Uživatelská příručka k dronu Sky Viper Dash Nano

Zavedení

The Sky Viper Dash Nano drone is designed for ease of use and impressive performance within its class. Capable of speeds up to 25 mph, it incorporates flight technology typically found in racing drones. Flight assist features simplify operation for both casual flyers and beginners, allowing for directional control with a single stick and stable hovering. Its compact size makes it suitable for safe indoor flying.

Co je v krabici

Upon unboxing your Sky Viper Dash Nano Drone, please verify that all components listed below are included:

• Sky Viper Dash Nano Drone
• Dálkové ovládání
• Rechargeable Battery (pre-installed in drone)
• Nabíjecí kabel (USB)
• Produktový manuál
• Extra Propellers (as shown in image)

Image: All included components of the Sky Viper Dash Nano Drone.

Bezpečnostní informace

Nebezpečí udušení – malé části: This product contains small parts and is not suitable for children under 3 years of age. Adult supervision is required during operation to ensure safe use and prevent injury, especially to eyes. Always operate the drone in an open area free from obstacles, people, and pets. Ensure propellers are clear before launching. Read all enclosed instructions, warnings, and precautions before operating.

Nastavení

Nabíjení baterie

The Sky Viper Dash Nano Drone includes a rechargeable Lithium Polymer battery. Use the provided USB charging cable to charge the drone. Connect the small end of the charging cable to the drone's charging port and the USB end to a compatible USB power source (e.g., computer USB port, USB wall adapter). The indicator light on the charging cable will show charging status. Ensure the drone is turned off during charging.

Instalace baterie ovladače

The remote controller requires 3 AAA (LR03) 1.5V batteries (not included). Open the battery compartment on the back of the controller, insert the batteries observing correct polarity (+ and -), and close the compartment securely.

Pairing Drone and Remote

To pair the drone with its remote control:

1. Ensure both the drone and the remote control are powered off.
2. Place the drone on a flat, level surface for calibration.
3. Turn on the drone using its small on/off switch. The drone's lights will begin to flash.
4. Turn on the remote control. The remote's indicator light will also flash.
5. Move the left joystick (throttle) all the way up, then all the way down. The drone and remote lights will turn solid, indicating successful pairing.

Návod k obsluze

Letové režimy

The Dash Nano Drone offers dual flight modes to suit different skill levels:

• Normální režim: Ideal for beginners, providing stable and forgiving flight characteristics.
• Sportovní režim: For more experienced pilots, offering increased agility and speed for advanced maneuvers.

Image: Remote control highlighting the Normal and Sport flight mode selection.

Auto Launch and Land

The drone features convenient one-button auto launch and land functions:

• Automatické spuštění: Press the "Launch" button on the remote to initiate a smooth, automatic takeoff and hover.
• Automatické přistání: Press the "Land" button to command a gentle, controlled descent and landing.

Image: Visual representation of the drone's auto-launch and auto-land features.

Stunty jedním dotykem

Perform impressive aerial stunts with ease using the one-touch stunt feature. Consult the remote control diagram in the included manual for the specific stunt button location. Typically, you hold the stunt button and then tap the right stick in the desired direction to execute a flip or roll.

Image: The Sky Viper Dash Nano Drone executing a 360-degree flip.

Údržba

Výměna vrtule

In the event of damage to a propeller, replacements are included in the package. Carefully remove the damaged propeller by gently pulling it upwards from its motor shaft. Align the new propeller with the motor shaft and press down firmly until it is securely seated. Ensure the correct propeller type (A or B) is installed on the corresponding motor as indicated in the drone's main manual.

Image: The drone, remote, charging cable, and a bag of extra propellers.

Čištění

To maintain optimal performance, periodically clean the drone with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Ensure no debris is lodged in the motors or around the propellers.

Odstraňování problémů

If you encounter issues with your Sky Viper Dash Nano Drone, consider the following common solutions:

• Dron nereaguje: Ensure both the drone and remote control are fully charged and properly paired. Re-attempt the pairing process if necessary.
• Nestabilní let/driftování: Place the drone on a flat, level surface and perform a calibration as described in the pairing section. Check for any damaged or bent propellers and replace them if needed.
• Krátká doba letu: Ensure the drone's battery is fully charged. Battery life can vary based on flight intensity and environmental factors.
• Vrtule se neotáčejí: Check for any obstructions around the propellers or motors. Ensure the drone is powered on and paired.
• Loss of control after impact: If the drone hits an object and becomes unresponsive or flies erratically, turn it off and then on again, and re-pair with the remote. This can reset its internal sensors.

Specifikace

Záruka a podpora

Specific warranty details for the Sky Viper Dash Nano Drone are not provided within the product listing. For comprehensive warranty information, technical support, or to inquire about replacement parts, please visit the official Sky Viper website or contact Skyrocket customer service directly. Retain your proof of purchase for any warranty claims.