Hatteker Electric Men Shaver Replacement Blade Nets User Manual

1. Konec produktuview

This manual provides essential information for the installation, operation, and maintenance of your Hatteker Electric Men Shaver Replacement Blade Nets. These replacement blade nets are specifically designed for Hatteker Electric Shaver Models RSCW-767 and HT-602, ensuring optimal performance and a comfortable shaving experience.

Obrázek 1.1: Three gold-colored Hatteker shaver replacement blade nets, designed for models RSCW-767 and HT-602. Each net features a fine mesh pattern for efficient hair capture and a smooth shave.

2. Bezpečnostní informace

Please read all safety instructions carefully before using or handling the replacement blade nets. Failure to follow these instructions may result in injury or damage to the product.

• Ostré čepele: The replacement blade nets contain very sharp components. Handle with extreme care to avoid cuts or injuries.
• Uchovávejte mimo dosah dětí: Store the blade nets and the shaver out of reach of children.
• Zamýšlené použití: Use these replacement blade nets only for their intended purpose with Hatteker Electric Shaver Models RSCW-767 and HT-602.
• Inspekce: Before each use, inspect the blade nets for any signs of damage or wear. Do not use if damaged.

3. Nastavení a instalace

Follow these steps to properly install the new replacement blade nets into your Hatteker electric shaver.

1. Vypnout: Ensure your Hatteker electric shaver is turned off and unplugged from any power source.
2. Remove Old Blade Nets: Gently press the release buttons (if applicable) or twist the shaver head to remove the old blade nets. Refer to your shaver's original manual for specific instructions on removing the shaver head.
3. Clean Shaver Head: Clean any hair residue or debris from the shaver head area before installing new nets. A small brush can be used for this purpose.
4. Install New Blade Nets: Carefully align the new gold replacement blade nets with the shaver head. Press them firmly into place until you hear a click, indicating they are securely fastened. Ensure the nets are seated correctly and do not wobble.
5. Testovací uložení: Gently shake the shaver to ensure the blade nets are securely attached.

4. Návod k obsluze

Once the new blade nets are installed, your shaver is ready for use. For optimal shaving results, follow these general guidelines:

• Nabíjení baterie: Ensure your shaver's battery is fully charged before use.
• Suché holení: For best results, use the shaver on dry skin.
• Jemný tlak: Apply light, even pressure to your skin. Do not press too hard, as this can cause irritation and reduce the lifespan of the blade nets.
• Kruhové pohyby: Move the shaver in small, circular motions against the direction of hair growth for a close shave.
• Čistěte po každém použití: Refer to the Maintenance section for cleaning instructions.

5. Údržba a čištění

Regular cleaning and maintenance will prolong the life of your replacement blade nets and ensure consistent performance.

1. Denní úklid: After each shave, turn off and unplug the shaver. Remove the blade nets and tap out any loose hair. Use the provided cleaning brush to remove stubborn hair from both the nets and the shaver body.
2. Oplachování (pokud je to relevantní): If your shaver is waterproof, you may rinse the blade nets under running water. Ensure they are completely dry before reattaching them to the shaver. Do not rinse the shaver body unless explicitly stated in your shaver's original manual.
3. Hloubkové čištění: Periodically, perform a more thorough cleaning. This may involve disassembling the blade nets further (if designed for it) and cleaning with a mild soap solution. Rinse thoroughly and allow to air dry completely.
4. Mazání: Some shavers benefit from occasional lubrication of the cutting elements. Refer to your shaver's original manual for specific lubrication instructions.
5. Skladování: Store the shaver with the blade nets attached in a clean, dry place, away from direct sunlight and extreme temperatures.

6. Řešení problémů

If you encounter issues with your shaver after installing the new blade nets, consider the following common solutions:

If the problem persists after trying these solutions, please contact Hatteker customer support.

7. Specifikace produktu

8. Záruka a podpora

For information regarding product warranty, returns, or technical support, please refer to the original purchase documentation or contact Hatteker customer service directly.

Hatteker Customer Service:

• Please visit the official Hatteker webstránky s nejaktuálnějšími kontaktními informacemi.
• Refer to your product packaging for any specific support contact details.