SEAGO SG8019 Cordless Water Dental Flosser User Manual

Zavedení

Thank you for choosing the SEAGO SG8019 Cordless Water Dental Flosser. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before first use and retain it for future reference.

Image: The SEAGO SG8019 Cordless Water Dental Flosser in purple, displayed with its packaging, seven different nozzles, and a USB charging cable.

Důležité bezpečnostní informace

Před použitím tohoto produktu si prosím pečlivě přečtěte všechny pokyny.

• Do not use the device if any part is broken or damaged. Contact customer support for assistance.
• Keep the device out of reach of children. This product is not intended for use by children without adult supervision.
• Consult a dental professional before use if you have certain medical conditions or have recently undergone oral surgery.
• Always follow proper charging and battery handling instructions to prevent hazards.
• Do not immerse the charging base in water. The flosser itself is IPX7 waterproof, but the charging port should be dry before charging.
• Use only water or dentist-recommended mouthwash in the water tank. Do not use corrosive or abrasive cleaning agents.

Komponenty produktu

The SEAGO SG8019 Water Dental Flosser comes with the following components:

• 1 x SEAGO SG8019 Cordless Water Dental Flosser Unit
• 4 x Standard Nozzles (for daily deep oral cleaning)
• 2 x Orthodontic Nozzles (suitable for braces, dental implants, and bridges)
• 1 x Tongue Scraper Nozzle (for tongue coating cleaning and fresher breath)
• 1 x USB nabíjecí kabel
• 1 x cestovní pouzdro

Obrázek: Detailní záběr view of the seven included nozzles: four standard tips, two orthodontic tips, and one tongue cleaner tip, designed for various oral care needs.

Pokyny pro nastavení

1. Počáteční nabíjení: Before first use, fully charge the device for approximately 8 hours. Connect the USB charging cable to the flosser's charging port and a suitable USB power adapter (not included). The battery indicator light will show charging status. A full charge provides up to 30 days of battery life.
2. Připojte trysku: Insert your desired nozzle into the hole at the top of the flosser handle until it clicks into place. To remove, press the nozzle release button (usually located on the back or side of the unit) and pull the nozzle out.
3. Naplňte nádrž na vodu: The 300ml water tank can be filled in two ways:
   • Open the top cap of the water tank and pour warm water directly into the reservoir.
   • Detach the entire water tank from the main unit by twisting or pulling down (refer to product diagram for specific mechanism) and fill it under a faucet.
   Ensure the tank is securely reattached if removed.

Image: Demonstrates two ways to refill the 300ml water tank (top cap and full detachment) and two ways to open the tank for cleaning, highlighting ease of use.

Návod k obsluze

1. Vyberte režim: Press the 'M' (Mode) button to cycle through the 5 available cleaning modes:
   • Silný: Pro hloubkové čištění.
   • Normální: For daily usage.
   • Masáž: To massage gums.
   • Střílet: For targeted cleaning of stubborn plaque.
   • DIY: Customize water pressure manually.
   The device has an automatic memory function that will recall your last used mode.
2. Umístění: Lean over a sink. Place the nozzle tip into your mouth, pointing it towards your teeth and gum line. Keep your mouth slightly open to allow water to flow into the sink.
3. Začněte používat zubní nitě: Press the Power button to turn on the device. For 'Shoot' mode, press and hold the Power button to spray water, and release to stop.
4. Technika používání nitě: Guide the water jet along your gum line and between each tooth. Focus on cleaning all areas of your mouth. The device will automatically shut off after 2 minutes of continuous use.
5. DIY Mode Adjustment: In DIY mode, press and hold the 'M' (Mode) button to adjust the water pressure from minimum to maximum, then release when the desired pressure is reached.
6. Dokončit: After flossing, turn off the device by pressing the Power button. Empty any remaining water from the tank.

Image: The control panel of the flosser, illustrating the five personalized cleaning modes and their functions.

Image: A visual guide demonstrating the three steps to effectively use the 'Shoot' mode for targeted cleaning.

Údržba a čištění

• Po každém použití: Empty any remaining water from the tank. Run the flosser for a few seconds with clean water to flush out any residue.
• Nádrž na čistou vodu: The 300ml water tank is detachable for easy cleaning. Regularly detach and rinse the tank with warm water. For thorough cleaning, you can use a mild soap and water solution, then rinse completely.
• Čisté trysky: Rinse nozzles under running water after each use. Replace nozzles every 3 months or sooner if they show signs of wear.
• Čištění hlavní jednotky: Otřete vnější povrch zubní nitě měkkým hadříkemamp cloth. Do not use abrasive cleaners or immerse the main unit in water (except for the IPX7 waterproof rating, avoid prolonged submersion, especially the charging port area).
• Skladování: Store the flosser in a cool, dry place, away from direct sunlight. Ensure the water tank is empty before storing for extended periods.

Odstraňování problémů

Image: The battery indicator light on the flosser, which blinks red when the battery level is below 30%, signaling it's time to recharge.

Specifikace produktu

Záruka a podpora

For warranty information or technical support, please refer to the warranty card included with your product or contact SEAGO customer service directly. Contact details can typically be found on the product packaging or the official SEAGO webmísto.

Právní prohlášení: Prohlášení týkající se doplňků stravy nebyla hodnocena Úřadem pro kontrolu potravin a léčiv (FDA) a nejsou určena k diagnostice, léčbě ani prevenci jakékoli nemoci nebo zdravotního stavu. Tento produkt je určen pouze pro účely ústní hygieny.