Návod k obsluze štítu pro motocyklovou helmu Shoei NXR 2 CWR-F2PN

Zavedení

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Shoei NXR 2 Motorcycle Helmet Visor CWR-F2PN. The visor is a critical component for rider safety and comfort, protecting against environmental elements such as wind, rain, insects, and dust. Adhering to these guidelines will ensure optimal performance and prolong the lifespan of your visor.

The CWR-F2PN visor is specifically designed for the Shoei NXR 2 helmet model and features a quick-change mechanism for easy installation and removal. It is also Pinlock-ready, allowing for the retrofitting of a mist-retardant lens for clear vision in various weather conditions.

Bezpečnostní informace

Your safety is paramount. Please read and understand all safety warnings before using the visor.

• Visor Condition: Always inspect your visor for scratches, cracks, or any damage before each ride. A damaged visor can impair vision and compromise safety. Replace it immediately if any damage is found.
• Kompatibilita: Only use visors specifically designed for your Shoei helmet model. Using incompatible visors can lead to improper fit, detachment during riding, or reduced protection. The CWR-F2PN is designed for the Shoei NXR 2.
• Viditelnost: Ensure your visor is clean and clear at all times. Reduced visibility due to dirt, fog, or scratches can lead to dangerous situations.
• Soulad s právními předpisy: This helmet (and by extension, its components like the visor) is DOT approved and FMVSS 218 certified for legal on-road motorcycle use in the United States. Always comply with local regulations regarding helmet and visor use.

Vlastnosti produktu

The Shoei CWR-F2PN visor offers several advanced features for enhanced riding experience:

• Quick-Change Mechanism: Designed for rapid removal and installation without the need for tools.
• Pinlock Ready: Equipped with pins to easily install a Pinlock EVO mist-retardant lens (sold separately) for fog-free vision.
• Visor Locking System: Features a secure locking mechanism to prevent accidental opening at high speeds.
• Integrované větrání: Works in conjunction with the helmet's ventilation system to optimize airflow and reduce fogging.

Image: Shoei NXR 2 Visor CWR-F2PN in Dark Smoke. This image shows the dark smoke tint of the visor, highlighting its sleek design and the Pinlock pins visible on the side.

Nastavení a instalace

The CWR-F2PN visor utilizes Shoei's quick-change mechanism for straightforward installation. Refer to your helmet's specific manual for detailed instructions on visor removal and installation, as procedures may vary slightly by helmet model.

Basic Visor Installation Steps:

1. Příprava helmy: Ensure your helmet is clean and free of debris around the visor base plates.
2. Align Visor: Align the visor's pivot points with the helmet's base plates.
3. Engage Mechanism: Press firmly until you hear a click, indicating the visor is securely locked into place on both sides. Gently pull on the visor to confirm it is properly attached before riding.

Pinlock Lens Installation (Optional):

If installing a Pinlock EVO lens, gently flex the visor to flatten it slightly, then align the Pinlock lens with the pins on the inside of the visor. Press the lens onto the pins until it snaps into place. Ensure the silicone seal of the Pinlock lens is flush against the visor surface.

Operating the Visor

• Otevírání/zavírání: Use the tab located at the bottom center of the visor to smoothly open and close it. The visor has multiple detent positions to allow for partial opening for ventilation.
• Visor Lock: For added security at high speeds, the visor features a locking mechanism. Press the small button near the bottom center of the visor to engage the lock. To unlock, press the button again and lift the visor.
• Větrání: The visor works in conjunction with the helmet's upper and lower vents. Adjust these vents on your helmet to control airflow and prevent fogging.

Note: No official seller videos were available for direct embedding that specifically demonstrate the operation of this visor model.

Údržba a péče

Proper maintenance is crucial for the longevity and clarity of your visor.

• Čištění:
  • Sundejte hledí z helmy.
  • Rinse the visor with lukewarm water to remove loose dirt and debris. Avoid wiping a dry or dusty visor, as this can cause scratches.
  • Use a mild soap (like dish soap) and a soft, clean microfiber cloth to gently clean both sides of the visor.
  • Rinse thoroughly with clean water and air dry or gently pat dry with a clean, soft cloth.
  • Do not use abrasive cleaners, solvents, or window cleaning sprays, as these can damage the visor's coating.
• Pinlock Lens Care: If you have a Pinlock lens installed, remove it before cleaning the main visor. Clean the Pinlock lens separately with lukewarm water and a soft cloth. Do not use soap or harsh chemicals on the Pinlock lens, as this can damage its moisture-absorbing properties. Allow it to air dry completely before re-installing.
• Skladování: Store your helmet and visor in a clean, dry place away from direct sunlight and extreme temperatures.
• Nahrazení: Replace your visor immediately if it becomes scratched, cracked, or otherwise damaged. Even minor damage can significantly reduce visibility and protective capabilities.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information, product support, or to purchase genuine Shoei replacement parts and accessories, please visit the official Shoei website or contact their customer service. Always ensure you are purchasing genuine Shoei products to maintain the safety and integrity of your helmet system.

Více informací a produktů naleznete na Shoei Store on Amazon.