1. Úvod
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Monport 100W MOPA Fiber Laser Engraver with Rotary Axis. Please read this manual thoroughly before operating the machine.
The Monport 100W MOPA Fiber Laser Engraver is an advanced marking machine designed for high-precision engraving and marking on various materials, including metals and certain plastics. It features an autofocus system, a 6.9" x 6.9" work area, and a rotary axis for cylindrical objects.
2. Bezpečnostní pokyny
WARNING: Laser radiation can cause severe injury. Always follow safety precautions.
- Při obsluze stroje vždy používejte vhodné ochranné brýle proti laseru.
- Ensure the work area is well-ventilated to remove fumes and dust generated during engraving.
- Nikdy se nedívejte přímo do laserového paprsku ani na jeho odrazy.
- Keep flammable materials away from the laser work area.
- Nepoužívejte stroj, pokud jsou odstraněny jakékoli kryty nebo jsou vyřazeny bezpečnostní pojistky.
- Ujistěte se, že je stroj řádně uzemněn.
- Seznamte se s postupem nouzového zastavení.
Image: Control panel of the Monport laser engraver, highlighting the laser switch, laser power switch, and the location of the built-in filter for safety and maintenance.
3. Nastavení a instalace
The Monport 100W MOPA Fiber Laser Engraver is designed for quick and easy setup. Follow these steps for initial installation:
- Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou přítomny všechny součásti uvedené v dodacím listu.
- Vertical Arm Installation: The vertical arm is foldable for shipping. To install, position the arm onto the base unit. Align the mounting holes and secure it with the provided screws. Tighten the screws firmly but do not overtighten.
- Připojení napájení: Connect the power cable to the machine and a grounded electrical outlet.
- Instalace softwaru: Install the provided BSL (Free) or LightBurn (Paid) software on your computer. Refer to the software-specific instructions for detailed installation steps.
- Rotary Axis (Optional): If using the rotary axis, connect it according to the separate rotary axis manual.
Image: Step-by-step guide for installing the vertical arm of the laser engraver, demonstrating how to unfold and secure it to the base.
Image: The Monport laser engraver connected to a computer, illustrating compatibility with Windows operating systems and software like BSL App and LightBurn.
4. Návod k obsluze
4.1 Základní obsluha
- Zapnutí: Zapněte hlavní vypínač na stroji.
- Spuštění softwaru: Launch the engraving software (BSL or LightBurn) on your computer.
- Umístění materiálu: Place the material to be engraved on the work platform. Ensure it is stable and correctly positioned.
- Automatické zaostření: The machine features one-button autofocus. Press the "FOCUS" button on the control panel. The laser head will automatically adjust its height to achieve optimal focus. Manual focus is also available using the "UP" and "DOWN" buttons, guided by three red lights.
- Design Import and Settings: Import your design into the software. Adjust laser parameters such as power, speed, frequency, and pulse width according to the material and desired effect.
- Začněte gravírovat: Spusťte proces gravírování ze softwaru. Pečlivě sledujte proces.
Obrázek: Overview of the Monport laser engraver, highlighting its 100W MOPA laser source, autofocus feature, and 175x175mm (6.9x6.9 inch) marking area.
4.2 Použití rotační osy
The rotary axis allows for engraving on cylindrical or irregularly shaped objects. To use it:
- Install the rotary axis as per its dedicated manual.
- Mount the cylindrical object securely onto the rotary axis chuck.
- Adjust the vertical arm for optimal working height. The arm offers a ±90° rotation for flexible positioning. Loosen the screws, adjust the angle, and re-tighten.
- In the software, enable and configure the rotary axis settings.
- Proceed with autofocus and engraving as described in Basic Operation.
Image: The laser engraver's vertical arm adjusted to a rotated position, allowing for engraving on a cylindrical object, showcasinjeho flexibilitu.
4.3 Material Compatibility and Effects
The Monport 100W MOPA Fiber Laser is suitable for a wide range of materials and effects:
- Kovy: Stainless steel, aluminum, gold, silver, alloy, steel, jewelry. Capable of color marking on stainless steel and anodized aluminum black engraving.
- Nekovy: Ceramic, marble, leather, plastics, colored acrylic.
- Efekty: Precise cutting, drilling, intricate designs, vibrant color markings.
Image: Technical specifications of the 100W laser source, detailing its frequency range (1-3000kHz), pulse width (2-500ns), beam diameter (7±1mm), and max pulse energy (1.5mJ), along with its extended service life.
Image: The Monport laser engraver demonstrating its capability to create vibrant color markings, shown with a colorful butterfly design on a workpiece.
5. Údržba
Pravidelná údržba zajišťuje optimální výkon a prodlužuje životnost vašeho laserového gravírovacího stroje.
- Čištění: Regularly clean the work area, lens, and mirrors with a soft, lint-free cloth and appropriate cleaning solution.
- Prachový filtr: Check and clean or replace the built-in dust filter periodically to maintain proper ventilation and prevent dust accumulation inside the machine.
- Kontrola kabelů: Inspect all cables and connections for wear or damage.
- Aktualizace softwaru: Keep your engraving software updated to the latest version for new features and bug fixes.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný laserový výstup | Laser switch off, power cable loose, software error. | Ensure laser switch is on. Check power connections. Restart software and machine. |
| Špatná kvalita gravírování | Incorrect focus, wrong parameters, dirty lens. | Perform autofocus. Adjust laser power/speed. Clean the lens. |
| Stroj se nepřipojuje k počítači | Problém s kabelem USB, ovladač není nainstalován, software nerozpoznává zařízení. | Check USB cable. Reinstall drivers. Verify software device settings. |
| Rotary axis not rotating | Incorrect connection, software not configured for rotary axis. | Check rotary axis connection. Enable and configure rotary axis in software. |
7. Specifikace
- Značka: Monport
- Číslo modelu: YXF100
- Typ laseru: 100W MOPA Fiber Laser
- Pracovní oblast: 175 × 175 mm (6.9" × 6.9")
- Automatické zaostření: One-button autofocus (error < ±1mm)
- Vertical Arm Rotation: ±90° adjustable
- Max Marking Speed: Až 10000 mm / s
- Velikost bodu: 0.01mm ultra-fine spot
- Frekvence laseru: 1-3000 kHz
- Šířka pulzu: 2-500 ns
- Průměr paprsku: 7±1 mm
- Maximální energie pulzu: 1.5 mJ
- Materiál: Aluminum (casing)
- Provozní režim: Automatický
- Kompatibilita softwaru: BSL (Free), LightBurn (Paid)
- V ceně: Mopa AF Fiber Laser Engraver with Rotary Axis
8. Záruka a podpora
For warranty information and technical support, please refer to the official Monport website or contact Monport customer service directly. Keep your purchase receipt for warranty claims.
Monport Customer Service: Monport Store on Amazon
9. Produktová videa
Monport Autofocus Fiber Laser Overview
Video: Overview of the Monport Autofocus Fiber Laser, demonstrating its key features and capabilities, including quick installation, autofocus innovation, and flexible vertical arm rotation.
Monport Fiber Laser Engraver in Action
Video: This video showcases the Monport Fiber Laser Engraver performing various marking tasks, including engraving on a ring and a metal bottle, demonstrating its precision and versatility.
