FORSINING P1410 Mechanical Watch User Manual

1. Konec produktuview

This manual provides instructions for the FORSINING P1410 Mechanical Men's Watch. This timepiece features an automatic self-winding movement, a moon phase indicator, and sub-dials for date and day of the week. It is designed for daily wear and offers a blend of traditional watchmaking with practical functions.

Figure 1: FORSINING P1410 Mechanical Watch, front view.

2. Počáteční nastavení

2.1 Rozbalení a kontrola

Po obdržení hodinek je opatrně vyjměte z obalu. Zkontrolujte, zda hodinky nejsou viditelně poškozené. Ujistěte se, že jsou ze sklíčka a zadního pouzdra odstraněny všechny ochranné fólie.

2.2 Počáteční vinutí

This watch features an automatic mechanical movement and does not require a battery. For initial use or after a period of inactivity, manually wind the watch:

1. Najděte korunku na pravé straně pouzdra hodinek.
2. Ujistěte se, že je korunka zcela zatlačena (poloha 0).
3. Rotate the crown clockwise approximately 20-30 times. This will build up the initial power reserve.
4. The watch will then self-wind with natural wrist movement during wear. A full power reserve lasts approximately 45 hours.

Obrázek 2: Zadní view of the watch showing the crown and adjustment buttons.

2.3 Nastavení času, data a dne

The watch has a main crown for time adjustment and two push-buttons for date and day adjustment.

1. Čas nastavení:
   • Pull the crown out to Position 1 (farthest out).
   • Rotate the crown to move the hour and minute hands clockwise until the correct time is displayed.
   • Push the crown back into Position 0 to start the watch.
2. Datum nastavení:
   • Locate the date calendar button (typically on the lower right side of the case, near 4 o'clock).
   • Use a small, non-sharp tool (like a toothpick) to gently press this button repeatedly until the correct date is shown on the date sub-dial.
3. Setting Day of the Week:
   • Locate the weekly calendar button (typically on the upper right side of the case, near 2 o'clock).
   • Use a small, non-sharp tool to gently press this button repeatedly until the correct day of the week is shown on the day sub-dial.
4. Setting Moon Phase:
   • The moon phase indicator typically advances with the main time setting. Adjust the main time hands past 12 AM/PM to observe the moon phase change.
   • Some models may have a dedicated pusher for moon phase, but for this model, it's usually linked to the time.

Důležité: Avoid adjusting the date or day between 9 PM and 3 AM, as this is when the watch's internal mechanisms are engaged in changing these indicators, and manual adjustment can cause damage.

3. Návod k obsluze

3.1 Automatický pohyb

The FORSINING P1410 watch is powered by an automatic mechanical movement. This means it is wound by the natural motion of your wrist. When worn regularly (8-10 hours a day), the watch will maintain its power reserve. If the watch is not worn for an extended period, it may stop and will need to be manually wound as described in Section 2.2.

Figure 3: The watch dial showcasing the visible mechanical tourbillon.

3.2 Moon Phase Indicator

The sub-dial at the 12 o'clock position displays the moon phase, indicating whether it is day or night. This indicator advances automatically with the main time. The sun symbol typically represents daytime, and the moon/stars represent nighttime.

3.3 Date and Day Sub-dials

The sub-dial at the 9 o'clock position indicates the day of the week (e.g., MON, TUE, WED). The sub-dial at the 3 o'clock position displays the date (1-31). These are adjusted using the dedicated push-buttons as described in Section 2.3.

Obrázek 4: Detailní view of the moon phase, day, date sub-dials, and tourbillon.

3.4 Světelný displej

The hands and hour markers of the watch are treated with a luminous material. After exposure to light, they will glow in low-light conditions, allowing for readability in the dark.

Figure 5: The watch displaying its luminous hands and markers in low light.

4. Péče a údržba

4.1 Čištění

To maintain the appearance of your watch, wipe the case and strap regularly with a soft, dry cloth. For stainless steel bands, a slightly damp Lze použít hadřík a ihned osušit. Nepoužívejte agresivní chemikálie ani abrazivní materiály.

4.2 Voděodolnost

This watch is rated for 3ATM (30 meters) water resistance. This means it is suitable for daily use, such as splashes, rain, and hand washing. It is ne suitable for showering, bathing, swimming, diving, or any water activities involving submersion or high-pressure water. Ensure the crown is fully pushed in before any contact with water.

Figure 6: The watch demonstrating its 30M water resistance against splashes.

4.3 Skladování

When not wearing the watch for an extended period, store it in a dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. For automatic watches, a watch winder can be used to keep the movement running and maintain lubrication.

5. Řešení problémů

6. Specifikace produktu

Obrázek 7: View of the automatic mechanical movement through the transparent case back.

7. Záruka a podpora

For information regarding warranty coverage, product support, or service inquiries, please refer to the warranty card included with your purchase or contact FORSINING customer service through the retailer where the watch was purchased. Please retain your proof of purchase for warranty claims.