MOUNTUP EU0092A

MOUNTUP EconoMe Full Motion TV Wall Mount User Manual

Model: EU0092A

1. Úvod

Thank you for choosing the MOUNTUP EconoMe Full Motion TV Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for most 32-65 inch flat screen, LED, and 4K TVs, this mount offers swivel, tilt, and extension capabilities to optimize your viewing experience. It supports VESA patterns from 100x100mm to 400x400mm and can hold TVs up to 99 lbs.

Please read this manual thoroughly before installation and keep it for future reference. If you have any questions or require assistance, please contact our customer service.

2. Bezpečnostní informace

VAROVÁNÍ: Improper installation may result in serious personal injury or damage to your TV and property. If you do not understand these instructions or have doubts about the safety of the installation, please consult a qualified professional.

  • Nosnost: Nepřekračujte maximální nosnost 45 kg (99 liber).
  • Velikost televizoru: Tento držák je určen pro televizory s úhlopříčkou od 32 do 65 palců.
  • Kompatibilita VESA: Ensure your TV's VESA pattern (mounting hole spacing) is within the supported range of 100x100mm to 400x400mm.
  • Typ stěny: This mount is intended for installation on wood studs (max 16" spacing), concrete walls, or brick walls. NEINSTALUJTE do sádrokartonu samostatně. Always use a stud finder to confirm wood stud locations.
  • Kotvy: Concrete and brick wall installations require appropriate anchors. Concrete anchors (Φ10×61mm) can be provided upon request.
  • Nástroje: Během instalace používejte vhodné nástroje a noste ochranné pomůcky.
  • Dozor: Během instalace držte děti a domácí zvířata mimo dosah.

3. Obsah balení

Before beginning installation, verify that all parts are present and undamaged. If any parts are missing or defective, contact customer service immediately.

MOUNTUP EconoMe Full Motion TV Wall Mount components including the main mount assembly, TV brackets, a small level tool, and cable ties.

Obrázek: Overview of the MOUNTUP EconoMe Full Motion TV Wall Mount and included accessories.

  • Sestava nástěnné desky
  • TV držáky (2)
  • Sada spojovacího materiálu (různé šrouby, podložky, distanční podložky, hmoždinky)
  • Bubble Level Tool
  • Šablona pro montáž papíru
  • Stahovací pásky

4. Nastavení a instalace

The installation process involves three main steps. For detailed visual instructions, please refer to the official installation manual PDF available on the product page or contact customer support.

Three-step installation guide showing attaching brackets to TV, attaching wall plate to wall, and hanging TV.

Image: Simplified three-step installation process for the TV wall mount.

  1. Krok 1: Připevněte držáky k TV

    Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the two vertical TV brackets to the back of your TV, ensuring they are securely fastened and evenly aligned.

    Diagram showing various VESA patterns and a table of suitable VESA sizes from 100x100mm to 400x400mm.

    Image: Guide to available VESA patterns and suitable sizes for TV compatibility.

  2. Krok 2: Připevněte nástěnnou desku ke stěně

    Determine the desired height for your TV. Use a stud finder to locate wood studs if installing on a stud wall. Mark the drilling locations using the provided paper mounting template and the integrated level tool. For concrete or brick walls, use a hammer drill to create pilot holes and insert the appropriate anchors. Secure the wall plate assembly to the wall using the provided lag bolts. Ensure the wall plate is level and firmly attached.

    Diagram illustrating different wall types: wood stud (max 16 inches), concrete wall, and brick wall, indicating that anchors are needed for concrete and brick.

    Image: Important information on checking wall type and stud spacing before installation.

  3. Krok 3: Zavěste a připevněte televizi k nástěnné desce

    With assistance, carefully lift the TV (with brackets attached) and hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the wall plate. Tighten any safety screws or locking mechanisms on the TV brackets to prevent accidental dislodgement. Double-check all connections for security before releasintelevizor.

5. Obsluha a seřízení

Your MOUNTUP EconoMe TV wall mount offers a range of adjustments to achieve optimal viewing angles and flexibility.

5.1. Nastavení sklonu

The mount allows for vertical tilt adjustment to reduce glare and improve viewing comfort. You can tilt the TV up by +5° and down by -10°.

Diagram showing a TV mounted on the wall with arrows indicating a tilt range of +5 degrees up and -10 degrees down.

Image: Illustration of the tilting capability for anti-glare viewIng.

5.2. Nastavení otočení

The articulating arms allow you to swivel your TV left or right by up to ±45°, providing flexible viewing options from different areas of the room. The maximum swivel angle may vary depending on your TV's size.

5.3. Nastavení vyrovnání

After installation, you can fine-tune the horizontal level of your TV by ±3° to ensure it is perfectly straight.

Two diagrams: one showing a TV mount with arrows indicating a leveling adjustment of +/- 3 degrees, and another showing a TV swiveling +/- 45 degrees.

Image: Demonstrates premium adaptability with leveling and swivel adjustments.

5.4. Prodloužení a zatažení

The dual articulating arms allow the TV to extend up to 14.5 inches (36.8 cm) from the wall and retract back to a slim 2.7 inches (6.8 cm) profile, saving space when not in use.

A TV mounted on a wall mount, with arrows indicating it can extend up to 14.5 inches and retract to 2.7 inches from the wall.

Image: Illustrates the ultimate flexibility of extension and retraction.

5.5. Height Options

The design allows for two height options for mounting the TV brackets on the wall plate, providing flexibility to achieve eye-level comfort.

A diagram showing a TV mount with two possible height settings for the TV, labeled 1 and 2, indicating options for eye-level comfort.

Image: Demonstrates two height options for optimal eye-level viewIng.

6. Údržba

To ensure the longevity and safe operation of your TV wall mount, follow these simple maintenance guidelines:

  • Čištění: Pravidelně otírejte prach z montáže měkkým, suchým hadříkem. Na odolné skvrny použijte lehceamp hadříkem a jemným čisticím prostředkem a poté otřete dosucha. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Pravidelné kontroly: Every few months, inspect all screws and connections to ensure they remain tight and secure. Re-tighten any loose fasteners.
  • Hnutí: If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with the TV or wall.

7. Řešení problémů

If you encounter any issues with your MOUNTUP EconoMe TV Wall Mount, please refer to the common problems and solutions below. If the issue persists, contact our customer service.

ProblémMožná příčinaŘešení
Televizor není po instalaci v rovině.Wall plate not perfectly level; minor adjustments needed.Use the leveling adjustment feature (±3°) to fine-tune the TV's horizontal position.
Difficulty moving or adjusting the TV.Screws at pivot points are too tight; lack of lubrication.Slightly loosen the screws at the articulating joints. Apply a small amount of silicone-based lubricant if necessary.
Držák se na zdi zdá být volný.Lag bolts not fully tightened; incorrect wall anchors used.Ensure all lag bolts securing the wall plate are fully tightened. Verify that the correct anchors were used for your wall type. If unsure, consult a professional.
Držák na televizi nepasuje.Nesprávný vzor VESA nebo velikost/hmotnost televizoru.Double-check your TV's VESA pattern and weight against the mount's specifications. This mount supports VESA from 100x100mm to 400x400mm and up to 99 lbs.

8. Specifikace

FunkceSpecifikace
Číslo modeluEU0092A
Kompatibilita velikosti TV32 - 65 palce
Hmotnostní kapacitaAž 99 liber (45 kg)
Kompatibilita VESA100x100mm, 150x150mm, 200x200mm, 200x300mm, 300x300mm, 400x400mm, etc. (Min 100x100mm, Max 400x400mm)
Úhel náklonu+5° / -10°
Úhel otočení±45° (Max angle depends on TV size)
Nastavení úrovně±3°
Prodloužení od zdi2.7 palce (6.8 cm) až 14.5 palce (36.8 cm)
MateriálLegovaná ocel
BarvaČerný
Hmotnost položky8.14 libry
Rozměry balení17.56 x 6.65 x 2.83 palce
A large 99 LBS text indicating the weight capacity of the TV wall mount, with the mount itself shown in the background.

Image: Demonstrates the durability and stability of the mount, supporting up to 99 lbs.

9. Záruka a podpora

MOUNTUP is committed to providing quality products and excellent customer service. For any inquiries, concerns, or assistance with installation or parts, please do not hesitate to contact our support team. We are available to help you with any issues you may encounter.

For the most up-to-date warranty information and detailed support resources, please refer to the official MOUNTUP website or the product's Amazon page. You can also find a downloadable PDF version of the installation manual zde.

Související dokumenty - EU0092A

Předview MOUNTUP MU0014 Průvodce instalací TV držáku na stěnu
Podrobné pokyny k instalaci nástěnného držáku televizoru MOUNTUP MU0014, které zahrnují bezpečnost, hardware, kompatibilitu s normou VESA, montáž na zeď (dřevěné sloupky a beton) a nastavení pro plně nastavitelné naklápění a vyrovnání.
Předview MOUNTUP MU0057 Full Motion TV montážní příručka pro montáž na stěnu
Komplexní instalační návod pro plně pohyblivý nástěnný držák na televizi MOUNTUP MU0057. Zahrnuje upevnění na dřevěné sloupky a beton, kompatibilitu s normami VESA, bezpečnost a nastavení pro televizory do hmotnosti 77 kg.
Předview Návod k instalaci nástěnného držáku televizoru MOUNTUP YZ2352 US1.0
Podrobné pokyny k instalaci nástěnného držáku televizoru MOUNTUP YZ2352 US1.0. Tato příručka popisuje montáž na dřevěné sloupky a betonové stěny, kompatibilitu s normou VESA a bezpečnostní opatření pro bezpečné a optimální umístění. viewzkušenosti s používáním. Podporuje televizory do hmotnosti 88 kg s držáky VESA až do rozměrů 400x400 mm.
Předview Návod k instalaci nástěnného držáku MOUNTUP Full Motion TV – model YYZZ02 WG1.0
Komplexní pokyny k instalaci nástěnného držáku na televizi MOUNTUP Full Motion (model YYZZ02 WG1.0). Tato příručka obsahuje podrobné kroky pro bezpečnou montáž na dřevěné sloupky nebo betonové stěny, včetně seznamů dílů, schémat a postupů nastavení.
Předview Návod k instalaci nástěnného držáku televizoru MOUNTUP QTH-2B-US1
Komplexní návod k instalaci nástěnného držáku televizoru MOUNTUP QTH-2B-US1, zahrnující upevnění desky VESA, montáž na zeď (dřevěné sloupky a beton), zavěšení televizoru a postupy nastavení. Zahrnuje bezpečnostní opatření a podrobnosti o hardwaru v několika jazycích.
Předview Návod k instalaci nástěnného držáku televizoru MOUNTUP YZ2214_WG1.0
Komplexní instalační návod pro nástěnný držák televizoru MOUNTUP YZ2214_WG1.0, který zahrnuje bezpečnostní opatření, seznam dílů a podrobný návod k montáži na dřevěné a betonové stěny. Obsahuje podrobnosti o upevnění desky VESA, instalaci nástěnné desky, montáži televizoru a postupech nastavení.