringer.
