P PANACARE Blood Pressure Monitor User Manual

Zavedení

This user manual provides essential information for the safe and effective operation of your P PANACARE Blood Pressure Monitor. This device is designed for home use to measure systolic and diastolic blood pressure, as well as pulse rate, using an upper arm cuff. It features advanced algorithms and a smart chip for accurate clinical readings, a large 3-color backlit LCD display, dual user memory, and voice broadcast functionality.

Image: The P PANACARE Blood Pressure Monitor, showing the main unit with its large display and control buttons, alongside the upper arm cuff.

Bezpečnostní informace

• Pokud máte jakékoli zdravotní potíže, poraďte se před použitím tohoto zařízení se svým lékařem.
• This device is intended for home use and should not replace professional medical advice or treatment.
• Do not self-diagnose or self-medicate based on the measurement results. Always consult a healthcare professional.
• Udržujte zařízení mimo dosah dětí a domácích zvířat.
• Use only the specified cuff and accessories provided or approved by the manufacturer.
• Vyhněte se měření v jedoucím vozidle nebo během fyzické aktivity.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1x Blood Pressure Monitor (Main Unit)
• 1x Upper Arm Cuff (Adjustable, 8.7-16.5 inches)
• Kabel nabíjení 1x USB
• 1x Přepravní pouzdro
• 1x Uživatelská příručka (tento dokument)

Image: The blood pressure monitor, cuff, and USB cable, illustrating the power options (4 AA batteries not included, USB charging included).

Nastavení

1. Napájení zařízení

The blood pressure monitor can be powered by either 4 AA batteries (not included) or via the included USB charging cable.

• Použití baterií: Open the battery compartment on the back of the unit and insert 4 AA batteries, ensuring correct polarity.
• Použití napájení z USB: Connect the small end of the USB cable to the monitor's USB port and the larger end to a USB power adapter (e.g., phone charger), laptop, or power bank.

2. Připojení manžety

Insert the air tube connector from the cuff firmly into the air jack on the side of the main monitor unit.

3. Initial Settings (Date/Time, Voice)

Press the "SET" button to enter the settings mode. Use the "MEM" button to adjust values and "SET" again to confirm and move to the next setting. You can set the date, time, and toggle the voice broadcast function on or off.

Návod k obsluze

1. Applying the Cuff Correctly

• Ensure you are seated comfortably with your feet flat on the floor and your arm resting on a table, palm facing up.
• Slide the cuff onto your bare upper arm, approximately 1-2 cm above your elbow. The air tube should run down the center of your arm in line with your middle finger.
• Wrap the cuff snugly around your arm, ensuring it is not too tight or too loose. The cuff is designed for arm circumferences between 8.7 and 16.5 inches.
• Umístěte manžetu na úroveň srdce.

Image: A person demonstrating the correct application of the blood pressure cuff on the upper arm, highlighting the adjustable size.

2. Taking a Measurement (One-Button Operation)

• Once the cuff is correctly applied and you are in a relaxed position, press the large "START/STOP" button.
• The cuff will automatically inflate and then slowly deflate. Remain still and silent during the measurement.
• After approximately 30 seconds, your systolic pressure, diastolic pressure, and pulse rate will be displayed on the screen. If voice broadcast is enabled, the results will also be announced.
• The device will automatically shut off after a few seconds of inactivity.

3. Understanding Readings and Display

The 3.4-inch LCD display features clear, oversized numbers and a backlight for easy reading in any lighting condition. The display also incorporates a 3-color backlight system to indicate your blood pressure health level:

• Zelený: Blood pressure below 140 mmHg (Normal)
• Světle žlutá: Blood pressure between 140-180 mmHg (Mild to Moderate Hypertension)
• Červený: Blood pressure above 180 mmHg (Severe Hypertension)

Image: A detailed diagram of the blood pressure monitor's display, labeling systolic, diastolic, pulse, blood pressure classification bar, and control buttons (SET, MEM, START/STOP).

Image: The blood pressure monitor displaying a reading, with an icon indicating the voice broadcast feature is active, showing a speech bubble with "Your systolic pressure is..."

4. Memory Function (Dual User Mode)

The device supports two users simultaneously, storing up to 198 readings (99 for each user) with date and time stamps. This allows for easy tracking of health trends over time.

• To switch between User 1 and User 2, press the "SET" button when the device is off until the user icon changes.
• Na view past readings, press the "MEM" button when the device is off. Repeatedly press "MEM" to scroll through stored data.
• An alarm function can be set to remind you to take measurements at a specific time each day.

Image: Two blood pressure monitors side-by-side, illustrating the dual user memory mode, with different readings displayed for User A and User B.

Údržba

• Čištění: Otřete monitor a manžetu měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte přístroj do vody.
• Skladování: Přístroj skladujte v přepravním pouzdře na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
• Výměna baterie: If using batteries, replace all 4 AA batteries when the low battery indicator appears on the display.

Odstraňování problémů

Specifikace

Záruka a podpora

Your P PANACARE Blood Pressure Monitor comes with a Záruka 12 měsíců od data nákupu.

For any after-sales questions, technical support, or warranty claims, please contact P PANACARE customer service. We are committed to responding to your inquiries within 24 hours.

Please refer to the contact information provided on the product packaging or the official P PANACARE webweb s nejaktuálnějšími informacemi o podpoře.