1. Úvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LOVMOR FMS60AO-3LM 60-inch Floating Fireplace Mantel. Please read all instructions carefully before installation and use to ensure safety and proper functionality.
Klíčové vlastnosti:
- Natural Wood Texture: Preserves the original wood grain, offering a natural aesthetic.
- Robustní a lehký design: Solid wood material with a hollow design for strength without excessive wall burden.
- Isolation & Protection: Designed to isolate smoke and heat, protecting wall decorations.
- Thermal Modification Process: Enhanced hardness, scratch resistance, deformation resistance, and heat insulation.
- High Load-Bearing Capacity: Supports up to 130 pounds.
- Resin End Caps: Upgraded resin end caps prevent wood cracking, especially in winter.
2. Bezpečnostní informace
Caution: Install and use the product according to the provided instructions and be aware of any potential risks associated with its intended use near a fireplace.
- Ensure the mounting surface is structurally sound and capable of supporting the mantel's weight plus any items placed on it.
- Always use appropriate tools and follow all installation steps carefully.
- If mounting above a heat source, ensure adequate clearance as per local building codes and appliance manufacturer guidelines.
- Do not overload the mantel beyond its maximum weight capacity of 130 pounds.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- LOVMOR Floating Fireplace Mantel (1 unit)
- Mounting Board / Bracket (1 unit)
- Installation Hardware (screws, wall anchors suitable for drywall/concrete/steel)
Image: The mantel and its dimensions (60"W x 8"D x 3"H).
4. Instalační příručka
The LOVMOR Floating Fireplace Mantel is designed for easy wall-mount installation. It is recommended to have two people for safe installation.
Požadované nástroje (nejsou součástí dodávky):
- Vrtat
- Úroveň
- Tužka
- Měřicí páska
- Stud Finder (recommended for optimal stability)
Kroky instalace:
- 1. Příprava zdi: Clean the wall surface where the mantel will be installed. Determine the desired height and center position for your mantel. Use a stud finder to locate wall studs for secure mounting.
- 2. Mark Mounting Points: Hold the mounting board against the wall at your desired location. Use a level to ensure it is perfectly horizontal. Mark the positions for drilling through the pre-drilled holes on the mounting board.
Video: Demonstrates marking and leveling the mounting board for installation.
- 3. Drill Pilot Holes and Insert Anchors: Drill pilot holes at the marked locations. Insert the appropriate wall anchors (provided) into the pilot holes. If drilling into studs, pilot holes may be sufficient without anchors.
- 4. Attach Mounting Board: Align the mounting board with the installed anchors/pilot holes. Secure the mounting board to the wall using the provided screws. Ensure it is firmly attached and level.
Image: Step-by-step diagram of attaching the mounting board to the wall.
- 5. Mount the Mantel: Carefully slide the floating mantel onto the mounting rods of the attached board. Ensure the mantel is fully seated and flush against the wall. The mantel is designed to fit snugly over the mounting board.
Video: Shows the process of sliding the mantel onto the wall-mounted bracket.
- 6. Secure the Mantel (if applicable): Some models may include small screws to secure the mantel to the mounting board from underneath. If provided, insert and tighten these screws for added stability.
5. Usage & Care
Your LOVMOR Floating Fireplace Mantel is designed for both decorative and functional use.
- Dekorace: Use the mantel to display trophies, decorations, photos, books, and other cherished items.
- Ochrana: When installed above a fireplace, it helps to isolate smoke and heat, protecting items on the wall above.
- Čištění: Wipe with a dry cloth to remove dust and debris. Avoid harsh chemicals or abrasive cleaners that may damage the wood finish.
- Údržba: Periodically check the mounting screws for tightness to ensure continued stability.
Image: The mantel used as a decorative shelf above a fireplace.
6. Specifikace
| Atribut | Detail |
|---|---|
| Značka | LOVMOR |
| Název modelu | FMS60AO-3LM |
| Rozměry produktu | 60 cm Š x 8 cm H x 3 cm V |
| Hmotnost položky | 14.3 libry |
| Hmotnostní limit | 130 libry |
| Barva | Starý dub |
| Materiál | Solid Wood (Thermal Modified) with Resin End Caps |
| Typ instalace | Držák na zeď |
| Montáž Vyžadována | No (mounting required) |
| Doporučená použití | Fireplace, Storage, Decoration |
7. Řešení problémů
- Mantel appears loose or unstable:
- Ensure all mounting screws are fully tightened.
- Verify that the mounting board is securely attached to wall studs or appropriate heavy-duty anchors.
- Confirm the mantel is fully seated onto the mounting rods.
- Mantel is not level:
- Re-check the mounting board with a level during installation. Adjust screw positions or shims as necessary before fully tightening.
- Wood cracking:
- The mantel features resin end caps designed to minimize cracking. Ensure the mantel is not exposed to extreme temperature fluctuations or excessive humidity.
8. Záruka a podpora
For warranty information or product support, please contact LOVMOR customer service through your retailer or the official LOVMOR website. Please have your model name (FMS60AO-3LM) and purchase date available.
