Důležité bezpečnostní informace
Please read all instructions carefully before using this electric fireplace heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Retain this manual for future reference.
- Ujistěte se, že je zásuvkatage matches the rating of the heater.
- Do not operate the heater with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
- Hořlavé materiály, jako je nábytek, polštáře, ložní prádlo, papíry, oblečení a záclony, udržujte alespoň 0.9 metru od přední části topení a dále od boků a zadní části.
- Nepoužívejte ohřívač v koupelnách, prádelnách ani podobných vnitřních prostorách, kde by mohl přijít do kontaktu s vodou.
- Pokud ohřívač nepoužíváte, vždy jej odpojte.
- Do not insert or allow foreign objects into any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- Tento spotřebič je vybaven a Certifikace CSA, ensuring it meets safety standards.
- The heater includes ochrana proti přehřátí, which automatically shuts off the unit if it reaches an unsafe temperature.
- Také obsahuje ochrana proti převrácení, automatically shutting down if tilted more than 45 degrees.
Obsah balení
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or operate the heater. Contact customer support for assistance.
- Silonn Electric Fireplace Heater Unit
- 4x Nohy
- Šrouby pro upevnění nohou
- Phillips Screwdriver (for assembly)
Pokyny pro nastavení
Follow these steps to set up your electric fireplace heater.
- Rozbalte jednotku: Carefully remove the electric fireplace heater and all components from the packaging. Retain packaging for future storage or shipping.
- Připevněte nohy: Place the main heater unit upside down on a soft, non-abrasive surface to prevent scratching. Align each of the four legs with the designated mounting points on the bottom of the heater. Secure each leg using the provided screws and Phillips screwdriver. Ensure all screws are tightened securely.
- Umístěte ohřívač: Once the legs are attached, carefully turn the heater upright and place it on a firm, level surface. Ensure there is adequate clearance from walls, furniture, and other combustible materials (at least 3 feet). Do not block the air intake or exhaust vents.
- Připojení k napájení: Plug the power cord into a grounded 120V AC outlet. Ensure the outlet is in good condition and not overloaded with other appliances.
Návod k obsluze
Your Silonn Electric Fireplace Heater offers both heating and a realistic flame effect. The control panel is located on the side of the unit.
Konec ovládacího paneluview
- Ovládací knoflík teploty: A rotary knob used to adjust the desired room temperature from 62°F to 82°F. The heater will cycle on and off to maintain the set temperature.
- Vypínač: Controls the main power to the unit, including the flame effect.
- Heat Switch: Activates or deactivates the heating function. This allows you to enjoy the flame effect without heat.
Základní operace
- Zapnout: Flip the Power Switch to the 'ON' position. The realistic 3D flame effect will illuminate.
- Aktivace tepla: To enable heating, flip the Heat Switch to the 'ON' position.
- Nastavit teplotu: Rotate the Temperature Control Knob to your desired temperature setting between 62°F and 82°F. The heater will begin to emit warm air.
- Adjust Flame Only: If you wish to enjoy only the flame effect without heat, ensure the Power Switch is 'ON' and the Heat Switch is 'OFF'.
- Vypnout: To turn off the heater, first flip the Heat Switch to 'OFF' (if heating was active), then flip the Power Switch to 'OFF'. For extended periods of non-use, unplug the unit from the wall outlet.
Údržba
Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho elektrického krbového kamna.
- Čištění: Před čištěním vždy odpojte ohřívač ze zásuvky a nechte jej zcela vychladnout. Použijte měkký,amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, sprays, or harsh chemicals. Ensure no water enters the interior of the heater.
- Odstranění prachu: Periodically use a vacuum cleaner with a brush attachment to clean the air intake and exhaust vents to prevent dust buildup, which can affect heating efficiency.
- Skladování: Pokud se ohřívač delší dobu nepoužívá, skladujte jej na chladném a suchém místě, nejlépe v originálním obalu, mimo dosah přímého slunečního záření a vlhkosti.
Odstraňování problémů
If you encounter issues with your Silonn Electric Fireplace Heater, refer to the following common problems and solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ohřívač se nezapne. | No power to the unit; Power switch is off; Overheat protection activated; Tip-over protection activated. | Check if the unit is plugged in securely. Ensure the wall outlet is functional. Flip the Power Switch to 'ON'. If the unit was recently overheated or tipped, unplug it, wait 10-15 minutes for it to reset, and then plug it back in. |
| Žádné teplo, ale funguje efekt plamene. | Heat switch is off; Temperature setting is too low. | Flip the Heat Switch to 'ON'. Increase the Temperature Control Knob setting to a higher temperature. |
| Topidlo produkuje nedostatečné teplo. | Room size is too large for the heater's capacity; Air vents are blocked. | Ensure the heater is appropriate for the room size. Clear any obstructions from the air intake and exhaust vents. |
| Neobvyklý zvuk nebo zápach. | Dust buildup; Internal component issue. | Unplug the unit and clean the vents. If the issue persists, discontinue use and contact customer support. |
If the problem persists after attempting these solutions, please contact Silonn customer support for further assistance.
Specifikace
| Značka | Silonn |
| Název modelu | SLELF01B-18 |
| Rozměry produktu (D x Š x V) | 14.8 cm x 8.98 cm x 18.03 cm |
| Wattage | 1400W |
| Materiál | Cold Rolled Plate |
| Hmotnost položky | 13.88 libry |
| UPC | 810158822979 |
| Bezpečnostní certifikace | Certifikováno CSA |
| Úroveň hluku | Pod 37 dB |
Záruka a podpora
For warranty information, please refer to the documentation included with your purchase or contact Silonn customer support directly. Details regarding product registration, warranty claims, and technical assistance can typically be found on the manufacturer's official webwebu nebo kontaktováním jejich oddělení zákaznických služeb.
For further assistance or inquiries, please visit the official Silonn webnebo kontaktujte jejich tým zákaznické podpory.
