ROZŠÍŘENÍ 155Amp Uživatelská příručka pro MIG svářečku

1. Úvod

This manual provides comprehensive instructions for the safe and effective operation, setup, maintenance, and troubleshooting of your FLARING 155Amp MIG Welder. This versatile 3-in-1 machine supports Gasless MIG, Stick, and Lift TIG welding, designed for various applications from home projects to professional use.

2. Bezpečnostní informace

Při obsluze svářecího zařízení vždy upřednostňujte bezpečnost. Nedodržení bezpečnostních pokynů může vést k vážnému zranění nebo smrti.

• Používejte vhodné osobní ochranné prostředky (OOP), včetně svářečské kukly, rukavic a ochranného oděvu.
• Zajistěte dostatečné větrání, abyste zabránili vdechování svářečských výparů.
• Udržujte hořlavé materiály mimo oblast svařování.
• Always disconnect power before performing maintenance or changing accessories.
• Nepoužívejte svářečku ve vlhkém prostředí.
• Consult local safety regulations and standards.

3. Konec produktuview

The FLARING 155Amp MIG Welder (Model FM155-42CA) is a compact and powerful 3-in-1 welding machine. It features a large LED digital display for clear control and easy operation.

Figure 3.1: FLARING 155Amp MIG Welder and included accessories.

3.1 Klíčové vlastnosti:

• 3-in-1 Multi-function: Capable of Gasless MIG, Stick (MMA), and Lift TIG welding. (Note: Lift TIG torch sold separately).
• Vysoký výkon: Maximum output of 155A, suitable for mild steel up to 4mm (3/20"). Supports 0.8mm, 0.9mm, and 1.0mm flux-cored wire.
• Large LED Digital Display: Provides clear readings for welding mode, current, and voltage, enhancing operational efficiency.
• Přenosný design: Weighs only 12 pounds (5.67 kg) with a convenient handle for easy transport.
• Pokročilá technologie: Incorporates IGBT inverter technology for stable and smooth arc performance, along with overheat/overload protection and efficient cooling.

Figure 3.2: Illustration of the 3-in-1 multi-function capabilities of the FM-155 welder.

Obrázek 3.3: Detail view of the large LED digital display, showing welding parameters.

4. Nastavení

4.1 Vybalení a kontrola:

Carefully unpack all components and inspect for any shipping damage. Retain original packaging for future transport or storage.

• 1 x MIG155A Welder
• 1 x MIG Welding Torch (3M)
• 1 x 0.8 Flux Cored Wire (0.5kg)
• 1 x Electronic Holder
• 1 x Brush & Hammer
• 1 x zemnící Clamp (2 miliony)
• 4 x Contact tips
• 2 x Gaiser
• 1 x Uživatelská příručka (tento dokument)

Figure 4.1: All standard accessories included with the FLARING FM155 welder.

4.2 Connecting the Welder:

1. Connect the MIG Welding Torch to the appropriate port on the front panel.
2. Připojte zemnící Clamp k obrobku nebo svařovacímu stolu a zajistěte tak dobrý elektrický kontakt.
3. For Stick welding, connect the Electronic Holder to the positive terminal and the Ground Clamp na záporný pól.
4. For Lift TIG welding, connect the TIG torch (sold separately) to the appropriate terminal and the Ground Clamp na záporný pól.

4.3 Installing Flux-Cored Wire (for MIG Gasless):

The welder features a stable and smooth wire feed structure.

1. Otevřete přihrádku pro podávání drátu.
2. Place the 0.5kg flux-cored wire spool onto the spindle.
3. Thread the wire through the wire pressing wheel and into the automatic wire feed mechanism.
4. Ensure the wire feeding wheel is correctly sized for the 0.8mm flux-cored wire. The welder supports 0.030" (0.8mm), 0.035" (0.9mm), and 0.040" (1.0mm) flux core wire sizes.
5. Zavřete přihrádku.

Obrázek 4.2: Vnitřní view of the wire feed structure, showing the spool and feeding mechanism.

5. Návod k obsluze

The FLARING FM155 offers three welding modes: Gasless MIG, Stick (MMA), and Lift TIG. Select the appropriate mode using the controls on the large LED digital panel.

Figure 5.1: Visual representation of the three welding modes: MMA/Stick, Flux Cored Wire (MIG), and Lift TIG.

5.1 Gasless MIG Welding:

This mode is ideal for welding stainless steel, carbon steel, and thicker steel without the need for external shielding gas, using flux-cored wire.

1. Ensure flux-cored wire is correctly installed (refer to Section 4.3).
2. Select "MIG Gasless" mode on the control panel.
3. Upravte proud a hlasitosttage settings as required for your material thickness. The machine provides clear digital readouts.
4. Begin welding, maintaining a consistent travel speed and arc length.

5.2 Stick (MMA) Welding:

For stick welding, ensure the electronic holder and ground clamp are connected as described in Section 4.2.

1. Insert the appropriate electrode into the electronic holder.
2. Select "Stick/MMA/ARC" mode on the control panel.
3. Upravte proud (amperage) according to the electrode type and material thickness.
4. Strike an arc and maintain a consistent arc length and travel speed for optimal results.

5.3 Lift TIG Welding:

For Lift TIG welding, an additional Lift TIG torch is required (sold separately). This mode provides precise control for delicate welding tasks.

1. Connect the Lift TIG torch and ensure proper tungsten electrode installation.
2. Select "Lift TIG" mode on the control panel.
3. Adjust current settings.
4. Oblouk zažehněte jemným dotykem wolframu na obrobek a mírným nadzvednutím.

5.4 Welding Samples:

The FLARING FM155 is capable of welding various materials and shapes, including iron blocks, galvanized pipes, round tubes, chairs, stainless steel, and steel frames.

Obrázek 5.2: Přamples of welds performed on different materials and structures, showcasing the versatility of the welder.

6. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho svářecího stroje.

• Čištění: Periodically clean the welder's exterior and ventilation openings to prevent dust and debris buildup. Use a dry, soft cloth.
• Contact Tips: Inspect and replace contact tips regularly, especially for MIG welding, to ensure consistent wire feeding and arc stability.
• Pozemní Clamp & Cables: Zkontrolujte uzemněníamp and all cables for damage or loose connections before each use.
• Skladování: Pokud svářečku nepoužíváte, skladujte ji v suchém a čistém prostředí.

Figure 6.1: The welder features internal cooling and protection systems to ensure durability and safe operation.

7. Řešení problémů

This section addresses common issues you might encounter with your FLARING 155Amp MIG Welder.

8. Specifikace

Detailed technical specifications for the FLARING 155Amp MIG Welder (Model FM155-42CA).

Figure 8.1: Detailed specification label for the FLARING FM-155 welder.

9. Záruka a podpora

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official FLARING webwebu. Uschovejte si účtenku jako doklad o koupi.