Návod k obsluze vysavače matrací Jimmy BX7 Pro Max Graphene

1. Úvod

This manual provides comprehensive instructions for the safe and effective use of your Jimmy BX7 Pro Max Graphene Mattress Vacuum Cleaner. This corded handheld vacuum is designed for deep cleaning mattresses, sofas, and other fabric surfaces, featuring advanced technologies such as graphene heating, UV-C sterilization, and a smart dust sensor.

Před použitím zařízení si prosím pečlivě přečtěte tento návod k obsluze a uschovejte si jej pro budoucí použití.

2. Zahrnuté komponenty

Jimmy BX7 Pro Max Mattress Vacuum Cleaner Unit
HEPA Filter (one pre-installed, additional may be included)
Napájecí kabel (přiložen)
Cleaning Brush with Blade (for maintenance)

3. Nastavení

3.1. Rozbalení a počáteční kontrola

Carefully remove all components from the packaging. Inspect the vacuum cleaner and accessories for any signs of damage. If any damage is found, do not use the device and contact customer support.

3.2. Instalace filtru

Ensure the HEPA filter is correctly installed in the dust cup. The filter is typically pre-installed. Refer to the 'Maintenance' section for instructions on how to access and reinstall the filter.

3.3. Připojení napájení

Plug the power cord into a standard electrical outlet. The device is corded and requires continuous power during operation.

Figure 1: Jimmy BX7 Pro Max Mattress Vacuum Cleaner. This image shows the overall design of the vacuum cleaner, highlighting its compact, handheld form factor with the dust cup and brush head visible.

4. Návod k obsluze

4.1. Zapnutí/vypnutí

Press and hold the power button for 2 seconds to start the vacuum cleaner. Press the power button again to turn it off.

4.2. Režimy a funkce čištění

Technologie ohřevu grafenem: The vacuum heats up to 149°F (65°C) in approximately 5 seconds. This heat penetrates deep into the fabric to aid in dust removal and dehumidification.
Sterilizace UV-C: Integrovaný UV lamp emits 254nm UV light for deep sterilization of surfaces. The UV lamp activates automatically when the vacuum is in contact with a surface and turns off when lifted.
High-Frequency Tapping: The device utilizes high-frequency tapping to dislodge dust and debris embedded deep within fabrics, enhancing cleaning effectiveness.
Smart Dust Sensor: A built-in intelligent dust sensor identifies dust levels on fabrics and displays the cleaning status via an LED indicator. A red light indicates a dirty area, while a blue light indicates a clean area.

LED screen and Smart Dust Sensor — Figure 2: LED Screen and Smart Dust Sensor. This image illustrates the LED display on the vacuum, showing how it indicates dust levels (red for dirty, blue for clean) and cleaning modes.

Technologie ohřevu grafenem — Figure 3: Graphene Heating Technology. This image depicts the vacuum's heating element in action, showing heat penetrating a mattress surface.

Figure 4: UV-C Sterilization. This image shows the UV light function of the vacuum, illustrating its use for deep sterilization on fabric surfaces.

4.3. Usage on Different Surfaces

The Jimmy BX7 Pro Max is professional for beds, couches, pillows, cribs, and other flat fabric surfaces. It is not suitable for long velvet, long fluff carpets, or hard floors.

4.4. Instruktážní video

Video 1: JIMMY UV mattress vacuum using instruction. This video demonstrates the proper way to use the Jimmy UV mattress vacuum, including activating its various functions.

5. Údržba

5.1. Cleaning the Dust Cup and Filter

To maintain optimal performance, clean the dust cup and HEPA filter after each use. Hold the dust cup with one hand and open the dust cup cover buckle with the other hand. Take out the filter and filter sponge, and clean them with water. Ensure they are completely dry before reassembling.

HEPA filtr — Figure 5: HEPA Filter. This image shows the HEPA filter, which should be cleaned regularly to maintain suction power.

5.2. Čištění kartáčového válce

Periodically check the brush roll for entangled hair or debris. Use the provided cleaning brush with a blade to cut and remove any wrapped hair. The brush roll is easily accessible for cleaning.

6. Řešení problémů

If you encounter any issues with your Jimmy BX7 Pro Max, refer to the following common problems and solutions:

6.1. Brush Roller Not Working

If the brush roller is not functioning, ensure it is free from obstructions like tangled hair or fabric. Check if it is correctly installed. Refer to the video below for detailed instructions.

Video 2: Anti-mite Vacuum Trouble Shooting Brush roller not working. This video provides guidance on troubleshooting a non-functional brush roller.

6.2. Power Cord Loose

If the power cord feels loose or is not providing consistent power, ensure it is securely plugged into both the device and the wall outlet. Avoid pulling the cord forcefully. Refer to the video below for detailed instructions.

Video 3: JIMMY Anti-mite Vacuum Trouble Shooting Power cord loose. This video demonstrates how to address issues with a loose power cord connection.

6.3. Weak Suction, Abnormal Noise, Overheating, or Auto Shut-off

These issues can often be resolved by checking the dust cup and filter for clogs, ensuring the brush roll is clear, and verifying proper assembly. If the device overheats, allow it to cool down before resuming use. Refer to the video below for detailed instructions.

Video 4: Weak suction, Abnormal noise, Over heating, Auto turn off. This video addresses common operational problems and provides solutions.

7. Specifikace

Značka	Jimmy
Název modelu	BX7 Pro Max
Speciální funkce	Kabelové
Typ filtru	HEPA filtr
Wattage	550 wattů
Sací výkon	16Kpa
Kapacita	1.1 libry (prachovka)
Rozměry produktu	16.14 cm D x 12.99 cm Š x 9.84 cm V
Hmotnost položky	6.49 libry
Délka napájecího kabelu	16.4 stop
Vlnová délka UV světla	254 nm
Teplota ohřevu	Až 149 °F (65 °C)
Vnitřní/venkovní použití	Krytý

8. Záruka a podpora

The product comes with a 1-year warranty for quality problems, offering a replacement machine or refund. If issues arise after 1 year, please contact customer support for parts replacement or repair services.

9. Bezpečnostní upozornění

Always disconnect the power plug before cleaning or performing maintenance.
Nepoužívejte UV lamp to irradiate people or pets directly.
Do not use the electric corded mattress vacuum anywhere with water.
Ensure the brush head, dust cup, and filter are installed correctly before use.
Not suitable for long velvet, long fluff carpets, or hard floors.
The mattress vacuum cleaner is designed for beds, mattresses, pillows, cribs, and other flat fabric surfaces.

	Uživatelská příručka k vysavači JIMMY BX7 Pro Max proti roztočům Uživatelská příručka k vysavači JIMMY BX7 Pro Max proti roztočům, která obsahuje pokyny k instalaci, používání, čištění, údržbě, řešení problémů a specifikace produktu.
	Uživatelská příručka k vysavači JIMMY BX7 Pro proti roztočům Komplexní uživatelská příručka pro vysavač JIMMY BX7 Pro Anti-mite, která zahrnuje instalaci, provoz, údržbu, řešení problémů, specifikace a informace o záruce.
	Návod k obsluze akumulátorového vysavače JIMMY H10 Pro Komplexní návod k obsluze bezdrátového vysavače JIMMY H10 Pro, který zahrnuje montáž, provoz, údržbu, řešení problémů a bezpečnostní pokyny pro efektivní úklid domácnosti.
	Uživatelská příručka k vysavači JIMMY BX6 proti roztočům Explore the JIMMY BX6 Anti-mite Vacuum Cleaner with this user guide. Learn about its features, operation, maintenance, and troubleshooting for effective dust mite removal and home cleaning.
	Bezdrátový vysavač JIMMY JV53 Lite: Návod k obsluze a průvodce Oficiální návod k obsluze bezdrátového vysavače JIMMY JV53 Lite. Seznamte se s montáží, obsluhou, nabíjením, údržbou, bezpečností a řešením problémů.
	Uživatelská příručka k vysavači Jimmy JV35 proti roztočům Uživatelská příručka k vysavači proti roztočům Jimmy JV35 s podrobným popisem instalace, použití, čištění, údržby, řešení problémů a specifikací. Vybaven technologií UV světla pro efektivní odstraňování roztočů.

Jimmy BX7 Pro Max