1. Úvod a bezpečnostní informace
This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your Einhell TC-SB 245 L Bandsaw. Read all instructions carefully before use to prevent injury and ensure proper function.
Obecná bezpečnostní upozornění
- Vždy používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí, ochrany sluchu a protiprachové masky.
- Ujistěte se, že pracovní prostor je čistý, dobře osvětlený a bez překážek.
- Udržujte děti a přihlížející v dostatečné vzdálenosti od pracujícího stroje.
- Před prováděním jakýchkoli úprav, výměnou příslušenství nebo údržbou odpojte napájení.
- Never operate the bandsaw with guards removed or damaged.
- Use the provided push bar for feeding small workpieces to maintain a safe distance from the blade.
- Ensure the safety switches on the machine's access doors are functioning correctly. The machine will not start if these doors are not securely closed.
2. Konec produktuview
The Einhell TC-SB 245 L Bandsaw is designed for precise cutting of various materials, primarily wood. It features a robust induction motor and a stable design for consistent performance.
Obrázek 2.1: Konecview of the Einhell TC-SB 245 L Bandsaw, showcasing its red and black housing, saw table, and blade assembly.
Klíčové vlastnosti
- Large, Stable Desk: The aluminum work table provides a generous working surface with a 245 mm gap width, suitable for medium-sized workpieces.
- Integrované LED světlo: Illuminates the work area for improved visibility during operation.
- Infinitely Adjustable Tilting Saw Table: Allows for precise miter cuts.
- Adjustable Angled Fence: Ensures flexibility and accuracy for various cutting angles.
- Výměna pilového kotouče bez použití nářadí: Simplifies blade replacement.
- Durable Induction Motor: Provides strong pulling force, operates smoothly, and requires minimal maintenance.
- Safety Push Bar: Included for safe material handling.
Obrázek 2.2: Detailní view of the saw table, blade, and adjustable fence, highlighting the precision components.
3. Nastavení
3.1 Vybalení a montáž
- Opatrně vyjměte všechny součásti z obalu.
- Inspect all parts for damage. Do not use the machine if any parts are damaged.
- Assemble the stand (if applicable) and securely mount the bandsaw. Ensure the machine is stable on a level surface.
3.2 Saw Blade Installation/Change
The Einhell TC-SB 245 L features a tool-free saw blade change mechanism.
Obrázek 3.1: Příkladample of bandsaw blades, illustrating the type of blade used with this machine.
- Odpojení napájení: Always unplug the machine before changing the blade.
- Open access doors: Unlock and open the upper and lower access doors to expose the blade wheels.
- Release blade tension: Use the tension knob (usually located at the top) to loosen the blade.
- Remove old blade: Carefully remove the old blade from the wheels and blade guides.
- Install new blade: Place the new blade onto the wheels, ensuring the teeth are pointing downwards towards the table. Guide the blade through the upper and lower blade guides.
- Tension blade: Adjust the tension knob until the blade is properly tensioned. Refer to the markings or a tension gauge if available.
- Adjust blade tracking: Rotate the upper wheel by hand to check blade tracking. Adjust the tracking knob (if present) until the blade runs centrally on the wheels.
- Close access doors: Securely close both access doors. The machine will not operate if these doors are not fully closed due to integrated safety switches.
3.3 Adjusting the Saw Table and Fence
Image 3.2: Illustration of the saw table tilting mechanism, indicating its adjustable range for miter cuts.
- Tilting Saw Table: Loosen the locking knob beneath the table to adjust the tilt angle. Use the angle scale for precise settings. Tighten the knob firmly once the desired angle is set.
- Angled Fence: The fence can be adjusted along the table for parallel cuts. Loosen its locking mechanism, slide it to the desired position, and secure it. The fence can also be angled for specific cuts.
Obrázek 3.3: Detail view of the adjustable angled fence, showing its positioning and locking mechanism.
4. Provoz
4.1 Spouštění a zastavování
- Ensure all safety guards are in place and access doors are closed.
- Připojte stroj k vhodné elektrické zásuvce.
- Press the green 'ON' button to start the bandsaw.
- Press the red 'OFF' button to stop the bandsaw.
4.2 Postupy řezání
Image 4.1: A user demonstrating the proper technique for cutting a wooden workpiece on the bandsaw.
- Příprava obrobku: Mark your cut line clearly on the material.
- Adjust Blade Guides: Position the upper blade guide assembly so it is approximately 3-6 mm (1/8-1/4 inch) above the workpiece.
- Spuštění stroje: Turn on the bandsaw and allow the blade to reach full speed before beginning the cut.
- Krmný materiál: Gently feed the workpiece into the blade, following your marked line. Use the push bar for smaller pieces or when hands are close to the blade. Maintain a steady, even pressure.
- Použijte LED světlo: The integrated LED light can be switched on to improve visibility of the cutting line.
Image 4.2: The integrated LED light providing illumination to the cutting area for enhanced precision.
5. Údržba
Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vaší pásové pily.
5.1 Čištění
- Odpojení napájení: Před čištěním stroj vždy odpojte.
- Odsávání prachu: The bandsaw is equipped with a dust extraction port. Connect a suitable dust extractor or shop vacuum to this port during operation to minimize sawdust accumulation.
Image 5.1: Demonstrating the connection of a vacuum hose to the bandsaw's dust extraction port for efficient chip removal.
- Generální úklid: Use a brush or compressed air to remove sawdust and debris from the table, blade guides, and motor vents. Do not use solvents that could damage plastic parts.
5.2 Kontrola a výměna čepele
- Regularly inspect the blade for sharpness, cracks, or missing teeth. A dull or damaged blade can lead to poor cuts and increased risk of kickback.
- Opotřebované nebo poškozené nože ihned vyměňte podle pokynů v části 3.2.
6. Řešení problémů
This section addresses common issues you might encounter with your bandsaw.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stroj se nespustí | Power cord not plugged in; Safety access doors not closed; Faulty power switch. | Check power connection; Ensure all access doors are securely closed; Contact service if switch is faulty. |
| Čepel se potuluje nebo řeže nepřesně | Dull blade; Incorrect blade tension; Improperly adjusted blade guides; Incorrect blade tracking. | Replace blade; Adjust blade tension; Adjust blade guides; Adjust blade tracking. |
| Nadměrné vibrace nebo hluk | Loose components; Damaged blade; Unbalanced wheels. | Check all fasteners; Replace damaged blade; Contact service for wheel balancing. |
If you encounter problems not listed here or if solutions do not resolve the issue, contact Einhell customer support.
7. Specifikace
Technical data for the Einhell TC-SB 245 L Bandsaw (Model 4308036).
| Funkce | Detail |
|---|---|
| Číslo modelu | 4308036 |
| Výrobce | Einhell |
| Hmotnost položky | 24.6 kg |
| Rozměry produktu | 53.5 x 42 x 83.5 cm |
| Zdroj napájení | Elektrický kabel |
| Materiál rukojeti | Hliník |
| Materiál čepele | Carbon Steel (Kohlenstoffstahl) |
| Speciální funkce | Brushless (Bürstenlos) |
| Zahrnuté komponenty | Holý nástroj |
8. Záruka a podpora
Informace o záruce naleznete v záručním listu, který je součástí vašeho produktu, nebo navštivte oficiální webové stránky společnosti Einhell. webwebu. Uschovejte si účtenku jako doklad o koupi.
For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Contact details can typically be found on the Einhell webwebu nebo v dokumentaci k produktu.
