Zavedení
The Fender Bassman Reverb Pedal is designed to provide bass-tuned room and hall reverb effects, enhancing your instrument's tone with depth and space. This pedal incorporates meticulously crafted analog and digital circuits to deliver professional-grade reverb while maintaining low-end clarity. Its compact design makes it suitable for any pedalboard.
Klíčové vlastnosti
- Bass-tuned room and hall reverb DSP algorithms with analog dry-through.
- Low cut knob and pre-delay switch to maintain signal clarity.
- Vnitřní damp control for adjusting the high frequency content of the reverb signal.
- Soft-touch switchable true or buffered bypass with trails.
- Side-mounted pad switch to suit active basses.
Nastavení
Before connecting the pedal, ensure your amplifier and other effects are powered off. Use high-quality instrument cables for optimal signal integrity.
Spojení
- Připojte baskytaru k VSTUP zvedák na pedálu.
- Připojte VÝSTUP zvedák pedálu k vašemu ampvstup od lifiera.
- Connect a 9V DC power supply (center-negative) to the 9V DC IN zvedák.

Obrázek 1: Zadní view of the pedal with input, output, and power connections.
The rear of the pedal features clearly labeled input, output, and power jacks for easy connection to your instrument and ampživější.
Provozní ovládací prvky
The Bassman Reverb Pedal features intuitive controls for shaping your desired reverb sound. Familiarize yourself with each knob and switch to unlock the pedal's full potential.

Obrázek 2: Nahoře view of the pedal's control layout.
Knoflíky
- ČAS: Adjusts the length of the reverb decay. Turn clockwise for longer, more expansive reverb tails.
- NÍZKÝ STŘIH: Controls the amount of low frequencies removed from the reverb trails. This helps prevent muddiness and maintains bass clarity.
- ÚROVEŇ: Sets the overall output volume of the reverb effect.
Spínače
- TYP: Selects between different reverb algorithms (e.g., Room, Hall). Refer to the description for specific algorithm details.
- PŘED: Engages or disengages the pre-delay function, which introduces a slight delay between the dry signal and the onset of the reverb. This can add clarity to individual notes.
Vnitřní kontroly
- DAMP Řízení: An internal control that adjusts the high-frequency content of the reverb signal. This allows for fine-tuning the brightness or darkness of the reverb.
- Bypass Switch (True/Buffered): The pedal offers soft-touch switchable true or buffered bypass with trails. This setting can typically be adjusted via an internal switch or specific power-up sequence. Consult the full technical manual for detailed instructions on changing bypass modes.
Side-Mounted Switch
- Přepínač PAD: A side-mounted switch designed to accommodate active basses by providing an input pad, preventing signal overload.
Napájení pedálu
The Bassman Reverb Pedal operates on a standard 9V DC power supply (center-negative). Ensure the power supply meets the specified voltage and polarity requirements to avoid damage to the unit.
- svtage: 9 voltů
- Amperage: 100 miliamps (minimum recommended)
- Zdroj napájení: Battery Powered (internal 9V battery) or external DC power supply.
Údržba
To ensure the longevity and optimal performance of your Bassman Reverb Pedal, follow these maintenance guidelines:
- Čištění: K čištění vnější strany pedálu používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Skladování: Pedál skladujte v suchém a chladném prostředí mimo dosah přímého slunečního záření a extrémních teplot.
- Výměna baterie: If using a battery, replace it when the indicator light dims or the effect performance degrades. Disconnect the input cable when not in use to conserve battery life.
- Spojení: Pravidelně kontrolujte všechny kabelové spoje, zda nejsou pevně utažené a opotřebované.
Odstraňování problémů
If you experience issues with your pedal, try the following steps:
- Žádný zvuk: Check all cable connections, power supply, and ensure the pedal is engaged. Test with different cables and power supply if possible.
- Weak/Distorted Sound: Verify the input signal level (especially with active basses and the PAD switch). Check battery life if applicable.
- Nadměrný hluk: Ensure you are using a high-quality, isolated power supply. Check for ground loops in your signal chain.
- Efekt není poutavý: Ensure the footswitch is functioning correctly. If in buffered bypass mode, check the internal bypass setting.
Specifikace
| Specifikace | Detail |
|---|---|
| Hmotnost položky | 11.5 unce |
| Rozměry produktu | 5 x 3 x 2.5 palce |
| Číslo modelu položky | 0234613000 |
| ASIN | B0D7FPX2LW |
| Typ konektoru | 1/4" Mono Phone Plug (6.35mm) |
| Hardwarové rozhraní | 1/4palcový zvuk |
| Formát signálu | Analogový |
| Typ materiálu | Hliník |
| Zdroj napájení | Napájení z baterie |
| svtage | 9 voltů |
| Ampvymazat | 100 miliamps |
| Efekty zvukového výstupu | Reverb |
Záruka a podpora
For warranty information, technical support, or service inquiries, please refer to the official Fender website or contact your authorized Fender dealer. Keep your purchase receipt as proof of purchase.